4 layers40 × 40 mm
2 layers176.7 × 57.6 mm
HB LC DimPWM PCB
Manawyrm/HB-LC-DimPWM-PCB- Size
- 176.7 × 57.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 243
- Nets
- 182
- Pads
- 704
- Tracks, vias
- 748, 913
- Pours
- 77
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Mar 2020
- Updated
- 22 Apr 2020
Overview
HB LC DimPWM PCB is an open-source printed circuit board by Manawyrm, from the Manawyrm/HB-LC-DimPWM-PCB repository on GitHub. It is a 2-layer board of 176.7 × 57.6 mm with 243 parts on 182 nets, routed with 748 tracks and 913 vias.
It is built around the AMS1117-3.3, BSS84 and S9013, with the VS5810AS among its other parts. Its parts include 67 resistors, 64 capacitors, 64 transistors, 19 fuses and 16 inductors. It belongs with the STM32 boards of this library.
Main components
4
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSS84
SOT-23-55℃~+150℃ 1 P-Channel 130mA 2.8pF 24.6pF 2V 3.2Ω@5V 300mW 4.7pF 50V 590pC@10V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsS9013
SOT-23-55℃~+150℃ 1 NPN 100nA 120 150MHz 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
VS5810AS
SOP-8-55℃~+150℃ 1 N-channel 1.545nF 130pF 15A 1V 3.1W 33nC@10V 55V 9.5mΩ@4.5V SOP-8 MOSFETs ROHSVergigaMOSFETs
README
README.mdHomeBrew 16 channel dimmer
Parts
243| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 22R | Resistor_SMD:R_0603_1608Metric | R14, R15, R16, R17, R18, R19, R28, R29, R30, R31, R32, R33, R34, R35, R44, R45 +16 |
| 17 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R4, R8, R10, R20, R21, R22, R23, R36, R37, R38, R39, R52, R53, R54, R55 +1 |
| 17 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C13, C14, C15, C16, C25, C26, C27, C28, C37, C38, C39, C40, C49, C50, C51 +1 |
| 16 | 100p | Capacitor_SMD:C_0805_2012Metric | C17, C18, C19, C20, C29, C30, C31, C32, C41, C42, C43, C44, C53, C54, C55, C56 |
| 16 | 15V 5A | Fuse:Fuse_2920_7451Metric | F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, F13, F14, F15, F16, F17 |
| 16 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R11, R12, R13, R24, R25, R26, R27, R40, R41, R42, R43, R56, R57, R58, R59 |
| 16 | 1uF | Capacitor_SMD:C_1206_3216Metric | C21, C22, C23, C24, C33, C34, C35, C36, C45, C46, C47, C48, C57, C58, C59, C60 |
| 16 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q9, Q11, Q22, Q24, Q26, Q28, Q38, Q40, Q42, Q44, Q54, Q56, Q58, Q60 |
| 16 | 3.3uH | Inductor_Sunlord:SMD-PIND-10.5x11.5x4_2.5x3.0 | L1, L2, L3, L4, L5, L6, L7, L8, L9, L10, L11, L12, L13, L14, L15, L16 |
| 16 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q2, Q8, Q10, Q12, Q21, Q23, Q25, Q27, Q37, Q39, Q41, Q43, Q53, Q55, Q57, Q59 |
| 16 | S9013 | Package_TO_SOT_SMD:SOT-23 | Q1, Q5, Q6, Q7, Q17, Q18, Q19, Q20, Q33, Q34, Q35, Q36, Q49, Q50, Q51, Q52 |
| 16 | VS5810AS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q13, Q14, Q15, Q16, Q29, Q30, Q31, Q32, Q45, Q46, Q47, Q48, Q61, Q62, Q63, Q64 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C7, C10, C11 |
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C61, C62, C63, C64 |
| 4 | Conn_01x05_Male | Connector_Wago:Wago_734-165_1x05_P3.50mm_Horizontal | J3, J4, J5, J6 |
| 3 | 500mA | Fuse:Fuse_2512_6332Metric | F1, F18, F19 |
| 2 | 20pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | ToolingHole | ToolingHole:ToolingHole_JLCSMT | H1, H2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_8x6.7 | C8 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 12V Input | Connector_Wago_714:Wago_714-162_1x02_P3.50mm_Horizontal | J2 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123 | D1 |
| 1 | HomeMatic-sensor | HomeMatic-sensor:HomeMatic-sensor | U3 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers25.4 × 80.2 mm
RedPill board
simonyiszk/STM32-RedPill
STM32-based development board with integrated ST-LINK/V2 compatible programmer, to be used on SEM advanced courses.
63 parts1CERN-OHL-W-2.0 - 4 layers22.4 × 70.5 mm
- 4 layers36.8 × 95.3 mm
STM32F401
thecasterian/STM32F401-Playground
Have fun with an STM32F401 breakout board
67 partsBSD-3-Clause - 2 layers100 × 60 mm
Number
yzxoi/stm32-ir-linescan-digit-recognizer
An STM32G0B1-based 8-channel infrared line-scan digit recognizer with custom KiCad hardware, USB-UART acquisition, Q15 preprocessing, and TinyML inference.
55 partsMIT - 2 layers44.2 × 29.3 mm
- 2 layers89.6 × 79 mm
TDR 5351 core
MR-DOS/TDR_diploma_thesis
Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.
199 parts33GPL-3.0 - 2 layers259.5 × 60.7 mm
1512hh control
larryqiann/AP1512HH-ESP32
Coway AP1512HH Main Board replacement with ESP32
71 parts29CERN-OHL-P-2.0
Questions
How big is the HB LC DimPWM PCB PCB?
It measures 176.7 × 57.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HB LC DimPWM PCB use?
243 parts, built around the AMS1117-3.3, BSS84, S9013 and VS5810AS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HB LC DimPWM PCB KiCad files?
From the Manawyrm/HB-LC-DimPWM-PCB repository on GitHub, at the commit this page was made from: the board is HB-LC-DimPWM-PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HB LC DimPWM PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Manawyrm before reusing the design.