

Marrionette Driver
Antigravity system for Testing
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 124
- Pads
- 462
- Tracks, vias
- 1,006, 111
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Feb 2026
- Updated
- 11 May 2026
Overview
Marrionette Driver is an open-source printed circuit board by Magma-Space, from the Magma-Space/Marionette repository on GitHub. It is a 4-layer board with 106 parts on 124 nets, routed with 1,006 tracks and 111 vias.
It is built around the CP2102N-A01-GQFN28R, ESP32-WROOM-32 and TSR 1-2450, with the AO3400A, ESD05V88D-LC and S8050 among its other parts. Its parts include 24 capacitors, 22 resistors, 16 ICs, 12 connectors and 10 transistors. It belongs with the ESP32 boards of this library.
Main components
6CP2102N-A01-GQFN28R
QFN-28-EP(5x5)-40℃~+85℃ 13.7mA 195uA 3Mbps 3V~3.6V Transceiver USB 2.0 QFN-28-EP(5x5) USB Converters ROHSSilicon LabsUSB ConvertersESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTSR 1-2450
SIP,11.6x7.5mm-40℃~+85℃ 10.2mm 11.6mm 1A 2200uF 300uA 50mVp-p 5V 7.5mm 7V~36V 850kHz 94% Short Circuit Protection、Automatic fault recovery ±1% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsESD05V88D-LC
DFN1006-20.22pF 110W@8/20us 23V 500nA 5V 6V ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 DFN1006-2 ESD and Surge Protection (TVS/ESD) ROHSLeiditechESD And Surge Protection (TVS/ESD)S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 8 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J11 |
| 8 | INA260 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U1, U2, U3, U4, U5, U6, U7, U8 |
| 5 | LED | LED_SMD:LED_0402_1005Metric | D5, D6, D7, D8, D9 |
| 5 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | +3.3, +5V, EN, SCL, SDA |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9, C10, C11, C12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | TC4427xOA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9, U10, U11, U12 |
| 3 | 0R(1%) | Resistor_SMD:R_0402_1005Metric | R1, R2, R16 |
| 3 | 10uF/25V(10%) | Capacitor_SMD:C_0603_1608Metric | C13, C15, C22 |
| 3 | 12K(1%) | Resistor_SMD:R_0402_1005Metric | R5, R6, R8 |
| 3 | 1nF/50V(10%) | Capacitor_SMD:C_0402_1005Metric | C17, C18, C19 |
| 3 | 2k | Resistor_SMD:R_0402_1005Metric | R29, R30, R31 |
| 2 | 0.1uF/25V(10%) | Capacitor_SMD:C_0402_1005Metric | C14, C16 |
| 2 | 0R(1%)(NC) | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 4.7K(1%) | Resistor_SMD:R_0402_1005Metric | R12, R14 |
| 2 | 470R(1%) | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 5K(1%)(NC) | Resistor_SMD:R_0402_1005Metric | R11, R13 |
| 2 | ESD05V88D-LC | Diode_SMD:D_0402_1005Metric | D1, D3 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | S8050 | Package_TO_SOT_SMD:SOT-23 | Q9, Q10 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | Boot1, Reset1 |
| 1 | 100uF/6.3V(20%) | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R33 |
| 1 | 10uF/25V(10%)(NC) | Capacitor_SMD:C_0402_1005Metric | C23 |
| 1 | 1N5819 | Diode_SMD:D_0402_1005Metric | D2 |
| 1 | 1uF/10V(10%) | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 22uF/25V(10%) | Capacitor_SMD:C_0603_1608Metric | C24 |
| 1 | 2K(1%) | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 3.3K(1%)(NC) | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 470R(1%) | Capacitor_SMD:C_0402_1005Metric | R7 |
| 1 | 5k | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Kycon_KLDX-0202-xC_Horizontal | J3 |
| 1 | CP2102N-A01-GQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U13 |
| 1 | Conn_01x02_Male | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Conn_02x06_Counter_Clockwise | Connector_PinSocket_1.27mm:PinSocket_2x06_P1.27mm_Vertical | J1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U14 |
| 1 | NCP1117-3.3_TO252 | Package_TO_SOT_SMD:SOT-223 | U16 |
| 1 | RED LED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | TSR_1-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U15 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J12 |
Similar boards
- 4 layers151.1 × 100.3 mm

- 2 layers70 × 65 mm

Fluepdot
Fluepke/Fluepdot
Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe
116 parts17AGPL-3.0 - 2 layers50 × 60 mm

RespiratorIF
DigitalRealitiesLab/AirResMask
AirRes Mask: A Precise and Robust Virtual Reality Breathing Interface Utilizing Breathing Resistance as Output Modality
48 parts3MIT - 2 layers35 × 45 mm

LVGLDevKit
jppang/ESP32_MicroPython_LVGL_ST7789
Try to build an ESP32 firmware with LVGL and ST7789 drivers inside.
40 parts2 - 2 layers100 × 57 mm

- 2 layers65 × 30 mm

Epaper
TDA-2030/E-ink-screen
An assistant to help you view text and picture calendars
56 parts33Apache-2.0 - 4 layers47 × 34 mm

Esp32c3 devboard
tmilkovic51/esp32c3_devboard
A development board integrating the socket for easily swapping the ESP32-C3-WROOM-02 modules, designed in KiCad
72 parts3 - 2 layers47.8 × 37.3 mm

Questions
What parts does the Marrionette Driver use?
106 parts, built around the CP2102N-A01-GQFN28R, ESP32-WROOM-32, TSR 1-2450 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Marrionette Driver KiCad files?
From the Magma-Space/Marionette repository on GitHub, at the commit this page was made from: the board is Marionette_SCH/Marrionette_Driver/Marrionette_Driver.kicad_pcb and its schematic Marionette_SCH/MCU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Marrionette Driver design in my own project?
Its repository states no licence, so its author keeps all rights: ask Magma-Space before reusing the design.