Skip to the content
2 layersDistanceSensor, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
2
Nets
64
Pads
98
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
13 Aug 2025
Updated
20 Aug 2025

Overview

DistanceSensor is an open-source printed circuit board by Mactar1233, from the Mactar1233/limelight-kicad repository on GitHub. It is a 2-layer board with 2 parts on 64 nets.

It is built around the VL53L4CDV0DH/1. It belongs with the RP2350 boards of this library.

Main components

1

README

README.md

limelight-kicad

Parts

2
QtyValueFootprintReferences
1RP2350A-QFN60Importedfootprints:RP2350A_QFN-60_EP_7.75x7.75_Pitch0.4mmU1
1VL53L4CDV0DH/1Importedfootprints:LGA12_STMU2

More from Mactar1233/limelight-kicad

2
  • 4 layers121.7 × 32.5 mmPD Board Fused, the printed circuit board in 3D

    PD Board Fused

    Mactar1233/limelight-kicad

    28 parts
  • 4 layers97 × 32.5 mmPD Board, the printed circuit board in 3D

    PD Board

    Mactar1233/limelight-kicad

    19 parts

Similar boards

  • 2 layers110.7 × 67.8 mmCyberdeck, the printed circuit board in 3D

    Cyberdeck

    awesomebrownies/cyberdeck

    Deck Featuring: Controllers, shock cage, folding travel mode, and picatinny rails

    38 parts2
  • 4 layers154.2 × 30.1 mmRep trap pcb, the printed circuit board in 3D

    Rep trap pcb

    open-thngs/trap-a-rep-trigger

    Device to detect passing creatures to trigger an external device like a DSLR camera

    91 parts1
  • 2 layers24 × 24.5 mmPCB Design Lab, the printed circuit board in 3D

    PCB Design Lab

    liziying115-dev/PCB_Design_Lab

    13 parts
  • 2 layers17 × 14.5 mmLidar pcb, the printed circuit board in 3D

    Lidar pcb

    oddgrd/auge

    This repo contains the kicad PCB files, as well as libraries for footprints and symbols, for my [VL53L4CD][https://www.st.com/en/imaging-and-photonics-solutions/vl53l4cd.html] daughterboard.

    16 parts
  • 2 layers141 × 99.1 mmFace avant, the printed circuit board in 3D

    Face avant

    jmolas42/Cat-Feeder

    automatic cat feeder

    54 parts1
  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0

Questions

What parts does the DistanceSensor use?

2 parts, built around the VL53L4CDV0DH/1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DistanceSensor KiCad files?

From the Mactar1233/limelight-kicad repository on GitHub, at the commit this page was made from: the board is DistanceSensor/DistanceSensor.kicad_pcb and its schematic DistanceSensor/DistanceSensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DistanceSensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask Mactar1233 before reusing the design.