
Energy
MSMRo/Fluorimetro_lowcost
La PCB Energy se usa para la alimentación del montaje, con una línea de 5 V para el Arduino Mega y una línea de 12 V para la iluminación.

La PCB Energy se usa para la alimentación del montaje, con una línea de 5 V para el Arduino Mega y una línea de 12 V para la iluminación.
Shield arduino is an open-source printed circuit board by MSMRo, from the MSMRo/Fluorimetro_lowcost repository on GitHub. It is a 2-layer board of 53.8 × 98.7 mm with 21 parts on 103 nets, routed with 247 tracks and 0 vias.
It is built around the LM358. Its parts include 10 resistors, 4 connectors, 1 capacitor, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
La PCB Energy se usa para la alimentación del montaje, con una línea de 5 V para el Arduino Mega y una línea de 12 V para la iluminación. El esquema archivado contiene entrada por conector DC, fusible de 10 A, diodo Zener, convertidor MC00100, MOSFET DMP6023LE-13 y filtrado.
Untitled.kicad_sch y Untitled.kicad_pcb: fuente KiCad.Energia .step: modelo 3D exportado.Untitled-backups/: respaldos cronológicos de abril y mayo de 2026.flatcam_files/: primera preparación de fabricación.flatcam_files_v2/: segunda preparación.flatcam_vfinal/: ruta final conservada.cortadora_laser_v5_energy/: Gerber y perforaciones para el flujo de corte láser.Mide ambas salidas sin carga antes de conectar el Mega o los LED. Verifica polaridad, masa común, capacidad de corriente y temperatura de los componentes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R5, R6, R7, R8, R9, R10 |
| 2 | QWIIC_5v | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J4 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1K | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV1 |
| 1 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Arduino_Mega2560_R3_Shield | PCM_arduino-library:Arduino_Mega2560_R3_Shield | A1 |
| 1 | LCD NOKIA 5110 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LED ext | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |

MSMRo/Fluorimetro_lowcost
La PCB Energy se usa para la alimentación del montaje, con una línea de 5 V para el Arduino Mega y una línea de 12 V para la iluminación.

MSMRo/Fluorimetro_lowcost
La PCB Energy se usa para la alimentación del montaje, con una línea de 5 V para el Arduino Mega y una línea de 12 V para la iluminación.

MSMRo/Fluorimetro_lowcost
La PCB Energy se usa para la alimentación del montaje, con una línea de 5 V para el Arduino Mega y una línea de 12 V para la iluminación.

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance


tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen


starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

It measures 53.8 × 98.7 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MSMRo/Fluorimetro_lowcost repository on GitHub, at the commit this page was made from: the board is 1_Circuito/1_Transmisor/2_CIRCUITS/1_CARACTERIZACION_LED/shield_arduino/shield_arduino.kicad_pcb and its schematic 1_Circuito/1_Transmisor/1_TESTS/3_TEST_KICAD/shield_arduino/shield_arduino.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MSMRo before reusing the design.