4 layers186.9 × 129.8 mm
BLDC 4
ansh1113/e-bike-conversion-kit
A 4-layer PCB-based e-bike conversion kit featuring an STM32-based VESC ESC, power management circuits, wireless throttle, GSM, GPS, and more.
179 parts1
4 layers139.7 × 76.2 mm
Pev uvw sw
MIH-pi/uvw_switchA three-phase motor DPDT relay switch
- Size
- 139.7 × 76.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 66
- Pads
- 290
- Tracks, vias
- 461, 133
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 31 May 2022
- Updated
- 27 Jul 2022
Overview
Pev uvw sw is an open-source printed circuit board by MIH-pi, from the MIH-pi/uvw_switch repository on GitHub, published under the MIT licence. It is a 4-layer board of 139.7 × 76.2 mm with 86 parts on 66 nets, routed with 461 tracks and 133 vias.
It is built around the ATMEGA328P-AU, MC33063AD and CSTNE16M0V530000R0, with the MBR130LSFT1G-FS, MMBT2222A and NZT560A among its other parts. Its parts include 17 capacitors, 17 resistors, 9 connectors, 4 ICs and 4 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
8
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
MC33063AD
SOIC-8-40℃~+85℃@(TA) 1 1.5A 100kHz 3V~40V Adjustable Boost、Buck、Inverting Buck、Boost Built-in SOIC-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
CSTNE16M0V530000R0
SMD3213-3P-40℃~+85℃ 15pF 16MHz 40Ω SMD3213-3P Ceramic Resonators ROHSMurataCeramic Resonators
MBR130LSFT1G-FS
SOD-123-55℃~+125℃ 1A 200uA@30V 30V 380mV@1A 40A Independent SOD-123 Schottky Diodes ROHSFUXINSEMISchottky Diodes
MMBT2222A
SOT-23-55℃~+150℃ 1 NPN 100 100nA 1V 300MHz 300mW 40V 600mA 6V NPN Standalone SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
NZT560A
SOT-223-4-55℃~+150℃ 10uA 1W 3A 400mV 60V 75MHz NPN SOT-223-4 Bipolar (BJT) ROHSonsemiBipolar (BJT)
SRN6045TA-220M
SMD,6x6mm2.3A 22uH 3.3A 96mΩ ±20% SMD,6x6mm Power Inductors ROHSBournsPower Inductors
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mduvw_switch
A three-phase motor 3PDT relay switch
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6, C9, C10, C11, C12, C13, C14 |
| 5 | 1K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R12, R13, R14, R15 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C8, C18, C21 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3, JP4, JP5 | |
| 3 | 1432870-1 | MyFootprint:TE_Relay_VCF4-1000_PCB_Socket | K1, K2, K3 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R11 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C15, C16 |
| 2 | 240R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R10 |
| 2 | 33R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5 |
| 2 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-7343-43_Kemet-X | C20, C22 |
| 2 | 5V | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2, TP12 |
| 2 | GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP6, TP13 |
| 2 | RST | TestPoint:TestPoint_Pad_1.0x1.0mm | TP5, TP17 |
| 1 | 0R12 | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R16 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C | C17 |
| 1 | 1050170001 | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | 180R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R17 |
| 1 | 1K1 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R19 |
| 1 | 20K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R18 |
| 1 | 24V | TestPoint:TestPoint_Pad_1.0x1.0mm | TP18 |
| 1 | 300R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8 |
| 1 | 330pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C19 |
| 1 | 3K6 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R20 |
| 1 | 5V_EXT | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | ATmega328P-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U4 |
| 1 | AVRRST | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | CAN bus | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | CLK | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4 |
| 1 | CLV1L-FKB | LED_SMD:LED_Avago_PLCC4_3.2x2.8mm_CW | D3 |
| 1 | CSTNE16M0V530000R0 | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering | Y1 |
| 1 | CTRL | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J4 |
| 1 | CTRL | uvwswitch:motor_uvw_only_conn | J3 |
| 1 | DAT | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | DEBUG_RXD | TestPoint:TestPoint_Pad_1.0x1.0mm | TP11 |
| 1 | DEBUG_TXD | TestPoint:TestPoint_Pad_1.0x1.0mm | TP10 |
| 1 | Ferrite_Bead | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | M453_LQFP48 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | M4_DTR | TestPoint:TestPoint_Pad_1.0x1.0mm | TP9 |
| 1 | M4_RXD | TestPoint:TestPoint_Pad_1.0x1.0mm | TP8 |
| 1 | M4_TXD | TestPoint:TestPoint_Pad_1.0x1.0mm | TP7 |
| 1 | MBR130LSFT1G | Diode_SMD:D_SOD-123F | D5 |
| 1 | MC33063AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | MISO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP15 |
| 1 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MOSI | TestPoint:TestPoint_Pad_1.0x1.0mm | TP14 |
| 1 | MOTOR | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J6 |
| 1 | MOTOR | uvwswitch:motor_uvw_only_conn | J5 |
| 1 | NZT560A | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q2 |
| 1 | SCK | TestPoint:TestPoint_Pad_1.0x1.0mm | TP16 |
| 1 | SRN6045TA-220M | Inductor_SMD:L_Bourns_SRN6045TA | L2 |
| 1 | SS14 | Diode_SMD:D_SMA | D6 |
| 1 | SolderJumper | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP6 |
| 1 | TCAN1042V-Q1 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | VESC | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J8 |
| 1 | VESC | uvwswitch:motor_uvw_only_conn | J7 |
| 1 | X12M | Crystal:Crystal_HC49-U_Vertical | Y2 |
Similar boards
- 4 layers100 × 100 mm
Before router
ahdrage/leafy
DIY Wi-Fi climate-control prototype for Nissan Leaf: KiCad PCB, ESP32-C3 firmware, Blender enclosure and build notes. Inspired by OVMS.
66 parts - 4 layers72 × 55 mm
Exhaust mic
HasiKe/Exhaust-Mic
Motorcycle Exhaust and Intake Microphone for best soud on Videos.
135 parts - 4 layers60 × 45 mm
- 2 layers28 × 10 mm
- 2 layers
- 2 layers
- 2 layers70 × 20.1 mm
SPD DC MotorHBridge
Jarins/Solder-Paste-Dispenser-with-DCMotor
Motorized solder paste dispenser
48 parts29GPL-3.0
Questions
How big is the Pev uvw sw PCB?
It measures 139.7 × 76.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Pev uvw sw use?
86 parts, built around the ATMEGA328P-AU, MC33063AD, CSTNE16M0V530000R0 and MBR130LSFT1G-FS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pev uvw sw KiCad files?
From the MIH-pi/uvw_switch repository on GitHub, at the commit this page was made from: the board is kicad/pev_uvw_sw.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pev uvw sw design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).