2 layers67.5 × 82.5 mm
ARDUNIO ADV
MAATHES-THILAK-K/Arduino-SMD
Arduino SMD version with In-Built Bluetooth and Gesture sensor
62 parts2MIT
2 layers54.8 × 75.5 mm
OPENSOURCE REMAKE
MAATHES-THILAK-K/Arduino-SMD2Arduino SMD version with In-Built Bluetooth and Gesture sensor
- Size
- 54.8 × 75.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 101
- Pads
- 301
- Tracks, vias
- 965, 111
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Jun 2025
- Updated
- 31 Jan 2026
Overview
OPENSOURCE REMAKE is an open-source printed circuit board by MAATHES-THILAK-K, from the MAATHES-THILAK-K/Arduino-SMD repository on GitHub, published under the MIT licence. It is a 2-layer board of 54.8 × 75.5 mm with 78 parts on 101 nets, routed with 965 tracks and 111 vias.
It is built around the RP2040, W25Q32JVZPIQ and AMS1117-3.3, with the AMS1117-5.0, BSS138 and SK-3296S-01-L3 among its other parts. Its parts include 20 resistors, 17 capacitors, 10 connectors, 5 diodes and 4 ICs. It belongs with the RP2040 boards of this library.
Main components
8
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q32JVZPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 133MHz 2.7V~3.6V 20 Years 32Mbit 3ms SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbondNOR FLASH
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
SK-3296S-01-L3
SMD,7.8x2.8mm-40℃~+85℃ 1.35mm 10000 times 12V 2.75mm 50mA 7.8mm Black Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD,7.8x2.8mm Slide Switches ROHSXKB ConnectionSlide Switches
SM04B-SRSS-TB(LF)(SN)(P)
-UncategorisedJST
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdArduino-SMD
GrabCAD Link: https://grabcad.com/library/arduino-smd-1
This project is a compact, stylish, Arduino-compatible development board based on the ATmega328P-AU (TQFP). It includes several integrated peripherals making it ideal for wearable or IoT projects.
📦 Components
| Component | Description |
|---|---|
| ATmega328P-AU | 8-bit microcontroller (TQFP) |
| AMS1117-3.3V LDO | 5V to 3.3V regulator for APDS9960 & HC-05 |
| TLV76750 | 12V to 5V LDO |
| WS2812B | RGB LED (Smart addressable) |
| APDS-9960 | Gesture sensor (I2C) |
| HC-05 | Bluetooth module |
| Tactile Switch | User input |
| Active Buzzer | Sound feedback |
| USB-C (Power-only) | 5V input only (no data lines) |
| 12V Barrel Jack | Additional power input |
| ICSP Header (2x3) | For firmware flashing |
| GPIO Headers | Female headers for D0-D13, A0-A5 |
| Various SMD Resistors & Capacitors | For pull-ups, bypassing, filtering |
⚠️ Warning
The DRC (Design Rule Check) in KiCad was not fully resolved during initial layout. There may be trace width, clearance, or connectivity issues. Please verify the layout manually or run a complete DRC pass before fabrication.
📁 Folder Info
- Gerber/ → Ready-to-export Gerber files for fabrication
- KiCad_Project/ → All source files for the schematic & layout
- images/ → (Optional) Screenshots, 3D renders of the board
- LICENSE → MIT License for reuse
- .gitignore → Standard for KiCad projects
🛠️ To-Do
- Fix all DRC errors
- Add 3D renders
- Test hardware once fabricated
Parts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4, C6, C7, C8, C9, C10, C11, C15 |
| 8 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R11, R12, R13, R14, R20, R21, R22, R23 |
| 4 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q5, Q6 |
| 4 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP5, JP6 |
| 3 | 5.1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R33 |
| 3 | MountingHole_2.7mm_M2.5_ISO14580 | MountingHole:MountingHole_2.7mm_M2.5_ISO14580 | REF1**, REF2**, REF3** |
| 2 | 10uF | Capacitor_SMD:CP_Elec_4x5.4 | C16, C17 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R16 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5, C12 |
| 2 | 2.2K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15, R17 |
| 2 | 220 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R8 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5 |
| 2 | 27p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4, J6 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4, D5 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C13 |
| 1 | 22pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14 |
| 1 | 4*4*1/5 SMD tact SW | Button_Switch_SMD:SW_SPST_TL3342 | SW2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J9 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | Conn_01x10_Socket | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | D_Schottky | Diode_SMD:D_SOD-128 | D1 |
| 1 | D_TVS_Dual_AAC | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | Fuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP3 |
| 1 | LOGO | LOGO | G*** |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SK-3296S-01-L3 | switchess:SK3296S01L3 | S1 |
| 1 | SM04B-SRSS-TB_LF__SN_ | SPARKFUN-QWIIC:JST_SM04B-SRSS-TB_LF__SN_ | J2 |
| 1 | SW_DPDT_x2 | switchess:SW_CL-SB-22A-02T | SW3 |
| 1 | TACT SW | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | W25Q32JVZP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U5 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |
| 1 | \YSX321SL 12 Mhz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
The 76 most common of 78 parts.
More from MAATHES-THILAK-K/Arduino-SMD
1Similar boards
- 2 layers54.8 × 75.5 mm
Rp2040-basic m1
AtrivaTECH/picuno
A repo of all files for the pic uno RP2040+Arduino UNO derivative by ESCcrasci and AtrivaTECH
69 parts - 4 layers50 × 60 mm
- 4 layers35.7 × 35.7 mm
Opendocimeter v2
georges-mars/Docimeter
A wearable redesign of the OpenDosimeter platform focused on compact electronics, custom PCB integration, embedded firmware, and practical radiation-monitoring applications.
133 parts - 4 layers
- 4 layers68 × 75 mm
- 4 layers100 × 100 mm
- 2 layers290.3 × 95.7 mm
- 4 layers100 × 42 mm
Questions
How big is the OPENSOURCE REMAKE PCB?
It measures 54.8 × 75.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OPENSOURCE REMAKE use?
78 parts, built around the RP2040, W25Q32JVZPIQ, AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OPENSOURCE REMAKE KiCad files?
From the MAATHES-THILAK-K/Arduino-SMD repository on GitHub, at the commit this page was made from: the board is OPENSOURCE_REMAKE/v3.kicad_pcb and its schematic ARDUNIO_ADV.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OPENSOURCE REMAKE design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).