2 layers
SENS PCB
M-JEFFRYES/JS_UDS_PCB
This repository store the files required order the PCBs. Please use the latest versions.
2 parts
2 layers100 × 100 mm
UDSWB MAINBOARD
M-JEFFRYES/JS_UDS_PCBThis repository store the files required order the PCBs. Please use the latest versions.
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 64
- Pads
- 124
- Tracks, vias
- 178, 8
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 6 Oct 2023
- Updated
- 14 Nov 2023
Overview
UDSWB MAINBOARD is an open-source printed circuit board by M-JEFFRYES, from the M-JEFFRYES/JS_UDS_PCB repository on GitHub. It is a 2-layer board of 100 × 100 mm with 29 parts on 64 nets, routed with 178 tracks and 8 vias.
It is built around the TIP120. Its parts include 13 connectors, 7 resistors, 1 diode and 1 transistor. It belongs with the computers and single-board computers boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdJS_UDS_PCB
This repository store the files required order the PCBs. Please use the latest versions.
Visit the documentation repo for the latest guide latest urodynamics without borders guide.
Visit the urodynamics without borders website for full project details.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R2, R3, R4, R5, R6, R7 |
| 4 | MountingHole | MountingHole:MountingHole_3.7mm | H1, H2, H3, H4 |
| 2 | HX711_OUT_UF | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3, J5 |
| 2 | HX711_OUT_VI | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J6 |
| 1 | 3.3vDC Buck Conv | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | 5vDC Buck Conv | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J7 |
| 1 | DIODE | Diode_THT:D_5W_P10.16mm_Horizontal | D1 |
| 1 | LOADCELL_OUT_UF | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | LOADCELL_OUT_VI | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | PABD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J12 |
| 1 | PBLAD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | Pump Connection | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | PUMP |
| 1 | Pump Switch | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Pump Switch |
| 1 | R_Small | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1 |
| 1 | TCA9548A Left | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J13 |
| 1 | TCA9548A Right | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J14 |
| 1 | TIP120 | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
More from M-JEFFRYES/JS_UDS_PCB
1Similar boards
- 2 layers364.4 × 167.3 mm
- 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers489.6 × 170.7 mm
Mission control
dcpedit/mission-control
Modern replacement PCB for the IBM Model M 122
286 parts31CC-BY-4.0 - 2 layers168 × 123 mm
V2 - 2
RudgeLab/FluoPi
Code and teaching materials for UC/BackyardBrains raspberry pi "macro" scope.
131 parts26 - 2 layers
Catozap
jones139/catocam
Uses a custom trained YoloV8 model on a Raspberry Pi to Detect Cats in CCTV images and Unleash a Cat Deterrent
3 parts18GPL-3.0 - 2 layers32.5 × 21.2 mm
Taptap
dcpedit/taptap
TapTap is a solenoid breakout board for those who are interested in adding a solenoid to their existing project. All you need are the following components, and an extra data pin on your microcontroller.
9 parts13CC-BY-4.0 - 2 layers323.8 × 169.8 mm
- 2 layers57.1 × 102.9 mm
Synthwave
alexose/synthwave
An open-source experiment in carbon removal based on the electrochemical pH swing of seawater.
70 parts10CERN-OHL-P-2.0
Questions
How big is the UDSWB MAINBOARD PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UDSWB MAINBOARD use?
29 parts, built around the TIP120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UDSWB MAINBOARD KiCad files?
From the M-JEFFRYES/JS_UDS_PCB repository on GitHub, at the commit this page was made from: the board is src/UDSWB_MAINBOARD/UDSWB_MAINBOARD.kicad_pcb and its schematic Latest/UDSWB_MAINBOARD/UDSWB_MAINBOARD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UDSWB MAINBOARD design in my own project?
Its repository states no licence, so its author keeps all rights: ask M-JEFFRYES before reusing the design.