Skip to the content
2 layers18.5 × 21 mmXIAO LiFePO4-Power Module, the printed circuit board in 3D

XIAO LiFePO4-Power Module

M-C-machts/XIAO-LiFePO4-Power-Module

LiFePO4 charging + 3.3V power module in Seeed Studio XIAO form factor, with battery voltage sense

Size
18.5 × 21 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
17
Pads
118
Tracks, vias
274, 51
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
21 Feb 2026
Updated
21 Feb 2026

Overview

XIAO LiFePO4-Power Module is an open-source printed circuit board by M-C-machts, from the M-C-machts/XIAO-LiFePO4-Power-Module repository on GitHub. It is a 2-layer board of 18.5 × 21 mm with 23 parts on 17 nets, routed with 274 tracks and 51 vias.

It is built around the RT6150B-33GQW, TP5000-QFN16 and AO3415. Its parts include 7 capacitors, 5 resistors, 3 ICs, 3 connectors and 2 inductors.

Main components

3

README

README.md

XIAO LiFePO4 Module (Charging + 3.3V Regulator)

Small power-management PCB for running an ESP32 (or other 3.3V devices) from a single LiFePO4 cell.

This board provides:

  • LiFePO4 charging from ~5V input
  • Proper handling of charge + discharge
  • A stable 3.3V output
  • Battery voltage sense output via a resistor divider (for ADC monitoring)

Form factor / compatibility

This module matches the Seeed Studio XIAO form factor (approx. 21 x 17.5 mm) and is intended to be:

  • soldered directly onto a Seeed Studio XIAO ESP32C3 (castellated-module style), or
  • used as a small daughter board on a larger PCB.

Connections

  • Battery: JST SH connector (LiFePO4 cell)
  • Charge input: ~5V
  • Output: regulated 3.3V
  • VBAT_SENSE: divided battery-voltage output (connect to an ADC pin)

Pin names / exact pinout depends on the PCB revision. See the schematic/PCB files in this repo.

Typical use cases

  • Battery-powered ESP32 sensor nodes
  • Small portable projects using XIAO-sized MCUs
  • Projects needing safe LiFePO4 charging + regulated 3.3V

Notes / safety

  • Use only single-cell LiFePO4 batteries.
  • Verify polarity before connecting the battery.
  • Charging from ~5V assumes a suitable 5V source (USB, regulated supply, etc.).

Repo contents

  • KiCad project files (schematic + PCB)
  • Manufacturing outputs - todo
  • BOM / assembly notes - todo

License

todo

Parts

23
QtyValueFootprintReferences
4RResistor_SMD:R_0603_1608MetricR2, R3, R4, R5
310uFCapacitor_SMD:C_0805_2012MetricC1, C2, C3
21uFCapacitor_SMD:C_0603_1608MetricC4, C7
247uCapacitor_SMD:C_0805_2012MetricC5, C6
1100mResistor_SMD:R_1206_3216MetricR1
12,2uHMarcus_Passives:INDC3225X120NL2
14,7uHMarcus_Passives:INDC3225X120NL1
1AO3415Marcus_ICs:SOT-23-3_MarcusQ1
1APX810S-31SA-7Marcus_ICs:SOT-23-3_MarcusIC2
1Conn_Castellation_1x2_no_GNDMarcus_Connectors:Conn_Castellated_1x2_no_GNDJ7
1Conn_Castellation_1x3Marcus_Connectors:Conn_Castellated_1x3_GND_movedJ2
1Conn_JST-XH_1x2Marcus_Connectors:Conn_JST-XH_1x2J1
1PMEG10020ELXEXMarcus_Discretes:PMEG4010EXEXD1
1RT6150B-33GQWMarcus_ICs:SON50P250X250X80-11N-DIC1
1SwitchMarcus_Connectors:Conn_Mechc.-solder-pad_1x2SW1
1TP5000-QFN16Marcus_ICs:TP5000-QFN16U1

Similar boards

  • 2 layers94 × 72 mmHome sense meteostation, the printed circuit board in 3D

    Home sense meteostation

    trabem/home_sense_meteostation

    Репозиторій автономної battery-powered метеостанції на ESP32-C3-WROOM-02. Містить firmware (ESP-IDF / FreeRTOS), KiCad-проєкти двох плат і матеріали фінальної презентації.

    93 parts
  • 2 layers98 × 56 mmThermal pcb, the printed circuit board in 3D

    Thermal pcb

    Badbird5907/thermal-camera

    My design of a cheap and affordable thermal camera

    68 parts59MIT
  • 2 layers182.6 × 130.9 mmBlackmacro base, the printed circuit board in 3D

    Blackmacro base

    KipJM/blackmacro-hardware

    An open source, smaller, more configurable, and more capabable video editing keyboard based on the raspberry Pi Pico 2W.

    189 parts29CERN-OHL-W-2.0
  • 2 layers44 × 35 mmAmmeter rev-05, the printed circuit board in 3D

    Ammeter rev-05

    JonHylands/fxos-battery-harness

    Repository for Battery Harness & Ammeter source/design files (CAD, PCB, etc)

    54 parts5MPL-2.0
  • 2 layers131.5 × 83.5 mmBadge esp32-s3, the printed circuit board in 3D

    Badge esp32-s3

    BYU-I-eBadge/e-badge

    A hackable eBadge platform for students — a customizable, programmable electronics badge designed for hands-on learning and creative exploration throughout their academic journey.

    218 parts2MIT
  • 2 layers61.7 × 35.1 mmMS88SF2 eInk display v2, the printed circuit board in 3D

    MS88SF2 eInk display v2

    chacal/pcbs

    Hardware design files for various hobby projects

    61 parts1MIT
  • 2 layers19 × 19 mmPBSEQ D2, the printed circuit board in 3D

    PBSEQ D2

    CIRCUITSTATE/PBSEQ-D2

    A simple push-button controlled power sequencer circuit demo board.

    22 parts1

Questions

How big is the XIAO LiFePO4-Power Module PCB?

It measures 18.5 × 21 mm and has 2 copper layers, 1.6 mm thick.

What parts does the XIAO LiFePO4-Power Module use?

23 parts, built around the RT6150B-33GQW, TP5000-QFN16 and AO3415. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the XIAO LiFePO4-Power Module KiCad files?

From the M-C-machts/XIAO-LiFePO4-Power-Module repository on GitHub, at the commit this page was made from: the board is hardware/XIAO-LiFePO4-Power-Module.kicad_pcb and its schematic hardware/XIAO-LiFePO4-Power-Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the XIAO LiFePO4-Power Module design in my own project?

Its repository states no licence, so its author keeps all rights: ask M-C-machts before reusing the design.