
Flight computer
Terrapin-Rocket-Team/SRAD-Avionics
Code and PCBs for the avionics subteam for the SRAD flight computer and side projects

PCB for a MeltyBrain Battle Bot
Meltybrain is an open-source printed circuit board by LunaWithARose, from the LunaWithARose/meltybrain-kicad repository on GitHub. It is a 4-layer board of 33.9 × 33 mm with 48 parts on 66 nets, routed with 273 tracks and 94 vias.
It is built around the ESP32-S3-MINI-1-N8, TS30011-M033QFNR and H3LIS331DL, with the CDSOD323-T05S-Q and MBR230LSFT1G among its other parts. Its parts include 13 resistors, 12 capacitors, 5 diodes, 5 connectors and 4 ICs. It belongs with the ESP32 boards of this library.
This project involves the design and development of a custom PCB for a Melty Brain combat robot.
A Melty Brain robot uses rotational motion to achieve directional movement and control. Unlike conventional robots, which rely on a fixed forward-facing orientation, a Melty Brain robot must account for its continuously changing orientation while spinning.
The goal of this project is to develop a compact electronics platform tailored to the requirements of a Melty Brain robot.
The PCB is designed around a 34 × 34 mm form factor, with an emphasis on compact component placement, electrical reliability, and integration into the robot.
The board layout is being developed with consideration for component placement, routing, board dimensions, and electrical requirements.
Top-side PCB layout showing component placement and routing.
Back-side PCB layout showing component placement and routing.
Three-dimensional rendering of the PCB.
MeltyBrain-PCB/
│
├── README.md
│
├── images/
│ ├── melty-front.png
│ ├── melty-back.png
│ ├── melty-3d-front.png
│ └── melty-3d-back.png
│
├── hardware/
├── schematics
└── pcbsDirectory structure is a suggested organization; adjust it to match the actual repository contents.
Several considerations are important throughout the design process:
Progress checklist reflects the current development stage and will be updated as the project advances.
Future development will focus on preparing manufacturing files and validating the assembled board.
Designed and developed by Luna Waller.
Electrical Engineering Student | Washington State University
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C14, C15, C18, C19 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R15 |
| 4 | Conn_01x02_Pin | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J1, J2, J3, J4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R3, R5 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C13, C20, C21 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric | C1, C16, C17 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric | R11, R16 |
| 2 | 33 | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 2 | CDSOD323-T05S-Q | Diode_SMD:D_SOD-323 | D7, D8 |
| 2 | H3LIS331DL | H3LIS331DL:TFLGA16_3X3X1_STM | U4, U5 |
| 2 | SW_Push | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | SW1, SW2 |
| 1 | 4.7uH | Inductor_SMD:L_1206_3216Metric | L2 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_GH_BM03B-GHS-TBT_1x03-1MP_P1.25mm_Vertical | J5 |
| 1 | ESP32-S3-MINI-1 | RF_Module:ESP32-S2-MINI-1 | U1 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | MBR230LSFT1G | Diode_SMD:D_SOD-123F | D2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | TS30011-M033QFNR | TS30011:QFN50P300X300X100-17N-D | IC2 |
The 45 most common of 48 parts.

Terrapin-Rocket-Team/SRAD-Avionics
Code and PCBs for the avionics subteam for the SRAD flight computer and side projects

nasheed-x/aether
Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.

AlfredoSystems/Rotini-Hardware
📖 Documentation: https://www.alfredosys.com/Rotini-Hardware/ (pinout, power limits, flashing ExpressLRS, first Arduino upload)

PTR-projects/PTR_mega_hardware
Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.

devtank-ltd/kicad_hiltop_board_template
HILTOP Reference design template for new plug-in test modules/cards



PTR-projects/PTR_mini_hardware
Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.
It measures 33.9 × 33 mm and has 4 copper layers, 1.54 mm thick.
48 parts, built around the ESP32-S3-MINI-1-N8, TS30011-M033QFNR, H3LIS331DL and CDSOD323-T05S-Q. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LunaWithARose/meltybrain-kicad repository on GitHub, at the commit this page was made from: the board is hardware/meltybrain.kicad_pcb and its schematic hardware/gyro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LunaWithARose before reusing the design.