

PIC16F887 RTC
Prototype
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 70
- Pads
- 173
- Tracks, vias
- 502, 33
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 25 Aug 2017
- Updated
- 17 Sep 2017
Overview
PIC16F887 RTC is an open-source printed circuit board by LuanTechAutomation, from the LuanTechAutomation/PIC16F887_Clock_V1 repository on GitHub. It is a 2-layer board with 49 parts on 70 nets, routed with 502 tracks and 33 vias.
It is built around the DS1307Z+, ULN2803A and 2SA1013. Its parts include 22 resistors, 5 capacitors, 5 ICs, 4 transistors and 3 switches. It belongs with the PIC boards of this library.
Main components
3DS1307Z+
SO-80℃~+70℃ 10nA 300nA 4.5V~5.5V Backup power management and battery charging、InsideSRAM/NVRAM、Programmable clock output External I2C SO-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor Arrays2SA1013
SOT-89Bipolar (BJT)hongjiacheng
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100 | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R3, R4, R5, R6, R7, R8, R11, R12, R20 |
| 5 | 10k | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R9, R17, R19, R27, R28 |
| 4 | 2SA1013 | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q1, Q2, Q3, Q4 |
| 4 | 330 | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R13, R14, R15, R16 |
| 3 | SW_Push | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | SW1, SW2, SW6 |
| 2 | 22p | Capacitors_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C4, C5 |
| 2 | R | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1, R2 |
| 1 | 100R | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R10 |
| 1 | 100nF | Capacitors_THT:C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal | C3 |
| 1 | 104 | Capacitors_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 10uF | Capacitors_THT:CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 16MHz | free Elec:CRYSTAL_HC49_PTH | Y2 |
| 1 | 32.768kHz | Crystals:Crystal_C26-LF_d2.1mm_l6.5mm_Horizontal | Y1 |
| 1 | 4LED7 | KiCAD_pml:4LED7 | U3 |
| 1 | BARREL_JACK | free Elec:POWER_JACK_PTH | J1 |
| 1 | Buzzer | Buzzers_Beepers:MagneticBuzzer_ProSignal_ABI-009-RC | LS1 |
| 1 | CMOS | KiCAD_pml:CMOS CR2032 | U9 |
| 1 | DS1307 | Housings_DIP:DIP-8_W7.62mm | IC2 |
| 1 | ICD | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J2 |
| 1 | LDR03 | Opto-Devices:Resistor_LDR_10x8.5_RM7.6 | R18 |
| 1 | PIC16F8874-PDIP | Housings_DIP:DIP-40_W15.24mm | U2 |
| 1 | Thermistor_NTC | Capacitors_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | TH1 |
| 1 | ULN2803A | Housings_DIP:DIP-18_W7.62mm | U1 |
The 45 most common of 49 parts.
Similar boards
- 4 layers243.8 × 171.5 mm

- 6 layers243.8 × 243.8 mm

Raven
agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack
331 parts87 - 2 layers178 × 145 mm

Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70 - 2 layers100 × 100 mm

Mist1010
UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure
273 parts43MIT - 4 layers239.4 × 165.7 mm

- 2 layers101.6 × 147.3 mm

Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT - 6 layers99.5 × 100 mm

Zynq test
cropinghigh/zynq_a9_mb
Zynq 7z010 dev/main board based on components from Antminer S9 control board
528 parts17 - 2 layers191.8 × 48.4 mm

Questions
What parts does the PIC16F887 RTC use?
49 parts, built around the DS1307Z+, ULN2803A and 2SA1013. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIC16F887 RTC KiCad files?
From the LuanTechAutomation/PIC16F887_Clock_V1 repository on GitHub, at the commit this page was made from: the board is KiCAD_PIC16F887_RTC/PIC16F887_RTC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIC16F887 RTC design in my own project?
Its repository states no licence, so its author keeps all rights: ask LuanTechAutomation before reusing the design.