Skip to the content
2 layers100 × 100 mmHigh current LED switch with ballast, the printed circuit board in 3D

High current LED switch with ballast

Llamero/Optokintetic_Relflex_Rig1

The development of this scope and illuminator was funded by the following grant: NIH P30EY003176

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
17
Pads
95
Tracks, vias
24, 236
Pours
16
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
3 Mar 2024
Updated
6 Feb 2025

Overview

High current LED switch with ballast is an open-source printed circuit board by Llamero, from the Llamero/Optokintetic_Relflex_Rig repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 100 mm with 40 parts on 17 nets, routed with 24 tracks and 236 vias.

Its parts include 13 resistors, 11 connectors, 4 capacitors, 3 diodes and 3 transistors.

README

README.md

Optokinetic Reflex Behavior Rig

This is an open-source behavior rig designed to accurately the optokinetic reflex in mice. This design is a derivative of the following designs:

The development of this scope and illuminator was funded by the following grant: NIH P30EY003176

How to use the CAD files

The CAD files can be opened using FreeCAD: https://www.freecadweb.org/downloads.php Unless otherwise specified, all the part numbers listed in the CAD file are Thorlabs part numbers.

Controlling the LEDs

The green (l-cone) and UV (s-cone) 27 amp LEDs are directly controlled via the RGB LED control channels on the EKB DLP. These 3v3 outputs are shifted to 12V with a gate driver, which is then used to switch mosfets in series with the LEDs. Ballast resistors control the current.

All circuit design files can be found in the KiCAD filder, and opened using KiCAD: https://www.kicad.org/download/

Parts

40
QtyValueFootprintReferences
10Conn_01x01_PinCustom footprints:KEYSTONE_4928J1, J2, J3, J4, J6, J7, J8, J9, J10, J11
7RCustom footprints:R_2818R4, R6, R8, R10, R11, R12, R13
49.1mFCustom footprints:CAP_FKS_K21_PANC1, C2, C3, C4
4HeatsinkCustom footprints:31mm heatsinkHS1, HS2, HS3, HS4
325mCustom footprints:R_2818R3, R7, R9
3D_TVSCustom footprints:DO-214ABD1, D2, D3
3Q_NMOS_GDSPackage_TO_SOT_SMD:TO-263-2Q1, Q2, Q3
20Custom footprints:R_2818R2, R5
11000Resistor_SMD:R_1206_3216MetricR1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1RightJ5

The 38 most common of 40 parts.

Similar boards

  • 2 layers139.7 × 73.7 mm134pin 7-967288-1, the printed circuit board in 3D

    134pin 7-967288-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    40 parts1.2k
  • 2 layers149.4 × 177.4 mmLightsculpture, the printed circuit board in 3D

    Lightsculpture

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    40 parts915
  • 2 layers150 × 50 mmEleLab v2 Bus150, the printed circuit board in 3D

    EleLab v2 Bus150

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    40 parts531GPL-3.0
  • 2 layers66.4 × 48.1 mmRaspberry, the printed circuit board in 3D

    Raspberry

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    40 parts456
  • 2 layers44 × 44 mmTrackball, the printed circuit board in 3D

    Trackball

    jfedor2/rp2040-pmw3360

    RP2040+PMW3360 PCB and code

    40 parts432
  • 2 layers90.8 × 53.3 mmABSIS Bus Master, the printed circuit board in 3D

    ABSIS Bus Master

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    40 parts431
  • 2 layers59.6 × 109.5 mmDrop, the printed circuit board in 3D

    Drop

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    40 parts410
  • 2 layers123.8 × 73.5 mmAttic, the printed circuit board in 3D

    Attic

    simondlevy/Hackflight

    Minimalist flight-control toolkit for makers

    40 parts334GPL-3.0

Questions

How big is the High current LED switch with ballast PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the High current LED switch with ballast use?

40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the High current LED switch with ballast KiCad files?

From the Llamero/Optokintetic_Relflex_Rig repository on GitHub, at the commit this page was made from: the board is CAD models/High current LED switch with ballast/High current LED switch with ballast.kicad_pcb and its schematic CAD models/High current LED switch with ballast/High current LED switch with ballast.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the High current LED switch with ballast design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).