
Li Po Charger
valeronm/Li-Po-Charger
Schematic and PCB for Li-Po charger with power path, power management inputs, charging state and 3.3V output and I2C fuel gauge

Motherboard
ELE MB A1 is an open-source printed circuit board by Les-opossums, from the Les-opossums/ELE_MB_A1 repository on GitHub. It is a 4-layer board of 80 × 56 mm with 142 parts on 154 nets, routed with 629 tracks and 125 vias.
It is built around the SN65HVD230D, SN74LVC1T45DBV and TPS54302, with the SL1050-100M, B5818WS and SI2301CDS-T1-GE3 among its other parts. Its parts include 57 resistors, 24 capacitors, 21 connectors, 10 diodes and 6 ICs. It belongs with the computers and single-board computers boards and the ESP32 and RISC-V boards of this library.
Electronic board - Motherboard - Main robot - A1

| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 10kΩ | PCM_JLCPCB:R_0402 | R109, R110, R114, R118, R120, R126, R128, R134, R137, R138, R140, R141, R143, R146, R147, R149 +4 |
| 15 | 100Ω | PCM_JLCPCB:R_0402 | R105, R106, R115, R121, R122, R123, R129, R130, R131, R135, R136, R139, R144, R145, R148 |
| 11 | 100nF | PCM_JLCPCB:C_0402 | C103, C114, C115, C116, C117, C118, C119, C120, C121, C123, C124 |
| 9 | Red | PCM_JLCPCB:D_0603 | D101, D102, D103, D104, D106, D107, D108, D109, D110 |
| 8 | 1kΩ | PCM_JLCPCB:R_0402 | R101, R102, R119, R127, R154, R155, R156, R157 |
| 8 | Conn_01x03 | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J108, J110, J113, J115, J117, J118, J120, J121 |
| 7 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J107, J109, J111, J112, J114, J116, J119 |
| 6 | 100kΩ | PCM_JLCPCB:R_0402 | R103, R104, R113, R116, R124, R132 |
| 5 | 22uF | PCM_JLCPCB:C_1206 | C109, C110, C112, C113, C122 |
| 5 | 2N7002 | PCM_JLCPCB:Q_SOT-23 | Q101, Q103, Q104, Q105, Q106 |
| 5 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J102, J103, J104, J105, J106 |
| 5 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP101, JP103, JP104, JP105, JP106 |
| 4 | 100nF | PCM_JLCPCB:C_0603 | C101, C102, C105, C107 |
| 4 | 330Ω | PCM_JLCPCB:R_0402 | R117, R125, R133, R142 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H101, H102, H103, H104 |
| 4 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP102, TP103, TP104, TP105 |
| 2 | 10uF | PCM_JLCPCB:C_1206 | C104, C106 |
| 2 | 120Ω | PCM_JLCPCB:R_1206 | R107, R108 |
| 2 | 3.3kΩ | PCM_JLCPCB:R_0402 | R111, R112 |
| 2 | 47pF | PCM_JLCPCB:C_0402 | C108, C111 |
| 2 | SL1050-100M | Inductor_SMD:L_APV_APH1050 | L101, L102 |
| 2 | SN74LVC1T45DBV | Package_TO_SOT_SMD:SOT-23-6 | U104, U105 |
| 2 | TPS54302 | Package_TO_SOT_SMD:SOT-23-6 | U101, U102 |
| 1 | B5818WS | PCM_JLCPCB:D_SOD-323 | D105 |
| 1 | Conn_01x02 | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J101 |
| 1 | LOGO | LOGO | G*** |
| 1 | SI2301CDS-T1-GE3 | PCM_JLCPCB:Q_SOT-23 | Q102 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U103 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP101 |
| 1 | XIAO-ESP32-C3-DIP | XIAO_Series_Footprints:XIAO-ESP32-C3-DIP | U106 |
| 1 | ~ | Z7-lite:Z7-lite | JP102 |

valeronm/Li-Po-Charger
Schematic and PCB for Li-Po charger with power path, power management inputs, charging state and 3.3V output and I2C fuel gauge



jfulreader64/Baja_ECVT_Controller
ECVT Controller for brushed motor, 15a Sustained Current



desanv01/Flight-Controller-V2
STM32H743 controller: regulated power, signal-only ESC, neutral ArduPilot firmware, manufacturing data and engineering history.

outlandnish/subaru-brz-hv-ecu
HV Power Management ECU for my Subaru BRZ EV Conversion
It measures 80 × 56 mm and has 4 copper layers, 1.6 mm thick.
142 parts, built around the SN65HVD230D, SN74LVC1T45DBV, TPS54302 and SL1050-100M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Les-opossums/ELE_MB_A1 repository on GitHub, at the commit this page was made from: the board is ELE_MB_A1.kicad_pcb and its schematic ELE_MB_A1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Les-opossums before reusing the design.