

SkyGuard Cutdown Pro high altitude balloon flight termination device
- Size
- 50.8 × 114.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 88
- Nets
- 90
- Pads
- 398
- Tracks, vias
- 779, 163
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 31 Jan 2024
- Updated
- 17 Dec 2025
Overview
Cutdown is an open-source printed circuit board by LeemanGeophysicalLLC, from the LeemanGeophysicalLLC/SkyGuard_Cutdown_Pro_Electronics repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.8 × 114.3 mm with 88 parts on 90 nets, routed with 779 tracks and 163 vias.
Its parts include 30 resistors, 19 capacitors, 10 connectors, 7 ICs and 7 diodes.
README
README.mdSkyGuard_Cutdown_Pro
SkyGuard Cutdown Pro high altitude balloon flight termination device
Parts
88| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1-0000007 | capacitors_0603:1-0000007 | C4, C5, C7, C8, C9, C10, C12, C14 |
| 6 | 1-0000010 | resistors_0603:1-0000010 | R8, R9, R16, R17, R18, R22 |
| 6 | 1-0000013 | resistors_0603:1-0000013 | R12, R13, R23, R24, R25, R26 |
| 4 | 1-0000006 | resistors_0603:1-0000006 | R6, R14, R15, R19 |
| 4 | Imperial4 | mechanical:MountingHole_imperial4 | H1, H2, H3, H4 |
| 3 | 1-0000075 | capacitors_0805:1-0000075 | C16, C17, C19 |
| 3 | 1-0000174 | resistors_0603:1-0000174 | R27, R28, R30 |
| 3 | 1-0000679 | resistors_0603:1-0000679 | R2, R3, R7 |
| 3 | 1-0001468 | diodes:1-0001468 | D4, D5, D6 |
| 2 | 1-0000008 | resistors_0603:1-0000008 | R10, R11 |
| 2 | 1-0000012 | resistors_0603:1-0000012 | R4, R5 |
| 2 | 1-0000017 | capacitors_0603:1-0000017 | C2, C3 |
| 2 | 1-0000018 | capacitors_0603:1-0000018 | C6, C11 |
| 2 | 1-0000027 | resistors_0603:1-0000027 | R20, R21 |
| 2 | 1-0000340 | mosfets:1-0000340 | Q2, Q3 |
| 2 | 1-0000526 | connectors:1-0000526 | J4, J5 |
| 2 | Fiducial_1mm_2mm | mechanical:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | NP_Conn_01x02_Relief | np_connectors:SolderWire_1x02_LargeHole | J9, J10 |
| 1 | 1-0000009 | resistors_0603:1-0000009 | R1 |
| 1 | 1-0000015 | capacitors_0603:1-0000015 | C13 |
| 1 | 1-0000016 | capacitors_0805:1-0000016 | C1 |
| 1 | 1-0000190 | connectors:1-0000190 | J8 |
| 1 | 1-0000246 | batteries:1-0000246 | BT1 |
| 1 | 1-0000399 | leds_other:1-0000399 | D1 |
| 1 | 1-0000446 | others:1-0000446 | U4 |
| 1 | 1-0000505 | mosfets:1-0000505 | Q4 |
| 1 | 1-0000600 | leds_0805:1-0000600 | D3 |
| 1 | 1-0000601 | leds_0805:1-0000601 | D2 |
| 1 | 1-0000658 | regulators:1-0000658 | U7 |
| 1 | 1-0000680 | switches:1-0000680 | SW1 |
| 1 | 1-0000738 | capacitors_0603:1-0000738 | C18 |
| 1 | 1-0000779 | level_shifting:1-0000779 | U3 |
| 1 | 1-0000790 | connectors:1-0000790 | J7 |
| 1 | 1-0001205 | connectors:1-0001205 | J2 |
| 1 | 1-0001466 | diodes:1-0001466 | D7 |
| 1 | 1-0001469 | capacitors_th:1-0001469 | C15 |
| 1 | 1-0001470 | resistors_2515:1-0001470 | R29 |
| 1 | 1-0001471 | sensors:1-0001471 | U2 |
| 1 | 1-0001505 | isolators:1-0001505 | U1 |
| 1 | 1-0001506 | connectors:1-0001506 | J1 |
| 1 | 1-0001649 | dc_dc_converters:1-0001649 | U6 |
| 1 | 1-0001703 | microcontrollers:1-0001703 | U5 |
| 1 | 1-0001787 | transistors:1-0001787 | Q1 |
| 1 | 1-0001788 | connectors:1-0001788 | J6 |
| 1 | LOGO | pcb_graphics:PCB Logo Standard | G*** |
| 1 | NP_Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | QWIIC | pcb_graphics:5mm qwiic logo | G*** |
| 1 | barepcb | misc:barepcb | PCB1 |
Similar boards
- 2 layers142.5 × 106.3 mm

- 2 layers43.8 × 60.3 mm

Smallreplacement
c0pperdragon/C64-Video-Enhancement
Component video modification for the C64 8-bit computer
88 parts286MIT - 2 layers95.3 × 95.3 mm

- 2 layers69.9 × 108 mm

- 2 layers127 × 36.2 mm

- 2 layers44.6 × 53.7 mm

- 2 layers43 × 43 mm

TurboCAN
henrikssn/TurboCAN
This is the official repository for the TurboCAN controller board, designed specifically for the Voron AfterBurner toolhead but can also be used on similar toolheads using NEMA17 steppers.
88 parts82 - 2 layers251.3 × 103.7 mm

Questions
How big is the Cutdown PCB?
It measures 50.8 × 114.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cutdown use?
88 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cutdown KiCad files?
From the LeemanGeophysicalLLC/SkyGuard_Cutdown_Pro_Electronics repository on GitHub, at the commit this page was made from: the board is KiCAD_Project/Cutdown.kicad_pcb and its schematic KiCAD_Project/Cutdown.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cutdown design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).