Skip to the content
2 layers140 × 50 mmRF Transmitter, the printed circuit board in 3D

This repository contains the design and simulation files for a 100 MHz FM transmitter, including the transmitter circuit, PCB design, manufacturing files, and a dedicated 100 MHz antenna design.

Size
140 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
23
Pads
127
Tracks, vias
322, 14
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Aug 2026
Updated
19 Aug 2026

Overview

RF Transmitter is an open-source printed circuit board by Lasthope027, from the Lasthope027/Radio-station repository on GitHub, published under the MIT licence. It is a 2-layer board of 140 × 50 mm with 61 parts on 23 nets, routed with 322 tracks and 14 vias.

It is built around the BF494, 2SC1971 and BB910. Its parts include 25 capacitors, 14 resistors, 9 inductors, 4 transistors and 2 connectors. It belongs with the radio and wireless boards of this library.

Main components

3

README

README.md

100 MHz FM Transmitter

Overview

This repository contains the design and simulation files for a 100 MHz FM transmitter, including the transmitter circuit, PCB design, manufacturing files, and a dedicated 100 MHz antenna design.

The project covers the workflow from circuit simulation and PCB design to antenna modeling.

For detailed technical specifications, design methodology, calculations, and simulation results, refer to the FM Radio Transmitter.pdf included in this repository.


Repository Structure

The repository is organized into the following sections:

  • Antenna/ — Contains the 100 MHz antenna model.
  • Transmitter/ — Contains the LTspice transmitter circuit and KiCad PCB design files.
  • FM Radio Transmitter.pdf — Contains the detailed technical documentation and simulation results.
  • README.md — Provides an overview and guide to the repository.

Antenna

The Antenna/ folder contains the antenna model designed specifically for operation at 100 MHz.

File

FM Antenna.maa

The .maa file can be opened using MMANA-GAL to inspect and simulate the antenna design.

Software: MMANA-GAL


Transmitter

The Transmitter/ folder contains the transmitter circuit and PCB design files.

LTspice Circuit

The Circuit .asc file contains the transmitter schematic and can be opened using LTspice to inspect the circuit and reproduce the simulation.

Software: LTspice

KiCad Files

The KiCad/ folder contains the schematic, PCB layout, and manufacturing files.

  • RF Transmitter.kicad_sch — KiCad schematic
  • RF Transmitter.kicad_pcb — PCB layout
  • Gerber.zip — Gerber files prepared for PCB fabrication

Software: KiCad


Documentation

The FM Radio Transmitter.pdf contains the detailed technical documentation of the project, including the design, calculations, circuit analysis, simulation results, and antenna analysis.

For complete technical details, refer to the FM Radio Transmitter.pdf.


Software Used

SoftwarePurpose
LTspiceTransmitter circuit design and simulation
KiCadSchematic and PCB design
MMANA-GAL100 MHz antenna modeling and simulation

How to Explore the Repository

  • To inspect the transmitter circuit, open the .asc file using LTspice.
  • To inspect the PCB schematic, open the .kicad_sch file using KiCad.
  • To inspect the PCB layout, open the .kicad_pcb file using KiCad.
  • To fabricate the PCB, use the Gerber.zip manufacturing files.
  • To inspect the 100 MHz antenna, open the .maa file using MMANA-GAL.
  • For detailed technical specifications, calculations, and simulation results, refer to the FM Radio Transmitter PDF.

Parts

61
QtyValueFootprintReferences
4100nFCapacitor_SMD:C_0805_2012MetricC4, C10, C17, C23
3100pFCapacitor_SMD:C_0603_1608MetricC8, C13, C14
330pFCapacitor_SMD:C_0603_1608MetricC1, C2, C7
3BF494Package_TO_SOT_THT:TO-92_InlineQ1, Q2, Q3
20.1Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR11, R14
20.1uFCapacitor_SMD:C_0805_2012MetricC9, C26
2100nHInductor_SMD:L_0603_1608MetricL1, L6
210pFCapacitor_SMD:C_0603_1608MetricC6, Cin1
23.3pFCapacitor_SMD:C_0603_1608MetricC5, C12
247pFCapacitor_SMD:C_0603_1608MetricC20, C21
268nHInductor_SMD:L_0603_1608MetricL5, L8
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical12v1, 24v1
2LOGOLOGOG***, G***
11.5kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
11.8kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR12
1100kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR8
110MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalRbleed1
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR6
110nFCapacitor_SMD:C_0805_2012MetricC11
1120nHInductor_SMD:L_0603_1608MetricL4
11kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
11uHInductor_SMD:L_0805_2012MetricL3
12.2kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR10
120pFCapacitor_SMD:C_0603_1608MetricC3
1220nHInductor_SMD:L_0603_1608MetricL2
12SC1971Package_TO_SOT_THT:TO-220-3_VerticalQ4
133pFCapacitor_SMD:C_0603_1608MetricC16
14.7kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1470Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
1470pFCapacitor_SMD:C_0603_1608MetricC15
1470uF_450VCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC18
147kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalRbias1
147uHInductor_SMD:L_0805_2012MetricL11
15.6kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR13
15kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR9
168kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR5
168pFCapacitor_SMD:C_0603_1608MetricC19
1820Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7
182nHInductor_SMD:L_0603_1608MetricL7
182pFCapacitor_SMD:C_0603_1608MetricC22
1BB910Package_TO_SOT_THT:TO-92_InlineD1
1Conn_01x03_PinConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ1
1Conn_CoaxialConnector_Coaxial:SMA_Amphenol_901-144_VerticalJ2

Similar boards

  • 2 layers84.1 × 63.6 mmRadio 1, the printed circuit board in 3D

    Radio 1

    Junquilh0/FM-radio

    While making this I saw a lot of different designs for similar radios. Mine is made of essentially two parts: ### The receiver - The coil (L) and the small variable capacitor (Cosc) choose which frequency the radio…

    28 parts
  • 2 layers390 × 78.2 mmMBO, the printed circuit board in 3D

    MBO

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    61 parts960Apache-2.0
  • 2 layersTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    61 parts530
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    61 parts379Apache-2.0
  • 2 layers135.9 × 89.5 mmLeft, the printed circuit board in 3D

    Left

    TeXitoi/keyseebee

    KeySeeBee is a split ergo keyboard. It is only 2 PCB (so the name) with (almost) only SMD components on it. It's only a keyboard, no LED, no display, nothing more than keys and USB.

    61 parts348MIT
  • 2 layers59.7 × 57.5 mmFunBox, the printed circuit board in 3D

    FunBox

    GuitarML/FunBox

    Stereo guitar pedal platform using Daisy Seed.

    61 parts289MIT
  • 2 layers35 × 38.4 mmHandgelenk, the printed circuit board in 3D

    Handgelenk

    Jeija/esp8266-smartwatch

    ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...

    61 parts233

Questions

How big is the RF Transmitter PCB?

It measures 140 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RF Transmitter use?

61 parts, built around the BF494, 2SC1971 and BB910. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RF Transmitter KiCad files?

From the Lasthope027/Radio-station repository on GitHub, at the commit this page was made from: the board is Transmitter/KiCad/RF Transmitter.kicad_pcb and its schematic Transmitter/KiCad/RF Transmitter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RF Transmitter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).