Skip to the content
2 layers118 × 86 mmOpen agent micropad rev b choc v1, the printed circuit board in 3D

Open agent micropad rev b choc v1

Lamdevelopper/my_codex_micropad

For Hackclub Keeb proyect (If you'r an Open AI employee pleasse send me one of the codex micropadd (thank you so much))

Size
118 × 86 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
59
Pads
248
Tracks, vias
0, 0
Pours
3
Routed
Not yet
KiCad
KiCad 10.0 (file 20260206)
Created
16 Jul 2026
Updated
18 Jul 2026

Overview

Open agent micropad rev b choc v1 is an open-source printed circuit board by Lamdevelopper, from the Lamdevelopper/my_codex_micropad repository on GitHub. It is a 2-layer board of 118 × 86 mm with 42 parts on 59 nets.

It is built around the IS31FL3218-QFLS2-TR, 1N4148W and M2.5, with the B2B-PH-K-S and EC11E15244G1 among its other parts. Its parts include 19 diodes, 14 switches, 2 ICs and 1 connector. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

Main components

5

README

PCB_files/README.md

Open Agent Micropad PCB — Rev A preliminary placement

This KiCad board is a mechanical placement study, not a fabrication release.

Fixed by the current CAD plan

  • Board maximum: 118 x 86 x 1.6 mm, R5 corners.
  • Thirteen physical MX switch centres use the layout from Documents/CAD_PCB_Dimensional_Plan.md.
  • The 2U Push-to-Talk control is SW11 + SW12 at a 19.05 mm pitch; firmware combines them as one logical action.
  • Four M2.5 support holes have a preliminary 2.8 mm clearance.
  • The board reserves the selected families: MX switch, reverse-mount RGB, EC11 encoder, ALPS RKJXV joystick, and a 34 x 18 mm RP2040 Pro Micro-style USB-C module. The RP2040 envelope has 1.5 mm of preliminary board-edge clearance.

Intentionally open (do not route or fabricate yet)

  • Exact MPN and pinout for the RP2040 module.
  • Exact Kailh hot-swap socket and its footprint. It is not yet placed because its mechanical offset is MPN-specific.
  • Exact joystick, encoder, RGB LED, diode, RGB level shifter, USB/power circuit and decoupling network.
  • All nets, schematic capture, diode placement, matrix assignment, routing, pours, and fabrication files.
  • Mount-hole locations until the 1:1 ergonomic mockup and the 2U PTT coupon pass.

The candidate LED model shown in the 3D export is the KiCad SK6812MINI-E reverse-mount model. It is a placement/optics reference only, not a locked procurement decision.

Next electrical revision

  1. Select exact MPNs and add datasheets.
  2. Capture the schematic with a 4 x 4 matrix, diode direction, RGB power/data chain, encoder, joystick and debug/reset connections.
  3. Synchronize exact footprints; replace each envelope placeholder.
  4. Complete placement, route, fill GND zones and run ERC/DRC.
  5. Export STEP/Gerbers only after the mechanical coupon and electrical checks pass.

Parts

42
QtyValueFootprintReferences
131N4148WD_SOD-123D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13
11Sunset CPG135001D02-3SW_choc_v1_HS_CPG135001S30_1uSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW13
6XL-3528RGBW-HM - PINOUT/FOOTPRINT PROVISIONALLED_RGB_1210LED1, LED2, LED3, LED4, LED5, LED6
4M2.5MountingHole_2.7mm_M2.5H1, H2, H3, H4
2Ambients Nocturnal 20gfSW_choc_v1_HS_CPG135001S30_1uSW11, SW12
1B2B-PH-K-SJST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ1
1EC11E15244G1RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmENC1
1IS31FL3218-QFLS2-TRQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mmU2
1POWERSW_SPDT_CK_JS102011SAQNSW14
1RKJXV122400R - FOOTPRINT TO VERIFYPinHeader_1x05_P2.54mm_VerticalJOY1
1XIAO nRF52840 PlusXIAO-nRF52840-Plus-SMDU1

Similar boards

  • 2 layers70 × 120 mmMultimetre V2, the printed circuit board in 3D

    Multimetre V2

    hilham1990/Multimetre

    AkademiUsta Multimetre: ATmega328P + 16 bit ADS1115 ADC, OLED ekran ve Li-ion pil ile açık kaynak el multimetresi. KiCad 10 dosyaları, Gerber ve LCSC kodlu BOM. Kart henüz üretilmedi.

    86 parts
  • 4 layers100 × 50 mmController, the printed circuit board in 3D

    Controller

    usbalbin/hw-half-bridge

    226 parts
  • 2 layers71.8 × 62.2 mmAir quality pcb v7, the printed circuit board in 3D

    Air quality pcb v7

    NilsEngelbach/air-quality-pcb

    Seventh iteration: ESP8266 → ESP32-C3 (native USB, no UART bridge), fixes from the v6 design review, right-angle switches with longer actuators, a STEMMA QT port for optional sensors, and charge-status sensing.

    85 parts
  • 2 layers66 × 40 mmFoveaCamDuo PCB, the printed circuit board in 3D

    FoveaCamDuo PCB

    uf-focus-lab/DuoController

    KiCad PCB Project for FoveaCamDuo Controller

    19 parts
  • 2 layers72.1 × 70.7 mmBramble, the printed circuit board in 3D

    Bramble

    erikbeerepoot/bramble

    Bramble: Precision Agriculture Mesh

    121 parts
  • 4 layers130 × 90 mmLochord hw, the printed circuit board in 3D

    Lochord hw

    kiwifruit0/LoChord

    An open-source version of the popular midi device: HiChord

    91 parts6
  • 6 layers120 × 57 mm.tmp research, the printed circuit board in 3D

    .tmp research

    NovaPrime18/nitride-nano

    USB-C PD3.1 240W compatible 60V buck/boost converter nano powersupply

    323 parts3CERN-OHL-S-2.0

Questions

How big is the Open agent micropad rev b choc v1 PCB?

It measures 118 × 86 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Open agent micropad rev b choc v1 use?

42 parts, built around the IS31FL3218-QFLS2-TR, 1N4148W, M2.5 and B2B-PH-K-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Open agent micropad rev b choc v1 KiCad files?

From the Lamdevelopper/my_codex_micropad repository on GitHub, at the commit this page was made from: the board is hardware/kicad/open_agent_micropad_rev_b_choc_v1/open_agent_micropad_rev_b_choc_v1.kicad_pcb and its schematic hardware/kicad/open_agent_micropad_rev_b_choc_v1/open_agent_micropad_rev_b_choc_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Open agent micropad rev b choc v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask Lamdevelopper before reusing the design.