2 layers
BuckConverterPrj placed
Lama072004/AlteSemester
Unterlagen von vorigen Semester des Studiengangs EIT-DU
40 parts1
2 layers72.4 × 43.2 mm
BuckConverterPrj
Lama072004/AlteSemester1Unterlagen von vorigen Semester des Studiengangs EIT-DU
- Size
- 72.4 × 43.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 18
- Pads
- 82
- Tracks, vias
- 144, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Oct 2025
- Updated
- 25 Mar 2026
Overview
BuckConverterPrj is an open-source printed circuit board by Lama072004, from the Lama072004/AlteSemester repository on GitHub. It is a 2-layer board of 72.4 × 43.2 mm with 48 parts on 18 nets, routed with 144 tracks and 11 vias.
It is built around the LTC1624CS8 and IRLML0030. Its parts include 3 resistors, 1 IC, 1 diode, 1 transistor and 1 inductor.
Main components
2Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Jumper_2_Open | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP_ith1, JP_ith2, JP_ith3, JP_L1, JP_Rfb1 |
| 4 | TPgnd | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | GND1, GND2, GND3, GND4 |
| 3 | 22k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Rc1, Rc2, Rc3 |
| 3 | 470p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Cc1, Cc2, Cc3 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Cb1, Csen1 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1div1, R1div2 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | IN1, OUT1 |
| 2 | LOGO | LOGO | G***, G01 |
| 1 | 100m | BuckConverterLibrary:Shunt_4527 | Rsen1 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | Cout2 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Cfb1 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Rgate1 |
| 1 | 220n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | Cin2 |
| 1 | 22u | Capacitor_SMD:CP_Elec_6.3x5.8 | Cin1 |
| 1 | 47u | Capacitor_SMD:CP_Elec_6.3x5.8 | Cout1 |
| 1 | 62k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2div1 |
| 1 | DRB070MM-30 | Diode_SMD:D_SOD-123 | D1 |
| 1 | IRLML0030 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | L | BuckConverterLibrary:DR74 | L1 |
| 1 | LTC1624CS8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | TPL1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TPL1 |
| 1 | TPdrv | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TPdrv1 |
| 1 | TPfb | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TPfb1 |
| 1 | TPgate | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TPgate1 |
| 1 | TPin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TPin1 |
| 1 | TPith | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TPith1 |
| 1 | TPout1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TPout1 |
| 1 | TPrsen | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TPrsen1 |
| 1 | TPsw | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TPsw1 |
The 44 most common of 48 parts.
More from Lama072004/AlteSemester
1Similar boards
- 6 layers80 × 80 mm
- 4 layers358 × 40 mm
Longboi
KungfuPancake/longboi
Possibly the longest controller board to control the BoxTurtle AFC
297 parts7Apache-2.0 - 2 layers22.1 × 18 mm
Helena base sd
Reisi/Helena
Helena is an alternative driver for the Yinding or KD2 Headlight Cycling Lamp.
59 parts5BSD-2-Clause - 4 layers100 × 100 mm
PS BPSLeader
lhr-solar/PS-BPSLeader
Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.
388 parts3MIT - 2 layers59.1 × 75.7 mm
PS MotorControllerInterfacePCB
lhr-solar/PS-MotorControllerInterfacePCB
Provides power conversion/protection and fan control for the Prohelion WaveSculptor 22 motor controller
127 parts3 - 2 layers86.6 × 71.8 mm
VehicleControlUnit
lhr-solar/VCAT-VehicleControlUnit
Vehicle Control Unit (VCU) for the 2026 Longhorn Racing Solar car
142 parts2MIT - 2 layers45 × 72 mm
Relay
adarwoo/modbus_relay
A modbus RTU relay board with 3 relays for the CNC. This uses the ASX framework
43 parts1 - 2 layers
Pcb actionneur ventouse
Brasseur2robot/Les-brasseurs-d-idees
Codebase de l'équipe légende des brasseurs d'idées concourant à la coupe de France de robotique. Vous pouvez y retrouver les différents fichiers utilisés pour la création et le fonctionnement de notre robot principal et…
25 parts1GPL-3.0
Questions
How big is the BuckConverterPrj PCB?
It measures 72.4 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BuckConverterPrj use?
48 parts, built around the LTC1624CS8 and IRLML0030. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BuckConverterPrj KiCad files?
From the Lama072004/AlteSemester repository on GitHub, at the commit this page was made from: the board is Unterlagen/Michi/Semester 4/Leistungselektronik/BoostConverter/finalProduct/buckConverterPrj/buckConverterPrj.kicad_pcb and its schematic Unterlagen/2.malDownload/Michi/Semester 4/Leistungselektronik/BoostConverter/finalProduct/buckConverterPrj/buckConverterPrj.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BuckConverterPrj design in my own project?
Its repository states no licence, so its author keeps all rights: ask Lama072004 before reusing the design.