
MinisumoV2 A
LaboratorioGluon/Minisumo-FullMango
Robot minisumo de competición para la OSHWDEM 2026

Robot minisumo de competición para la OSHWDEM 2026
MinisumoV2 is an open-source printed circuit board by LaboratorioGluon, from the LaboratorioGluon/Minisumo-FullMango repository on GitHub, published under the MIT licence. It is a 2-layer board of 80 × 67 mm with 97 parts on 75 nets, routed with 514 tracks and 370 vias.
It is built around the LM358, AMS1117-3.3 and IRM-56384, with the TPS563201, WS2812B and IRLML2502 among its other parts. Its parts include 29 capacitors, 28 resistors, 12 connectors, 7 ICs and 5 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.
Mi robot de competición para la OSHWDEM 2026, el minisumo :tangerine: FullMango :tangerine: (Perdón, no había emoji de un mango).
Hecho 100% en directos de Twitch y Youtube, desde las pruebas de concepto, la electrónica con PCB y la programación del microcontrolador de ST.
Schematics/MinisumoV2/El robot minisumo FullMango se basa en un control por máquina de estados. Siendo los 3 principales:
start_state en el código): Una vez que el Robot se ha inicializado correctamente espera a la señal del mando RC5seek_state): Es el patrón de búsqueda hasta encontrar al enemigo.fight_state): Cuando el robot ya ha encontrado al enemigo y va a por él.
Para el control de motores se ha implementado una doble rampa de cara a intentar resolver el problema de los caballitos: los motores son muy potentes y si pasamos al 80% de golpe, el robot se da la vuelta.
| Pin | Function |
|---|---|
| Ninguno | FWD |
| 1 | RIGHT |
| 2 | LEFT |
| 3 | BACK |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R10, R11, R12, R15, R16, R17, R19, R20, R21, R23, R24 |
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C7, C8, C9, C11, C20, C22, C24 |
| 4 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R7, R8 |
| 4 | G*** | kibuzzard-69A73775 | kibuzzard-69A73775, kibuzzard-69A73775, kibuzzard-69A73775, kibuzzard-69A73775 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C28, C29 |
| 3 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C17, C18 |
| 3 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R14 |
| 3 | 2u2 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C27 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R22 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21, C25 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C10 |
| 2 | 470u | Capacitor_SMD:CP_Elec_6.3x5.4 | C23, C26 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | MP6551 | GluonLib:QFN-14_MP6551_MNP | U5, U6 |
| 2 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D4, D5 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x5.4 | C14 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | 3u3 | Inductor_SMD:L_Sunlord_MWSA0412S | L1 |
| 1 | 47 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 54k9 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | BATT | Connector_AMASS:AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J2 |
| 1 | BYPASS | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | C_Polarized_US | Capacitor_SMD:CP_Elec_4x5.3 | C19 |
| 1 | FaultL | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | FaultR | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | G*** | kibuzzard-69A732F2 | kibuzzard-69A732F2 |
| 1 | G*** | kibuzzard-69A73765 | kibuzzard-69A73765 |
| 1 | G*** | kibuzzard-69A73CC0 | kibuzzard-69A73CC0 |
| 1 | G*** | kibuzzard-6A21495C | kibuzzard-6A21495C |
| 1 | IRLML2502 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | IRM-56384 | OptoDevice:Vishay_MOLD-3Pin | U7 |
| 1 | LINE_LEFT | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J11 |
| 1 | LINE_RIGHT | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J10 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | MOTOR_L_1 | TestPoint:TestPoint_Pad_4.0x4.0mm | J3 |
| 1 | MOTOR_L_2 | TestPoint:TestPoint_Pad_4.0x4.0mm | J4 |
| 1 | MOTOR_R_1 | TestPoint:TestPoint_Pad_4.0x4.0mm | J5 |
| 1 | MOTOR_R_2 | TestPoint:TestPoint_Pad_4.0x4.0mm | J6 |
| 1 | SHARP_CENTER | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J9 |
| 1 | SHARP_LEFT | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J15 |
| 1 | SHARP_RIGHT | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J8 |
| 1 | STM32H523CCTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD_CONNECTOR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | SW_DIP_x04 | Button_Switch_SMD:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W8.61mm_P2.54mm | SW1 |
| 1 | TPS563201 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | UART_DBG | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | vBatt | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
The 95 most common of 97 parts.

LaboratorioGluon/Minisumo-FullMango
Robot minisumo de competición para la OSHWDEM 2026



VABISMO/QSSC
Quantum Solid State Chip - NV DIAMOND . Spin Defect Simulator and hardware controller with Qiskit backend (WIP)

Mini-Touch/cursor-oled
Cursor Displayer: ESP32 HP20030-D status panel (PCB + Code)

MarkWestbroek/MusicBrain
A central brain running on teensy or a lighter MCU to process any control signals (MIDI, CV, our own) into the same but adding logic, ADSRs, DCOs, CV matrices etc. to it


fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG

LaboratorioGluon/Rc-Test-Bench
Projecto para caracterización de motores RC.
It measures 80 × 67 mm and has 2 copper layers, 1.6 mm thick.
97 parts, built around the LM358, AMS1117-3.3, IRM-56384 and TPS563201. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LaboratorioGluon/Minisumo-FullMango repository on GitHub, at the commit this page was made from: the board is Schematics/MinisumoV2/MinisumoV2.kicad_pcb and its schematic Schematics/MinisumoV2/MinisumoV2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).