
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6

Segundo parte del curso de Robotica en twitch de LabGluon, el autobalanceado Justiciero.
PCB Robot is an open-source printed circuit board by LaboratorioGluon, from the LaboratorioGluon/Curso-Justiciero repository on GitHub. It is a 2-layer board of 42 × 72 mm with 24 parts on 40 nets, routed with 134 tracks and 74 vias.
It is built around the BMI160. Its parts include 5 capacitors, 4 ICs, 4 connectors and 1 resistor. It belongs with the robots and motor control boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C5 |
| 2 | 10u | Capacitor_SMD:CP_Elec_4x4.5 | C2, C4 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Alimentacion | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | BMI160 | Justiciero:BMI160_pinchos | U3 |
| 1 | BOOT_SEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | ESP32-WROOM-E | Espressif:ESP32-WROOM-32E | U1 |
| 1 | G*** | kibuzzard-684B1AB8 | kibuzzard-684B1AB8 |
| 1 | G*** | kibuzzard-684B1A20 | kibuzzard-684B1A20 |
| 1 | G*** | kibuzzard-684B1A93 | kibuzzard-684B1A93 |
| 1 | G*** | kibuzzard-684B1AB0 | kibuzzard-684B1AB0 |
| 1 | G*** | kibuzzard-684B1AD4 | kibuzzard-684B1AD4 |
| 1 | MotorL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | MotorR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | TB6612FNG | Package_SO:SSOP-24_5.3x8.2mm_P0.65mm | U2 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | ~ | Justiciero:3v3Reg | U4 |
The 20 most common of 24 parts.

shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6

ultimaterobotics/uECG_v4_3_all
uECG - very small wearable ECG device that sends raw and processed data over BLE





rmingon/Falcon-Edge
A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.

OpenAXES-IMU/OpenAXES
Hardware design files and source code for an open-access wireless IMU
It measures 42 × 72 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the BMI160. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LaboratorioGluon/Curso-Justiciero repository on GitHub, at the commit this page was made from: the board is PCB_Robot/PCB_Robot.kicad_pcb and its schematic PCB_Robot/PCB_Robot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LaboratorioGluon before reusing the design.