

Prakses shema 11.04 bez Atmega
Programmambe sensor stage
- Size
- 125.1 × 115.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 83
- Pads
- 173
- Tracks, vias
- 496, 83
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Mar 2023
- Updated
- 2 Oct 2023
Overview
Prakses shema 11.04 bez Atmega is an open-source printed circuit board by LZP-2020-1-0200, from the LZP-2020-1-0200/Sensor-3D-control repository on GitHub. It is a 2-layer board of 125.1 × 115.3 mm with 31 parts on 83 nets, routed with 496 tracks and 83 vias.
It is built around the WEMOS D1 MINI, ULN2003 and SA6.0A. Its parts include 7 connectors, 5 ICs, 4 capacitors, 4 resistors and 4 diodes. It belongs with the ESP8266 and AVR (ATmega, ATtiny) boards of this library.
Main components
3WEMOS D1 MINI
A mini wifi board with 4MB flash based on ESP-8266EX, hardware version 4.0.0.LolinUncategorisedULN2003
SOP-161.1V@250uA,100mA 25pF 2V 30V 500mA 50uA 50uA Seven channels SOP-16 Darlington Transistor Arrays ROHSBLDarlington Transistor ArraysSA6.0A
DO-204AC(DO-15)-65℃~+175℃ 10.3V 49.5A@10/1000us 500W@10/1000us 6.5V 600uA 7.37V IEC 61000-4-2、IEC 61000-4-4 TVS Unidirectional DO-204AC(DO-15) ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J7, J8 |
| 3 | ULN2003 | Package_DIP:DIP-16_W7.62mm_LongPads | U3, U6, U7 |
| 2 | 10k* | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 2 | 390 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 4,7uF | Capacitor_THT:CP_Radial_D10.0mm_P3.80mm | C1, C4 |
| 2 | LED | LED_THT:LED_D3.0mm | D2, D3 |
| 2 | SA6.0A | Diode_THT:D_DO-15_P12.70mm_Horizontal | D1, D4 |
| 1 | 0,5A | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F2 |
| 1 | 2A | Fuse:Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open | F1 |
| 1 | 68 pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C7 |
| 1 | 68pF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | Arduino_Micro | Arduino:Arduino_Micro | U2 |
| 1 | Barrel_Jack_Switch_Pin3 | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | DB25_Plug | Connector_Dsub:DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm | J2 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U1 |
The 30 most common of 31 parts.
Similar boards
- 2 layers100 × 99.5 mm

- 4 layers99.6 × 76.2 mm

- 2 layers31 × 64 mm

Power driver
jmfriedt/SDR-GB-SAR
Opensource, openhardware implementation of a Software Defined Radio (SDR) Ground Based Synthetic-Aperture RADAR (GB-SAR)
6 parts70 - 2 layers160 × 100 mm

MPCNC Nano Estlcam Shield
tnn85/MPCNC-Nano-Estlcam-Shield
Ein CNC Shield für die MPCNC in Verwendung mit Estlcam
96 parts70 - 2 layers42.5 × 43.2 mm

ElectronicFocuser
jlecomte/ascom-oag-focuser
Open Source ASCOM-Compatible OAG Focuser For Astrophotography
4 parts55MIT - 4 layers100 × 49.8 mm

- 2 layers134 × 91 mm

- 2 layers75 × 60 mm

DUTler V2
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
54 parts23Apache-2.0
Questions
How big is the Prakses shema 11.04 bez Atmega PCB?
It measures 125.1 × 115.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Prakses shema 11.04 bez Atmega use?
31 parts, built around the WEMOS D1 MINI, ULN2003 and SA6.0A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Prakses shema 11.04 bez Atmega KiCad files?
From the LZP-2020-1-0200/Sensor-3D-control repository on GitHub, at the commit this page was made from: the board is stepper_driver/KiCad/KiCad faili/Prakses shema 11.04 bez Atmega.kicad_pcb and its schematic stepper_driver/KiCad/KiCad faili/Prakses shema 11.04 bez Atmega.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Prakses shema 11.04 bez Atmega design in my own project?
Its repository states no licence, so its author keeps all rights: ask LZP-2020-1-0200 before reusing the design.