
Schematics
pcbcupid/Kicad-7-Series
This Repo is a collection of project files to a series of KiCad 7 tutorial, Which will take you through the journey of learning KiCad from scratch to making your first Printed Circuit Board.

Implementation of Watermark sensor using arduino, attiny85 and RF modules
Signal send is an open-source printed circuit board by LARIS13, from the LARIS13/Soil_Water_Tension_RF_sensor repository on GitHub. It is a 2-layer board of 90 × 45 mm with 7 parts on 8 nets, routed with 41 tracks and 0 vias.
It is built around the ATTINY85V-10PU. Its parts include 2 capacitors, 1 resistor and 1 IC. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Implementation of Watermark sensor using arduino, attiny85 and RF modules including:
C++ code
KiCad blueprints for PCB
LaTeX document explaining theory, limitations and implementation of water measurement techniques.
Manchester RF library: https://github.com/mchr3k/arduino-libs-manchester
tinysnore is only used to sleep Attiny85 for more than the max Watchdog timer time, which is around 8 seconds: https://github.com/connornishijima/TinySnore
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | 100uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | ATtiny85V-10P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | BatteryHolder_Keystone_2479_3xAAA | Battery:BatteryHolder_Keystone_2479_3xAAA | 3.3 - 5V |
| 1 | PinHeader_1x03_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | RF_module |
| 1 | WMS200 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | WMS200 |

pcbcupid/Kicad-7-Series
This Repo is a collection of project files to a series of KiCad 7 tutorial, Which will take you through the journey of learning KiCad from scratch to making your first Printed Circuit Board.



oskitone/higher_lower
A handheld electronic game you can play with your eyes closed




ivourshalldevour/bicycle_odometer
A repository to hold all the code written for the MSP430 microcontroller I used while building my energy harvesting powered bicycle odometer.
It measures 90 × 45 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the ATTINY85V-10PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LARIS13/Soil_Water_Tension_RF_sensor repository on GitHub, at the commit this page was made from: the board is Signal-send/Signal-send.kicad_pcb and its schematic Signal-send/Signal-send.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LARIS13 before reusing the design.