

ILOHA distribute circuit
Power and CAN distribution board for ILOHA's robstride.
- Size
- 50 × 50 mm
- Copper layers
- 4
- Thickness
- 1.57 mm
- Parts
- 11
- Nets
- 14
- Pads
- 32
- Tracks, vias
- 26, 223
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 May 2026
- Updated
- 8 May 2026
Overview
ILOHA distribute circuit is an open-source printed circuit board by KyotoVLATech, from the KyotoVLATech/Circuit_ILOHA repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 50 × 50 mm with 11 parts on 14 nets, routed with 26 tracks and 223 vias.
It is built around the XT30(2+2)PW-M and XT90PW-F. Its parts include 2 ICs, 2 fuses and 1 connector.
Main components
2README
README.mdCircuit_ILOHA
Power and CAN distribution board for ILOHA's robstride.
- KiCad design data:
ILOHA_distribute_circuit/ - Board photos:
images/
Requirement: KiCad 9 or newer is required to open the design files.
BOM (Bill of Materials)
| LCSC Part | Manufacture Part Number | Manufacturer | Qty |
|---|---|---|---|
| C160300 | B04B-XASK-1N(LF)(SN) | JST | 2 |
| C3040689 | XT90PW-M.G.Y | Changzhou Amass | 1 |
| C1926803 | XT30PW(2+2)-M.G.B | Changzhou Amass | 2 |
| C352820 | 3557 2 | Keystone | 2 |
Notes
- Fuse: A 30A low-profile mini fuse (低背ヒューズ 30A) is required for this board.
- Custom Cables: Instructions and a guide for making custom cables will be added in a future update.
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 3557-2 | digikeyparts:FUSE_3557-2 | F1, F2 |
| 2 | Conn_01x04 | Connector_JST:JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical | CH1, CH2 |
| 2 | XT30(2+2)PW | easyeda2kicad:CONN-TH_4P-XT30PW-M | U1, U2 |
| 1 | XT90PW | easyeda2kicad:CONN-TH_XT90PW-M.G.Y | CN1 |
The 7 most common of 11 parts.
Similar boards
- 2 layers141 × 40 mm

- 2 layers45 × 45 mm

- 2 layers140.3 × 89.3 mm

- 4 layers100 × 80 mm

RBPS
riteshsalikeripatil/Battery_Management_System
PCB and schematic design files for the RBPS hardware project.
98 parts1 - 4 layers100 × 100 mm

Pdb
javierveras/projectav-telemetry-pdb-2026
Our power distribution and telemetry system's hardware, firmware, and technical documentation.
104 parts - 4 layers47 × 62.5 mm

- 4 layers101.6 × 120.6 mm

- 2 layers75.7 × 61 mm

Questions
How big is the ILOHA distribute circuit PCB?
It measures 50 × 50 mm and has 4 copper layers, 1.57 mm thick.
What parts does the ILOHA distribute circuit use?
11 parts, built around the XT30(2+2)PW-M and XT90PW-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ILOHA distribute circuit KiCad files?
From the KyotoVLATech/Circuit_ILOHA repository on GitHub, at the commit this page was made from: the board is ILOHA_distribute_circuit/ILOHA_distribute_circuit.kicad_pcb and its schematic ILOHA_distribute_circuit/ILOHA_distribute_circuit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ILOHA distribute circuit design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).