

RCboat
EECD Project - swimming boat
- Size
- 45.5 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 62
- Pads
- 213
- Tracks, vias
- 297, 25
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 Oct 2022
- Updated
- 23 Jan 2023
Overview
RCboat is an open-source printed circuit board by KubaToGrzechu, from the KubaToGrzechu/EECD-3 repository on GitHub. It is a 2-layer board of 45.5 × 50 mm with 48 parts on 62 nets, routed with 297 tracks and 25 vias.
It is built around the AMS1117-3.3 and MPU-6000. Its parts include 18 capacitors, 11 resistors, 5 ICs, 3 connectors and 2 switches. It belongs with the STM32 boards of this library.
Main components
2AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMPU-6000
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳、过量程保护功能 QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12, C15, C16 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R6, R7 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3 |
| 3 | 20p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8 |
| 3 | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | REF, REF, REF |
| 2 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C17 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C13 |
| 2 | Battery | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J2, J3 |
| 2 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1, M2 |
| 1 | 0.75k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 100u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 33u | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 390 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 6800p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 8.000MHZ | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm_HandSoldering | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BD9G341EFJ | Package_SO:HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm_ThermalVias | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | BLDC1 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J1 |
| 1 | D | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | MPU-6000 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U5 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U3 |
| 1 | STM32F100C4Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_1P2T_CK_OS102011MS2Q | SW2 |
More from KubaToGrzechu/EECD-3
1- 2 layers45.5 × 50 mm

Similar boards
- 6 layers50 × 81.3 mm

- 2 layers67 × 87 mm

- 4 layers40 × 40 mm

- 2 layers74 × 45 mm

- 4 layers47.5 × 62 mm

- 4 layers36 × 36 mm

- 4 layers104.2 × 77.7 mm

- 4 layers36 × 36 mm

Questions
How big is the RCboat PCB?
It measures 45.5 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RCboat use?
48 parts, built around the AMS1117-3.3 and MPU-6000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RCboat KiCad files?
From the KubaToGrzechu/EECD-3 repository on GitHub, at the commit this page was made from: the board is Final 1.0/RCboat.kicad_pcb and its schematic EDA files/RCboat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RCboat design in my own project?
Its repository states no licence, so its author keeps all rights: ask KubaToGrzechu before reusing the design.