

Tps56320
My OPENSOURCE hardware
- Size
- 26.4 × 10.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 7
- Pads
- 31
- Tracks, vias
- 10, 18
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Sep 2024
- Updated
- 23 Aug 2025
Overview
Tps56320 is an open-source printed circuit board by Krysztal112233, from the Krysztal112233/HardwareDesign repository on GitHub. It is a 2-layer board of 26.4 × 10.2 mm with 15 parts on 7 nets, routed with 10 tracks and 18 vias.
It is built around the TPS563201DDCR and SMAJ17A. Its parts include 6 capacitors, 1 resistor, 1 IC, 1 diode and 1 inductor.
Main components
2TPS563201DDCR
SOT-23-THIN-6-40℃~+125℃@(TJ) 1 3A 4.5V~17V 580kHz 768mV~7V Adjustable Buck Buck Built-in Yes SOT-23-THIN-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersSMAJ17A
SMA-55℃~+150℃ 14.5A 17V 20.9V 27.6V 400W 5uA TVS Unidirectional SMA ESD and Surge Protection (TVS/ESD) ROHSDiodes IncorporatedESD And Surge Protection (TVS/ESD)
README
modules/tlv62569/README.mdDCDC step-down voltage module based TLV62569
This module use TLV62569 as it's Step-Down voltage regulator.
But you can use any other pin-compatible chip on it :)
Protection
This module using SMAJ17A TVS as it's protection. If you wanna higher or lower voltage protection, you can use other TVS instead of SMAJ17A.
Notes
Can I use any other convert?
Yes, of course! This module compatible with any other DCDC voltage step-down converter who use SOT23-5 footprint.
But you have to redesign of the resistor and capacitor's value.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP3, TP4 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 2.2uH | Inductor_SMD:L_Changjiang_FXL0420 | L1 |
| 1 | 200k | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | SMAJ17A | Diode_SMD:D_SMA | D1 |
| 1 | TPS563201DDCR | easyeda2kicad:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U1 |
More from Krysztal112233/HardwareDesign
2- 2 layers19.3 × 11.3 mm

- 2 layers18.5 × 8.5 mm

Similar boards
- 4 layers60 × 30 mm

Motokit controlsystem
S0L1DDEV/motormod-pcb-controlsystem
CFMoto lightkit mod, driving a lightkit based on engine information read through CAN. This PCB is part of the system responsible for reading frames and outputting a animation on a neopixel lightstrip
47 parts - 4 layers70 × 60 mm

CAN Logger V2.0
deep-th/CAN_Logger
This is a compact and reliable CAN logger board built for automotive and industrial applications. It features the ESP32-S3 microcontroller and MCP25625 CAN controller with integrated transceiver, supporting two…
138 parts3 - 4 layers100 × 100 mm

- 2 layers100 × 60 mm

- 6 layers133.1 × 133.1 mm

AERIS H743-PCB
7903555032/AERIS-H743-PCB
A 6-layer STM32H743-based embedded development and flight-control/data-logging PCB designed as a practical hardware-design and PCB-layout project.
114 parts1 - 2 layers98.2 × 82.5 mm

- 4 layers64 × 64 mm

Flight computer
daniel360kim/ember
Thrust vector control rocket via differentiable simulation and reinforcement learning.
96 parts - 2 layers56.5 × 40.5 mm

USBC M2E HaLow Adapter
Diode663/USBC_M2E_HaLow_Adapter
USB-C (USB 2.0) to M.2 Key-E carrier for the Gateworks GW16170 Wi-Fi HaLow card. KiCad 10, generated from Python, Rev A sent to JLCPCB.
30 partsCERN-OHL-P-2.0
Questions
How big is the Tps56320 PCB?
It measures 26.4 × 10.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tps56320 use?
15 parts, built around the TPS563201DDCR and SMAJ17A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tps56320 KiCad files?
From the Krysztal112233/HardwareDesign repository on GitHub, at the commit this page was made from: the board is modules/tps56320/tps56320.kicad_pcb and its schematic modules/ch224/ch224a/ch224a.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tps56320 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Krysztal112233 before reusing the design.