

UsbHost
Automatically exported from code.google.com/p/tindenet
- Size
- 79 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 30
- Pads
- 180
- Tracks, vias
- 874, 59
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 29 Mar 2015
- Updated
- 29 Mar 2015
Overview
UsbHost is an open-source printed circuit board by Kreyl, from the Kreyl/tindenet repository on GitHub. It is a 2-layer board of 79 × 16 mm with 41 parts on 30 nets, routed with 874 tracks and 59 vias.
It is built around the CC1101RGP, 0896BM15A0001E and NCP583SQ28. Its parts include 20 capacitors, 4 resistors, 2 diodes and 1 inductor. It belongs with the STM32 boards of this library.
Main components
3CC1101RGP
QFN-20-EP(4x4)-116dBm -40℃~+85℃ 1.8V~3.6V 12.3mA 12dBm 14.3mA 600Kbps ISM SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSTexas InstrumentsRF Transceiver ICs0896BM15A0001E
SMD,2x1.25mmSMD,2x1.25mm Balun ROHSJohanson DielectricsBalunNCP583SQ28
SC-82AB-40℃~+85℃@(Ta) 1 150mA 1uA 2.8V 250mV@(150mA) 6V Enable Fixed Positive SC-82AB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | CAP_0603 | C7, C11, C13, C14, C18 |
| 3 | 10n | CAP_0603 | C4, C6, C15 |
| 3 | 1u | CAP_0603 | C16, C19, C21 |
| 2 | 10pF | CAP_0603 | C9, C10 |
| 2 | 20pF | CAP_0603 | C17, C20 |
| 2 | 220pF | CAP_0603 | C3, C8 |
| 2 | 51R | RES_0603 | R8, R9 |
| 2 | LED | LED0603 | D1, D2 |
| 2 | REFPOINT | REF_POINT_1MM | RP1, RP2 |
| 2 | TESTPOINT | TESTPOINT_1MM | TP1, TP2 |
| 1 | 0896BM15A0001 | BALUN_JOHANSON868 | BLN1 |
| 1 | 1.8pF | CAP_0402 | C2 |
| 1 | 10u | CAP_0603 | C12 |
| 1 | 12.0MHz | CRYSTAL_0503x4-4 | XTAL2 |
| 1 | 220R | RES_0603 | R1 |
| 1 | 27MHz | CRYSTAL_03225C4 | XTAL1 |
| 1 | 3.3pF | CAP_0603 | C5 |
| 1 | 5.6nH | IND_0402 | L1 |
| 1 | 56k | RES_0603 | R2 |
| 1 | ANT_PCB_MONO | ANT_MEANDER868_16MM | ANT1 |
| 1 | CC1101 | QFN20 | DD2 |
| 1 | CONN_3 | CONN_PLS-3 | XL2 |
| 1 | NCP583SQ | SOT23-5 | DA1 |
| 1 | STM32L151CXTX | LQFP48 | DD1 |
| 1 | ST_SWD | CONN_PLS-4 | XL1 |
| 1 | USB_A | USB_AM | XL3 |
Similar boards
- 2 layers45 × 79.5 mm

- 2 layers78.7 × 70 mm

- 2 layers24 × 72 mm

- 2 layers114 × 16 mm

- 2 layers112.3 × 60 mm

- 2 layers

Locket
Kreyl/Locket
Locket ptetending to be universal. Radio, RGB LED, vibro, beeper, slide switch, button, pill connector, accelerometer, 2xAAA
76 parts - 2 layers50 × 108 mm

- 2 layers93 × 35 mm

Questions
How big is the UsbHost PCB?
It measures 79 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UsbHost use?
41 parts, built around the CC1101RGP, 0896BM15A0001E and NCP583SQ28. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UsbHost KiCad files?
From the Kreyl/tindenet repository on GitHub, at the commit this page was made from: the board is UsbHost/UsbHost_hw/UsbHost.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the UsbHost design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.