

WaterDoor
WaterDoor controller
- Size
- 63 × 162 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 56
- Pads
- 421
- Tracks, vias
- 2,124, 183
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 23 Apr 2015
- Updated
- 2 May 2015
Overview
WaterDoor is an open-source printed circuit board by Kreyl, from the Kreyl/WaterDoor repository on GitHub. It is a 2-layer board of 63 × 162 mm with 87 parts on 56 nets, routed with 2,124 tracks and 183 vias.
It is built around the FT232RQ, ST1S10PHR and NCP583SQ28. Its parts include 21 resistors, 19 capacitors, 6 diodes, 1 transistor and 1 switch. It belongs with the STM32 boards of this library.
Main components
3FT232RQ
PQFN32USB to serial UART InterfaceFTDIUncategorisedST1S10PHR
SOIC-8-EP-25℃~+125℃ 1 1.5mA 2.5V~18V 3A 800mV~13.6V 900kHz~1.2MHz Adjustable Buck Buck Built-in Yes SOIC-8-EP DC-DC Converters ROHSSTMicroelectronicsDC-DC ConvertersNCP583SQ28
SC-82AB-40℃~+85℃@(Ta) 1 150mA 1uA 2.8V 250mV@(150mA) 6V Enable Fixed Positive SC-82AB Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | RJ11 | Connectors:RJ11_TJ6_6P6C | XL4, XL11, XL12, XL13, XL14, XL15, XL17, XL18, XL19, XL20, XL21, XL22, XL23, XL24, XL25, XL26 +4 |
| 11 | 1k | Resistors:RES_0603 | R6, R7, R9, R10, R13, R14, R15, R16, R17, R18, R19 |
| 7 | 0.1u | Capacitors:CAP_0603 | C1, C2, C4, C13, C14, C18, C20 |
| 6 | HOLE_METALLED | PCB:Hole3_5_out6mm | HOLE1, HOLE2, HOLE3, HOLE4, HOLE5, HOLE6 |
| 6 | LED | LEDs:Through-Hole-5mm | D1, D2, D3, D4, D5, D6 |
| 4 | 100R | Resistors:RES_0603 | R2, R4, R5, R21 |
| 4 | 10u | Capacitors:CAP_0805 | C3, C12, C19, C21 |
| 4 | 1u | Capacitors:CAP_0603 | C5, C6, C16, C22 |
| 2 | 10k | Resistors:RES_0603 | R3, R11 |
| 2 | 20pF | Capacitors:CAP_0603 | C23, C24 |
| 2 | 2k | Resistors:RES_0603 | R1, R12 |
| 1 | 100 | Resistors:RES_0603 | R20 |
| 1 | 1000u | Capacitors:CAP_10xxR | C7 |
| 1 | 10n | Capacitors:CAP_0603 | C15 |
| 1 | 10uH | Inductors:IND_SR0604 | L2 |
| 1 | 12.0MHz | Quartz:0503x4-4 | XTAL2 |
| 1 | 220R | Resistors:RES_0603 | R8 |
| 1 | BARREL_SOCKET | Connectors:Barrel | XL9 |
| 1 | CONN_2 | Connectors:SPRING_TERM_XY124V_A_2 | XL10 |
| 1 | CONN_3 | Connectors:PLS-3 | XL2 |
| 1 | CONN_4 | Connectors:PLS-4 | XL3 |
| 1 | FT232R | SO_DIL_TSSOP:SSOP28 | DD2 |
| 1 | IPS6041 | SO_DIL_TSSOP:SO8HEATSINK | DA1 |
| 1 | IRLMS9303 | SOT:SOT23-3 | Q3 |
| 1 | NCP583SQ | SOT:SOT23-5 | DA3 |
| 1 | ST1S10 | QFN_DFN:DFN8 | DA2 |
| 1 | STM32L151CXTX | LQFP_TQFP:LQFP48 | DD1 |
| 1 | ST_SWD | Connectors:PLS-4 | XL1 |
| 1 | SWITCH_H | BtnsSwitches:SW_SS9 | SW5 |
| 1 | USB_MICRO_B | Connectors:USBmicro_MOLEX_WM17142 | XL16 |
More from Kreyl/WaterDoor
1- 2 layers28 × 16.6 mm

Similar boards
- 2 layers89 × 50 mm

- 2 layers45 × 79.5 mm

- 2 layers78.7 × 70 mm

- 4 layers99.9 × 100 mm

Hermeslite
softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.
490 parts384 - 4 layers165 × 107 mm

- 4 layers120 × 80.6 mm

Stm32mp1-custom devboard
voloviq/stm32mp1-custom-devboard
Custom development board for stm32mp1-visionsom from Somlabs
195 parts7 - 2 layers113 × 56.3 mm

MP1Flight
TangoPush/MP1Flight
STM32MP1 based flight controller based off the Pixracer.
72 parts5CC0-1.0 - 2 layers65 × 56 mm

Questions
How big is the WaterDoor PCB?
It measures 63 × 162 mm and has 2 copper layers, 1.6 mm thick.
What parts does the WaterDoor use?
87 parts, built around the FT232RQ, ST1S10PHR and NCP583SQ28. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the WaterDoor KiCad files?
From the Kreyl/WaterDoor repository on GitHub, at the commit this page was made from: the board is WaterDoor_hw/WaterDoor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the WaterDoor design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kreyl before reusing the design.