
Pteron56v0
Kraken-Jokes/pteron-pcb
A continuation of FSund's pteron-keyboard project. Feel free to contribute, or use these files to make your own! Kits and PCBs are also available through my facebook page.

A continuation of FSund's pteron-keyboard project. Feel free to contribute, or use these files to make your own! Kits and PCBs are also available through my facebook page.
Pteron56v04-NN palm E is an open-source printed circuit board by Kraken-Jokes, from the Kraken-Jokes/pteron-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 301.4 × 194 mm with 141 parts on 93 nets, routed with 1,113 tracks and 5 vias.
Its parts include 59 switches, 58 diodes, 3 connectors, 2 resistors and 1 IC. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
FYI, things in this realm are untested and should be treated like fever dreams of a madman until they're moved elsewhere
| Qty | Value | Footprint | References |
|---|---|---|---|
| 58 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +42 |
| 58 | SW_PUSH | Keyboard parts:SW_MX_Millmax1,524 | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +42 |
| 14 | MountingHole_2.1mm | MountingHole:MountingHole_2.1mm | M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2, M2 |
| 2 | 5.1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5, R6 |
| 2 | LOGO | Logos:bat56 | G***, G*** |
| 2 | LOGO | Logos:PTERONsmaller | G***, G*** |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Female | Keyboard parts:USB_5POS_header | J2 |
| 1 | Rotary_Encoder_Switch | Keyboard parts:RotaryEncoder_EC11 | SW58 |
| 1 | USB_C_Receptacle_USB2.0 | Keyboard parts:GCT_USB4085-GF-A_REVA | J3 |
| 1 | nice_nano | Keyboard parts:nice_nano | U3 |

Kraken-Jokes/pteron-pcb
A continuation of FSund's pteron-keyboard project. Feel free to contribute, or use these files to make your own! Kits and PCBs are also available through my facebook page.


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

apoluekt/OpenRPNCalc
Open-source and open-hardware scientific RPN calculator

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer
/keyboard.kicad_pcb.jpg?size=s&soon)



It measures 301.4 × 194 mm and has 2 copper layers, 1.6 mm thick.
141 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Kraken-Jokes/pteron-pcb repository on GitHub, at the commit this page was made from: the board is KiCAD and GERBER/EXPERIMENTAL/Pteron56v04-NN-palm-E.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).