

Trivia Buzzers
- Size
- 59 × 67.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 42
- Pads
- 69
- Tracks, vias
- 85, 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 May 2025
- Updated
- 12 Jun 2025
Overview
MainBox is an open-source printed circuit board by KavEn06, from the KavEn06/Wireless-Trivia-Buzzers repository on GitHub, published under the MIT licence. It is a 2-layer board of 59 × 67.2 mm with 12 parts on 42 nets, routed with 85 tracks and 5 vias.
Its parts include 1 resistor and 1 IC.
README
README.mdWireless-Trivia-Buzzers
What is it?
There will be four buzzer boxes and one main box. Each buzzer box will represent a team (Teams A, B, C, and D) and will have four buttons, one for each player. The main box will house a screen that allows the host to see which player buzzed in first and will also include a reset button to clear all buzzes. For the time being, I plan to include two modes. The first mode allows only one player per team to buzz in, any player from the team can buzz, but only the first buzz from that team will register. The second mode is a free-for-all, where all 16 players can buzz in individually, regardless of their team.
Backstory
Basically this idea came to me while me and a couple of friends were practicing for a trivia competition that my school's Classics club hosts semi-annually (with other neighboring schools). I realised that many other schools didn't have the funds to buy the "official" buzzers that all the other schools use, which means that they just end up using some horrible online version, which are very dependent on how good your wifi is. Moreover, these buzzers we're SO HEAVY and annoying to set up that half the time my friends and I didn't even bother practicing because we were too lazy to set up the buzzers and get an actual competition environment going.
Architecture & Features
Hardware
- Display: 16x2 LCD With an I2C Module
- Chip: ESP32
- Audio:
- DAC: MAX98357A
- Speakers: 2W Speakers
- Power: 9V Battery or USB-C
Pictures
3D Model
Wiring Diagram
PCBs
Buzzer Box
Main Box
BOM
| Item | Purpose | Source | Price | Inventory |
|---|---|---|---|---|
| 5x ESP32 (38 Pin) Dev Board | Controller | Link | $32.10 | Owned |
| 16x2 LCD with I2C Module | Output | Link | $3.47 | Owned |
| Speakers | Output | Link | $2.99 | Owned |
| 5 LEDS | Output | Link | $0.50 | Owned |
| MAX98357A | Output | Link | $2.53 | Owned |
| 17x Push Buttons | Input | Link | $10.25 | Owned |
| 16x Charger Wires (Any work) | Input | Link | $14.43 | Owned |
| Micro SD Card Module | Input | Link | $1.28 | Highway Provided |
| 5x USB-C Port | Input | Link | $4.11 | Owned |
| 5x 9V Battery | Power | Link | $12.69 | Highway Provided |
| 5x 9V Battery Connector | Power | Link | $0.51 | Owned |
| 5x DC - DC Buck Converter | Power | Link | $4.65 | Highway Provided |
| 5x 3 Way (SPDT) Switch | Switch | Link | $0.41 | Highway Provided |
| 2.54mm Headers | Connector | Link | $0.84 | Highway Provided |
| Buzzer Box PCB (w/ Shipping) | PCB | JLCPCB | $10.00 | Highway Provided |
| Main Box PCB (w/ Shipping) | PCB | JLCPCB | $5.00 | Highway Provided |
| Total: | $105.76 | |||
| Total (Highway Provided): | $34.87 |
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Power | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | 5Vin1, 9Vin1 |
| 1 | 220R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9 |
| 1 | CSSCMOMIVG | MyComponents:Micro SD Card Module | SD_CARD1 |
| 1 | LRBCDIGASDGV | MyComponents:MAX98357A | MAX98357A1 |
| 1 | SCSDVG | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | LCD1 |
| 1 | SPDT | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | PoweSwitch1 |
| 1 | SPST | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | BuzzerB2 |
| 1 | ~ | ESP32:ESP32_38pin | U1 |
The 9 most common of 12 parts.
More from KavEn06/Wireless-Trivia-Buzzers
1- 2 layers59 × 67.2 mm

Similar boards
- 2 layers

Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT - 2 layers66.9 × 74.5 mm

- 2 layers40 × 15 mm

Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm

- 2 layers26 × 16.9 mm

- 2 layers49 × 25 mm

5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm

Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm

Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
How big is the MainBox PCB?
It measures 59 × 67.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MainBox use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MainBox KiCad files?
From the KavEn06/Wireless-Trivia-Buzzers repository on GitHub, at the commit this page was made from: the board is PCB/MainBox/MainBox.kicad_pcb and its schematic PCB/BuzzerBox/BuzzerBox.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MainBox design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).