

BuzzerBox
Trivia Buzzers
- Size
- 59 × 67.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 44
- Pads
- 80
- Tracks, vias
- 120, 6
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 May 2025
- Updated
- 12 Jun 2025
Overview
BuzzerBox is an open-source printed circuit board by KavEn06, from the KavEn06/Wireless-Trivia-Buzzers repository on GitHub, published under the MIT licence. It is a 2-layer board of 59 × 67.2 mm with 23 parts on 44 nets, routed with 120 tracks and 6 vias.
Its parts include 8 resistors and 1 IC.
README
README.mdWireless-Trivia-Buzzers
What is it?
There will be four buzzer boxes and one main box. Each buzzer box will represent a team (Teams A, B, C, and D) and will have four buttons, one for each player. The main box will house a screen that allows the host to see which player buzzed in first and will also include a reset button to clear all buzzes. For the time being, I plan to include two modes. The first mode allows only one player per team to buzz in, any player from the team can buzz, but only the first buzz from that team will register. The second mode is a free-for-all, where all 16 players can buzz in individually, regardless of their team.
Backstory
Basically this idea came to me while me and a couple of friends were practicing for a trivia competition that my school's Classics club hosts semi-annually (with other neighboring schools). I realised that many other schools didn't have the funds to buy the "official" buzzers that all the other schools use, which means that they just end up using some horrible online version, which are very dependent on how good your wifi is. Moreover, these buzzers we're SO HEAVY and annoying to set up that half the time my friends and I didn't even bother practicing because we were too lazy to set up the buzzers and get an actual competition environment going.
Architecture & Features
Hardware
- Display: 16x2 LCD With an I2C Module
- Chip: ESP32
- Audio:
- DAC: MAX98357A
- Speakers: 2W Speakers
- Power: 9V Battery or USB-C
Pictures
3D Model
Wiring Diagram
PCBs
Buzzer Box
Main Box
BOM
| Item | Purpose | Source | Price | Inventory |
|---|---|---|---|---|
| 5x ESP32 (38 Pin) Dev Board | Controller | Link | $32.10 | Owned |
| 16x2 LCD with I2C Module | Output | Link | $3.47 | Owned |
| Speakers | Output | Link | $2.99 | Owned |
| 5 LEDS | Output | Link | $0.50 | Owned |
| MAX98357A | Output | Link | $2.53 | Owned |
| 17x Push Buttons | Input | Link | $10.25 | Owned |
| 16x Charger Wires (Any work) | Input | Link | $14.43 | Owned |
| Micro SD Card Module | Input | Link | $1.28 | Highway Provided |
| 5x USB-C Port | Input | Link | $4.11 | Owned |
| 5x 9V Battery | Power | Link | $12.69 | Highway Provided |
| 5x 9V Battery Connector | Power | Link | $0.51 | Owned |
| 5x DC - DC Buck Converter | Power | Link | $4.65 | Highway Provided |
| 5x 3 Way (SPDT) Switch | Switch | Link | $0.41 | Highway Provided |
| 2.54mm Headers | Connector | Link | $0.84 | Highway Provided |
| Buzzer Box PCB (w/ Shipping) | PCB | JLCPCB | $10.00 | Highway Provided |
| Main Box PCB (w/ Shipping) | PCB | JLCPCB | $5.00 | Highway Provided |
| Total: | $105.76 | |||
| Total (Highway Provided): | $34.87 |
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 220R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7, R8 |
| 4 | SPST | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | BuzzerA1, BuzzerB1, BuzzerC1, BuzzerD1 |
| 4 | ~ | LED_THT:LED_D5.0mm | LEDA1, LEDB1, LEDC1, LEDD1 |
| 2 | Power | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | 5Vin1, 9Vin1 |
| 1 | SPDT | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | PoweSwitch1 |
| 1 | ~ | ESP32:ESP32_38pin | U1 |
The 20 most common of 23 parts.
More from KavEn06/Wireless-Trivia-Buzzers
1- 2 layers59 × 67.2 mm

Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the BuzzerBox PCB?
It measures 59 × 67.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BuzzerBox use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BuzzerBox KiCad files?
From the KavEn06/Wireless-Trivia-Buzzers repository on GitHub, at the commit this page was made from: the board is PCB/BuzzerBox/BuzzerBox.kicad_pcb and its schematic PCB/BuzzerBox/BuzzerBox.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BuzzerBox design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).