Skip to the content
2 layers132.7 × 73.3 mmRobal rpi ioBoard, the printed circuit board in 3D

Robal rpi ioBoard

KamilWuu/Robal-2.0
Size
132.7 × 73.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
117
Nets
111
Pads
434
Tracks, vias
651, 346
Pours
5
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
27 Jun 2024
Updated
4 Apr 2025

Overview

Robal rpi ioBoard is an open-source printed circuit board by KamilWuu, from the KamilWuu/Robal-2.0 repository on GitHub. It is a 2-layer board of 132.7 × 73.3 mm with 117 parts on 111 nets, routed with 651 tracks and 346 vias.

It is built around the PCA9685PW. Its parts include 53 resistors, 12 capacitors, 11 connectors, 2 diodes and 2 switches.

Main components

1

README

README.md

Robal-2.0

Parts

117
QtyValueFootprintReferences
32220Resistor_SMD:R_0603_1608MetricR10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R29, R30, R31, R32, R33 +16
1410KResistor_SMD:R_0603_1608MetricR1, R2, R3, R22, R23, R24, R46, R47, R48, R49, R50, R51, R52, R53
6>1mFCapacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-BC2, C5, C7, C9, C10, C13
6Conn_01x04_SocketConnector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_VerticalJ5, J6, J7, J8, J10, J11
6LOGOLOGOG***, G***, G***, G***, G***, G***
6TS_socketConnector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalTS_1, TS_2, TS_3, TS_4, TS_5, TS_6
4500Resistor_SMD:R_0603_1608MetricR21, R25, R26, R28
4>1mFCapacitor_SMD:CP_Elec_10x10.5C3, C6, C11, C12
4LEDLED_SMD:LED_0603_1608Metric3.3V1, 5V1, 6V_1, 6V_2
210uFCapacitor_SMD:C_0805_2012MetricC1, C4
22KResistor_SMD:R_0603_1608MetricR4, R27
2Conn_01x02_SocketConnector_AMASS:AMASS_XT30PW-F_1x02_P2.50mm_HorizontalJ2, J3
2Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1, JP2
2LEDLED_THT:LED_D5.0mmD2, D7
2PCA9685PWPackage_SO:TSSOP-28_4.4x9.7mm_P0.65mmPCA_1, PCA_2
2SPI_CONNConnector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_VerticalSPI_CONN0, SPI_CONN1
2SW_Omron_B3FSButton_Switch_THT:SW_PUSH_6mmSW1, SW2
11KResistor_SMD:R_0603_1608MetricR45
1BuzzerBuzzer_Beeper:Buzzer_12x9.5RM7.6BZ1
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1Conn_01x03_SocketConnector_AMASS:AMASS_MR30PW-FB_1x03_P3.50mm_HorizontalJ4
1Conn_02x03_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ9
1PCA_1_G1Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalPCA_1_G_CONN1
1PCA_1_G2Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalPCA_1_G_CONN2
1PCA_1_S1Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalPCA_1_S_CONN1
1PCA_1_S2Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalPCA_1_S_CONN2
1PCA_1_V1Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalPCA_1_V_CONN1
1PCA_1_V2Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalPCA_1_V_CONN2
1PCA_2_G1Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalPCA_2_G_CONN1
1PCA_2_G2Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalPCA_2_G_CONN2
1PCA_2_S1Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalPCA_2_S_CONN1
1PCA_2_S2Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalPCA_2_S_CONN2
1PCA_2_V1Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalPCA_2_V_CONN1
1PCA_2_V2Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalPCA_2_V_CONN2
1RASPBERRY_PI_4B_4GBRASPBERRY_PI_4B_4GB:MODULE_RASPBERRY_PI_4B_4GBU1
1~GY-87:GY-87GY-87

More from KamilWuu/Robal-2.0

1

Similar boards

  • 2 layers220 × 329.2 mmControl Boards, the printed circuit board in 3D

    Control Boards

    nasa-jpl/open-source-rover

    A build-it-yourself, 6-wheel rover based on the rovers on Mars!

    148 parts9.8kApache-2.0
  • 4 layers100.1 × 60.2 mmHades, the printed circuit board in 3D

    Hades

    pms67/HadesFCS

    Complete flight control system designed from scratch. Hardware designed with KiCad.

    215 parts1kBSD-3-Clause
  • 2 layers94 × 79 mm5 - Lizard Car, the printed circuit board in 3D

    5 - Lizard Car

    TRD-B/Lizard

    3D printed RC race car with custom electronics

    54 parts129CC-BY-4.0
  • 2 layers54.2 × 75.2 mmKiCAD Design, the printed circuit board in 3D

    KiCAD Design

    Brobiwann/ESP-spider

    The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…

    70 parts44
  • 2 layers130.6 × 112 mmSWN, the printed circuit board in 3D

    SWN

    4ms/SWN

    Spherical Wavetable Navigator source code

    614 parts43
  • 2 layers156.2 × 168.9 mmLPC176x MultiFunction, the printed circuit board in 3D

    LPC176x MultiFunction

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    236 parts24
  • 2 layersHB LC Dim6PWM CV, the printed circuit board in 3D

    HB LC Dim6PWM CV

    stan23/myPCBs

    Verschiedene Platinen für HomeMatic, AskSinPP und SmartHome

    57 parts21

Questions

How big is the Robal rpi ioBoard PCB?

It measures 132.7 × 73.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Robal rpi ioBoard use?

117 parts, built around the PCA9685PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Robal rpi ioBoard KiCad files?

From the KamilWuu/Robal-2.0 repository on GitHub, at the commit this page was made from: the board is electronics/robal_rpi_ioBoard/robal_rpi_ioBoard.kicad_pcb and its schematic electronics/robal_power_board/robal_power_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Robal rpi ioBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask KamilWuu before reusing the design.