
JK BMS CAN
dremeier/Arduino-JK-BMS-To-Pylontech-CAN-PCB
PCB and Case for the Arduino JK-BMS To Pylontech CAN converter

Stm32f072c8 mcu is an open-source printed circuit board by KabelitzJ, from the KabelitzJ/stm32f072c8_mcu repository on GitHub. It is a 4-layer board of 70 × 40 mm with 54 parts on 50 nets, routed with 498 tracks and 119 vias.
It is built around the 74AHC1G14GV, AP7384-33SA and USBLC6-2SC6. Its parts include 17 capacitors, 15 resistors, 7 ICs, 4 connectors and 2 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7, C8, C9, C11, C16, C17 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R6, R7, R14, R15 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C2, C3, C10, C14 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric | R8, R9, R10 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | Conn_01x14_Socket | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J3, J4 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 2 | ~ | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U6, U7 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 120R@100MHz | Resistor_SMD:R_0603_1608Metric | FB1 |
| 1 | 16MHz | custom:3225_smd_crystal | Y1 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 27 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 50 | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 74AHC1G14 | Package_TO_SOT_SMD:SOT-353_SC-70-5_Handsoldering | U1 |
| 1 | AP7384-33SA | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | APFA3010 | custom:2.8x3.5_LED_RGB | D1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_PLCC-2_3x2mm_KA | D2 |
| 1 | LOGO | custom:logo2 | G*** |
| 1 | STM32F072CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | ~ | custom:640-USB4215-03-A | U4 |

dremeier/Arduino-JK-BMS-To-Pylontech-CAN-PCB
PCB and Case for the Arduino JK-BMS To Pylontech CAN converter


Mr-Bossman/esp_hosted-board
To test ESP-Hosted-ng I designed this board to plug into and SD-card slot for easy testing.

greatscottgadgets/urti-mainboard
Mainboard of URTI, the Universal Radio Test Instrument

hnz1102/sdcdmux-emmc
SD CARD and eMMC Device Multiplexer with Infrared Remote Controller



sayanee/belle
:bell: door bell that will buzz on press and send a mobile notification with IFTTT
It measures 70 × 40 mm and has 4 copper layers, 1.6 mm thick.
54 parts, built around the 74AHC1G14GV, AP7384-33SA and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KabelitzJ/stm32f072c8_mcu repository on GitHub, at the commit this page was made from: the board is stm32f072c8_mcu.kicad_pcb and its schematic sheets/flash.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KabelitzJ before reusing the design.