2 layers229.9 × 111.8 mm
2 layers41 × 20 mm
Ft230xs usb2uart
KabelitzJ/ft230xs_usb2uart- Size
- 41 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 16
- Pads
- 64
- Tracks, vias
- 100, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Mar 2025
- Updated
- 20 Mar 2025
Overview
Ft230xs usb2uart is an open-source printed circuit board by KabelitzJ, from the KabelitzJ/ft230xs_usb2uart repository on GitHub. It is a 2-layer board of 41 × 20 mm with 21 parts on 16 nets, routed with 100 tracks and 16 vias.
It is built around the FT230XS-R. Its parts include 7 capacitors, 6 resistors, 2 connectors, 1 IC and 1 switch.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 270 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5 |
| 3 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | PWR, RX, TX |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 47p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | Conn_01x04_Socket | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J2 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U3 |
| 1 | FerriteBead | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | FB1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | USB_A | Connector_USB:USB_A_Molex_48037-2200_Horizontal | J1 |
Similar boards
- 2 layers203.2 × 149.9 mm
- 2 layers77.5 × 40.6 mm
Link adapter
jkominek/piano-conversion
Hardware, and some firmware, for acoustic piano to MIDI controller conversion.
42 parts53 - 4 layers62 × 42 mm
- 4 layers65 × 56 mm
Copilot Lite
BayLibre/Copilot
Manage a DUT power and serial through a single USB port, no additional software required.
80 parts22MIT - 2 layers48.2 × 49.3 mm
Nixie pipe
tuna-f1sh/nixiepipe-hardware
Hardware design files and firmware for my Nixie Pipe modules
49 parts19 - 2 layers120 × 98 mm
BioAmp v1.1.0
prototipado/bioamp
BioAmp is an opensource project of a multichannel biopotential adquisition system for EEG, EMG, EOG and EOG signals.
139 parts16 - 2 layers41 × 14 mm
96boards uart
96boards/96boards-uart
96Boards UART adapter hardware design files
31 parts13BSD-2-Clause
Questions
How big is the Ft230xs usb2uart PCB?
It measures 41 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ft230xs usb2uart use?
21 parts, built around the FT230XS-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ft230xs usb2uart KiCad files?
From the KabelitzJ/ft230xs_usb2uart repository on GitHub, at the commit this page was made from: the board is ft230xs_usb2uart.kicad_pcb and its schematic ft230xs_usb2uart.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ft230xs usb2uart design in my own project?
Its repository states no licence, so its author keeps all rights: ask KabelitzJ before reusing the design.