🔷 Title
ESP32 IoT Sensor PCB – Custom KiCad Design
🔷 Project Overview
This project involves designing a custom two-layer PCB for an IoT sensor node using the ESP32-WROOM-32 module. The PCB integrates power regulation, sensor interfacing, and proper RF layout practices for reliable wireless communication.
🔷 Features
ESP32-WROOM-32 WiFi + Bluetooth module
On-board 3.3V voltage regulation (AMS1117)
Sensor interface (DHT11 temperature sensor)
External I/O connector support
Ground plane for stable operation
RF antenna keep-out zone for improved signal performance
🔷 Schematic Description
The schematic includes:
ESP32 module connections
Power supply (5V → 3.3V regulator)
Decoupling capacitors
Sensor interface (DHT11 with pull-up resistor)
External connectors for expansion
🔷 PCB Layout Details
Two-layer PCB (Top & Bottom copper)
Ground plane implemented using copper pour
Proper routing of power and signal traces
Antenna keep-out zone defined to prevent signal interference
Compact and efficient component placement
🔷 Design Rules & Verification
ERC (Electrical Rule Check) completed
DRC (Design Rule Check) completed
Gerber files verified using Gerber Viewer
No critical errors found
🔷 Manufacturing Files
Gerber and drill files generated using KiCad:
Top Copper (F.Cu)
Bottom Copper (B.Cu)
Solder Mask (Top/Bottom)
Silkscreen (Top/Bottom)
Edge Cuts
Drill Files
🔷 Fabrication
The PCB can be manufactured using services like:
JLCPCB
PCBWay
Recommended settings:
Layers: 2
Thickness: 1.6 mm
Surface finish: HASL
🔷 Learning Outcomes
Schematic design using KiCad
PCB layout and routing
Ground plane implementation
RF design considerations (antenna keep-out)
Gerber file generation and verification
🔷 Conclusion
This project demonstrates end-to-end PCB design skills, including schematic capture, layout design, RF considerations, and manufacturing file generation. It highlights practical knowledge in embedded hardware and IoT system design