
OSO SWAT C1-rounded
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

A custom 4-layer PCB and Verilog game engine using the Digilent Cmod A7.
Retro KiCAD is an open-source printed circuit board by JuanAVillagomez, from the JuanAVillagomez/FPGA-Retro-Arcade-Console repository on GitHub. It is a 4-layer board of 70 × 77.5 mm with 36 parts on 70 nets, routed with 131 tracks and 6 vias.
Its parts include 4 connectors and 1 IC. It belongs with the retro computing and games and fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
A fully custom hardware and firmware implementation of a retro arcade game engine built from scratch. This project interfaces a Digilent Cmod A7 FPGA with a custom-designed printed circuit board (PCB) featuring a resistor-based VGA Digital-to-Analog Converter (DAC), isolated power delivery, and NES controller input logic.
This project bridges bare-metal hardware design with digital logic synthesis, entirely bypassing traditional microcontrollers in favor of hardware description logic.
The motherboard is a custom 4-layer mixed-signal PCB designed to route high-speed digital signals and manage power delivery safely via dedicated internal power and ground planes.
The entire game engine and display driver are synthesized in Verilog using Xilinx Vivado.
A significant portion of this project involved bridging the gap between digital simulation and physical realities:
PACKAGE_PIN assignments in the Vivado .xdc constraints file, demonstrating the rapid iteration power of FPGAs.| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 2k | Resistor_SMD:R_0805_2012Metric | 510, 510, 510, 510, 510, 510, 510, 510, 510, 510, 510, 510, 510, 510, 510 |
| 9 | 1k | Resistor_SMD:R_0805_2012Metric | 270, 270, 270, 270, 270, 270, 270, 270, 270 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | 1u |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | 4.7u |
| 1 | 694106301002 | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | DE15_Socket_HighDensity_MountingHoles | Connector_Dsub:DSUB-15-HD_Socket_Horizontal_P2.29x1.90mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm | J2 |
| 1 | LP2950-3.3_TO92 | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | NES_CABLE_WIRES | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | ~ | FPGA:DIP-48_600mil | A7-35T1 |

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch




rjwalters/kicad-tools
Standalone Python tools for parsing and manipulating KiCad schematic and PCB files

mbtaylor1982/ReSDMAC
Verilog code to replace the Commodore SDMAC found in the A3000


dmkfasi/nus-cpu
This tends to re-create Nintendo 64 schematics and lay out a board suitable for portable version
It measures 70 × 77.5 mm and has 4 copper layers, 1.6 mm thick.
36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JuanAVillagomez/FPGA-Retro-Arcade-Console repository on GitHub, at the commit this page was made from: the board is hardware/Retro_KiCAD.kicad_pcb and its schematic hardware/Retro_KiCAD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JuanAVillagomez before reusing the design.