Skip to the content
2 layers25.4 × 25.4 mmAdafruit I2C QT Rotary Encoder, the printed circuit board in 3D

Adafruit I2C QT Rotary Encoder

Jossey28/keeby

Generated by this awesome dev is this awesome keyboard, with this accesory keypad which is pretty much all I'm looking for design-wise. I like the colors.

Size
25.4 × 25.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
20
Pads
104
Tracks, vias
248, 25
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
7 Jun 2026
Updated
8 Jul 2026

Overview

Adafruit I2C QT Rotary Encoder is an open-source printed circuit board by Jossey28, from the Jossey28/keeby repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 25.4 × 25.4 mm with 33 parts on 20 nets, routed with 248 tracks and 25 vias.

It is built around the ATSAMD09D14A-MU, AP2112K-3.3 and BSS138. Its parts include 4 resistors, 3 capacitors, 3 diodes, 2 ICs and 1 transistor. It belongs with the SAM D and SAM boards of this library.

Main components

3

README

README.md

Keeby

A YSWS project for keyboard design and creation.


The Keyboard I'm going for

Generated by this awesome dev is this awesome keyboard, with this accesory keypad which is pretty much all I'm looking for design-wise. I like the colors.

A 75% Mechanical Keyboard with silent tactiie switches designed like this with preferability wireless capabilities.

After attending Nexus I for sure want to try out some red switches

In addition, it'd have a numpad that it connects to via a short type-c cable and very clicky switches.

What I'm working with

The Hardware

14 cols x 6 rows = 84 possible keys

14 cols + 6 rows = 20 gpio pins needed for the keyboard

I2C (2 pins) will have:

  • 2 rotary encoders
  • a display

Parts:

A 0.91 inch display

2 rotary encoders

Batch of red switches

The Software

Status

Currenly working on getting the PCB built

Parts

33
QtyValueFootprintReferences
4MOUNTINGHOLE2.5MOUNTINGHOLE_2.5_PLATEDU$25, U$27, U$29, U$30
3SOLDERJUMPER_ARROW_NOPASTESJ1, SJ8, SJ9
310K0603-NOR1, R2, R7
3TPTP15RTP15R_385TP1, TP2, TP3
2STEMMAQTU$34, U$35
210uF0805-NOC2, C3
2FIDUCIAL_1MMFIDUCIAL_1MMFID3, FID4
2STEMMA_I2C_QTJST_SH4CONN3, CONN4
1PEC11+SWITCHSW1
11X06_ROUND_70JP2
1PCBFEAT-REV-040U$33
1ADAFRUIT_3.5MMU$32
10.1uF0603-NOC4
110KRESPACK_4X0603R6
1AP2112K-3.3SOT23-5U1
1ATSAMD09D14A-MUQFN24_4MMIC1
1BSS138SOT363Q2
1GREENCHIPLED_0603_NOOUTLINED1
1WS2812B_SK6812ENEO3535_REVERSELED1
1redCHIPLED_0603_NOOUTLINED2

Similar boards

  • 8 layers245 × 129 mmSquishy main panel, the printed circuit board in 3D

    Squishy main panel

    esden/squishy-hardware

    Squishy hardware design files

    1,155 parts1CERN-OHL-S-2.0
  • 4 layers67 × 54 mmATSAMD 00, the printed circuit board in 3D

    ATSAMD 00

    probe-rs/hive

    A Raspberry PI shield for testing probe-rs against many chips & probes.

    66 parts15
  • 6 layers85 × 90 mmSquishy, the printed circuit board in 3D

    Squishy

    kitspace-test-repos/kicad6-file-collection

    193 partsMIT
  • 2 layers22.3 × 56 mmHeads v4, the printed circuit board in 3D

    Heads v4

    minor-industries/hardware

    Minor Industries' PCBs

    27 parts
  • 4 layers74 × 104 mmBeepy, the printed circuit board in 3D

    Beepy

    sqfmi/beepy-hardware

    Beepy Hardware

    160 parts348MIT
  • 4 layers70 × 54 mmPicoLab, the printed circuit board in 3D

    PicoLab

    CoretechR/PicoLab

    Web-GUI Embedded Multitool

    285 parts327GPL-3.0
  • 2 layers390 × 120.2 mmKeyboard, the printed circuit board in 3D

    Keyboard

    joshajohnson/entropy

    Strange keyboard with a left hand numpad

    334 parts97

Questions

How big is the Adafruit I2C QT Rotary Encoder PCB?

It measures 25.4 × 25.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Adafruit I2C QT Rotary Encoder use?

33 parts, built around the ATSAMD09D14A-MU, AP2112K-3.3 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Adafruit I2C QT Rotary Encoder KiCad files?

From the Jossey28/keeby repository on GitHub, at the commit this page was made from: the board is libs/Adafruit I2C QT Rotary Encoder/proj/Adafruit I2C QT Rotary Encoder.kicad_pcb and its schematic keyboard_pcb/keyboard_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Adafruit I2C QT Rotary Encoder design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).