Skip to the content
2 layers100 × 60 mmAmigaPad, the printed circuit board in 3D

Clone of the Amiga CD32 Joypad circuit

Size
100 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
23
Pads
137
Tracks, vias
316, 28
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 May 2026
Updated
19 May 2026

Overview

AmigaPad is an open-source printed circuit board by JensRestemeier, from the JensRestemeier/AmigaPad repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 60 mm with 29 parts on 23 nets, routed with 316 tracks and 28 vias.

It is built around the 74LS125DC and 74LS165PC. Its parts include 14 switches, 5 capacitors, 4 resistors, 2 ICs and 2 connectors. It belongs with the retro computing and games boards of this library.

Main components

2

README

README.md

AmigaPad

This is a copy of the schematic for the CD32 joypad from https://www.mrdictionary.net/PSCD32/diary/sites/CD32Gamepad_gerdkautzmann_de.html in KiCad, which is based on reverse engineered hardware. I made a small PCB, which is mostly for testing and development work. So far I had no time to make a case for it.

Photo of a populated PCB

I don't know what kind of Ferrite Bead the original Joypad uses, so I just put in a bridge. There is a choice of populating vertical buttons for the shoulder buttons, or plain horizontal buttons on the component side. The button above the start button has no function in a normal Amiga software.

Photo of joystick mode in Amiga Test Kit

Classic Amiga software will see the directions, "red" as fire and "blue" as PotY.

Photo of CD32 mode in Amiga Test Kit

CD32-compatible software will see the directions, four face buttons, two shoulder buttons and a start button.

You can preview the KiCad project on KiCanvas.

Parts

29
QtyValueFootprintReferences
2100nFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC3, C5
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R3
1100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR5
110kResistor_THT:R_Array_SIP9RN1
1220Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1220pFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC4
147uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2
174LS125Package_DIP:DIP-14_W7.62mmU2
174LS165Package_DIP:DIP-16_W7.62mmU1
1820pFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1
1BlueButton_Switch_THT:SW_PUSH_6mm_H5mmSW8
1BreakoutConnector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_VerticalJ2
1DebugButton_Switch_THT:SW_PUSH_6mm_H5mmSW12
1DownButton_Switch_THT:SW_PUSH_6mm_H5mmSW2
1FerriteBead_SmallInductor_THT:L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1FB1
1GreenButton_Switch_THT:SW_PUSH_6mm_H5mmSW5
1JoystickConnector_Dsub:DSUB-9_Socket_EdgeMount_P2.77mmJ1
1LSButton_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFSSW13
1LSButton_Switch_THT:SW_PUSH_6mm_H5mmSW9
1LeftButton_Switch_THT:SW_PUSH_6mm_H5mmSW3
1PauseButton_Switch_THT:SW_PUSH_6mm_H5mmSW11
1RSButton_Switch_THT:SW_PUSH_6mm_H5mmSW10
1RSButton_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFSSW14
1RedButton_Switch_THT:SW_PUSH_6mm_H5mmSW7
1RightButton_Switch_THT:SW_PUSH_6mm_H5mmSW4
1UpButton_Switch_THT:SW_PUSH_6mm_H5mmSW1
1YellowButton_Switch_THT:SW_PUSH_6mm_H5mmSW6

Similar boards

  • 2 layers128.3 × 50.8 mmCD32 Controller, the printed circuit board in 3D

    CD32 Controller

    BleuLlama/AmigaSchematics

    Schematics of various Commodore Amiga related items

    33 parts58MIT
  • 2 layers129.3 × 40.3 mmCD32 pad, the printed circuit board in 3D

    CD32 pad

    CRG-Glen/CD32-to-A500-gamepad

    Replacement CD32 compatible PCB for The A500 gamepad

    27 parts7CERN-OHL-P-2.0
  • 2 layers155.1 × 156 mmCP297s, the printed circuit board in 3D

    CP297s

    Danjovic/CP297s

    ZX97 lite board for CP200s case

    128 parts4GPL-3.0
  • 2 layers301.5 × 367.3 mmOSI 600D Superboard II Cherry Solder Mask, the printed circuit board in 3D

    OSI 600D Superboard II Cherry Solder Mask

    Bambelweeny57/OSI-600D-SuperBoard-II

    KiCad 10 recreation of the Ohio Scientific Superboard II Model 600 rev D (1980) with Cherry MX keyswitches, 27C16/2816 ROMs, full schematic and assembly guide.

    314 parts
  • 2 layers379.1 × 273.4 mmNE Delta, the printed circuit board in 3D

    NE Delta

    frubem/NE_Delta_Schematics

    Forked from https://codeberg.org/hkzlab/NE_Delta_Schematics

    185 parts
  • 2 layers58.4 × 38.1 mmAmiga CD32, the printed circuit board in 3D

    Amiga CD32

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    30 parts27
  • 4 layers101.6 × 53.3 mmRC208-68000 BOOTROM RAM 2, the printed circuit board in 3D

    RC208-68000 BOOTROM RAM 2

    MarkD833/RCBUS-68xxx

    My Motorola 68000 & 68302 processors (+ SIO, PIO & MFP boards) for the RCBus ecosystem.

    22 parts8GPL-3.0
  • 2 layers100 × 100 mmExternal drive board, the printed circuit board in 3D

    External drive board

    MEGA65/mega65-r3-expansion-board

    Expansion board for the MEGA65 R3+ Main Boards

    34 parts8

Questions

How big is the AmigaPad PCB?

It measures 100 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AmigaPad use?

29 parts, built around the 74LS125DC and 74LS165PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AmigaPad KiCad files?

From the JensRestemeier/AmigaPad repository on GitHub, at the commit this page was made from: the board is KiCad/AmigaPad.kicad_pcb and its schematic KiCad/AmigaPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AmigaPad design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).