Skip to the content
2 layers107.5 × 87 mmWs2811controller panels, the printed circuit board in 3D

Ws2811controller panels

Jeija/ESP8266-WS2811-LEDs33

ESP8266 driver for WS2811 LED Strips

Size
107.5 × 87 mm
Copper layers
2
Thickness
1.6 mm
Parts
96
Nets
8
Pads
336
Tracks, vias
852, 0
Routed
Yes
KiCad
KiCad 4
Created
24 Jan 2016
Updated
27 Nov 2016

Overview

Ws2811controller panels is an open-source printed circuit board by Jeija, from the Jeija/ESP8266-WS2811-LEDs repository on GitHub. It is a 2-layer board of 107.5 × 87 mm with 96 parts on 8 nets, routed with 852 tracks and 0 vias.

Its parts include 48 connectors, 24 ICs, 12 capacitors and 12 resistors.

README

hardware/README.md

Hardware Design

Notes

The Hardware design uses the prebuilt ESP-03 modules for quicker assembly and cost-effectiveness. Since the hardware module is designed to fit into the "Voltek SPEC7188B" and is supposed to be used with a single layer PCB, you will have to solder a connection from the resistor on the top left to CH_PD manually. I also recommend to solder a wire with a length of 12.5cm to the antenna pin of the ESP-03 as a WiFi aerial for better signal reception.

Attribution

Parts

96
QtyValueFootprintReferences
1210KResistors_SMD:R_1206_HandSolderingR1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1
1222uCapacitors_SMD:C_1206_HandSolderingC1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1
12DEBUG_HDRWS2811 Controller:5pin_SMDP5, P5, P5, P5, P5, P5, P5, P5, P5, P5, P5, P5
12ESP-03WS2811 Controller:esp-03U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2, U2
12LF33TO_SOT_Packages_SMD:TO-252-2LeadU1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1
12PSU_5VWS2811 Controller:SolderPadP3, P3, P3, P3, P3, P3, P3, P3, P3, P3, P3, P3
12PSU_ENWS2811 Controller:SolderPadP2, P2, P2, P2, P2, P2, P2, P2, P2, P2, P2, P2
12PSU_GNDWS2811 Controller:SolderPadP1, P1, P1, P1, P1, P1, P1, P1, P1, P1, P1, P1

Similar boards

  • 2 layers101.8 × 57.8 mmSc64v2, the printed circuit board in 3D

    Sc64v2

    Polprzewodnikowy/SummerCart64

    SummerCart64 - a fully open source N64 flashcart

    96 parts1.2kGPL-3.0
  • 2 layers55 × 80 mmBoard esp32, the printed circuit board in 3D

    Board esp32

    sudomesh/disaster-radio

    A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

    96 parts1.1k
  • 2 layers100.5 × 218.3 mmTraktorino, the printed circuit board in 3D

    Traktorino

    silveirago/traktorino

    The open-source DIY MIDI Controller for DJs.

    96 parts220
  • 2 layers255.9 × 99.3 mmZerosprey42, the printed circuit board in 3D

    Zerosprey42

    beekeeb/zerosprey42

    Zerosprey42 Keyboard is a wired, beginner friendly, choc hotswap, MonoBlockSplit (Unibody), column-staggered, DIY mechanical keyboard.

    96 parts140
  • 2 layers92.8 × 71.8 mmUSBSID Pico v1.0, the printed circuit board in 3D

    USBSID Pico v1.0

    LouDnl/USBSID-Pico

    USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller

    96 parts125GPL-2.0
  • 2 layers138.4 × 91.4 mmSTM32 MegaBlaster, the printed circuit board in 3D

    STM32 MegaBlaster

    AidanHockey5/STM32_VGM_Player_YM2612_SN76489

    A Sega Genesis music player based off of the STM32 BluePill board and real YM2612+SN76489 sound chips.

    96 parts117AGPL-3.0
  • 2 layers75.1 × 66.8 mmFroggyswadge, the printed circuit board in 3D

    Froggyswadge

    cnlohr/cnhardware

    My dumping grounds for all my kicad projects and random hardware bringup.

    96 parts114
  • 2 layers85 × 56 mmHB RF ETH, the printed circuit board in 3D

    HB RF ETH

    alexreinert/PCB

    Some of my PCBs

    96 parts104

Questions

How big is the Ws2811controller panels PCB?

It measures 107.5 × 87 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ws2811controller panels use?

96 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ws2811controller panels KiCad files?

From the Jeija/ESP8266-WS2811-LEDs repository on GitHub, at the commit this page was made from: the board is hardware/ws2811controller_panels.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ws2811controller panels design in my own project?

Its repository states no licence, so its author keeps all rights: ask Jeija before reusing the design.