Skip to the content
2 layers53.1 × 36.3 mmAntispark, the printed circuit board in 3D

This HW does not work, please don't use it as is!

Size
53.1 × 36.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
19
Pads
74
Tracks, vias
97, 512
Pours
8
Routed
Yes
KiCad
KiCad 5 (file 20170123)
Created
26 Feb 2019
Updated
26 Feb 2019

Overview

Antispark is an open-source printed circuit board by Jana-Marie, from the Jana-Marie/otterprotect repository on GitHub. It is a 2-layer board of 53.1 × 36.3 mm with 32 parts on 19 nets, routed with 97 tracks and 512 vias.

It is built around the LM5060MM and IRFS7734TRL7PP. Its parts include 9 resistors, 4 connectors, 3 capacitors, 3 ICs and 3 diodes.

Main components

2

README

README.md

otterprotect

Parts

32
QtyValueFootprintReferences
410kOhmResistors_SMD:R_1206R1, R9, R10, R11
2100nF 100VCapacitors_SMD:C_0805C2, C3
210kOhmResistors_SMD:R_0603Ro1, Rsns1
2GNDcrf1:1PAD_6x5mmP1GND1, P2GND1
2IRFS7734TRL7PPcrf1:D2PAK-7-GDSU10, U11
10.27OhmResistors_SMD:R_1206R12
1100OhmResistors_SMD:R_1206Rin1
11MOhmResistors_SMD:R_0603R8
11MOhmResistors_SMD:R_1206R3
1315kOhmResistors_SMD:R_0603R2
1500kohmResistors_SMD:R_0603R7
168nF 16VCapacitors_SMD:C_0603C1
1ErrorLEDs:LED_0603D2
1Fusecrf1:CarfuseMaxiF1
1Jumpercrf1:smdJumper1x2JP1
1LM5060Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mmU1
1LOGOotter:otter1G***
1OutputLEDs:LED_0603D4
1POT_TRIMPotentiometers:Potentiometer_Trimmer_Bourns_3266PRV2
1PowerLEDs:LED_0603D3
1VBATcrf1:1PAD_6x5mmP1VBAT1
1VOUTcrf1:1PAD_6x5mmP2VBAT1
1VaristorVaristors:RV_Disc_D21.5_W6.3_P10RV1

The 30 most common of 32 parts.

Similar boards

  • 2 layers37.5 × 45 mmDianome, the printed circuit board in 3D

    Dianome

    motionlayer/Dianome

    Docs, Schematic and Board file for the Dianome PDB

    49 parts10CERN-OHL-W-2.0
  • 4 layers89.8 × 64 mmStinger V2.0, the printed circuit board in 3D

    Stinger V2.0

    Project-Stinger/Electronics

    Electronics for Stinger foam dart blasters

    126 parts4
  • 2 layers45 × 45 mmESwitch, the printed circuit board in 3D

    ESwitch

    snalvc/ESwitch

    A high-side N-MOSFET electrical switch module

    23 parts2MIT
  • 4 layers210 × 100 mmPower distributor, the printed circuit board in 3D

    Power distributor

    zeabusTeam/power_management

    Power management module for Zeabus AUV

    199 parts
  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    32 parts1kGPL-3.0
  • 2 layers136.8 × 54.2 mmRetropie zero, the printed circuit board in 3D

    Retropie zero

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    32 parts915
  • 2 layersMooltipass top, the printed circuit board in 3D

    Mooltipass top

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    32 parts531
  • 2 layers16 × 20 mmESPKey, the printed circuit board in 3D

    ESPKey

    octosavvi/ESPKey

    Wiegand data logger, replay device and micro door-controller

    32 parts353GPL-2.0

Questions

How big is the Antispark PCB?

It measures 53.1 × 36.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Antispark use?

32 parts, built around the LM5060MM and IRFS7734TRL7PP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Antispark KiCad files?

From the Jana-Marie/otterprotect repository on GitHub, at the commit this page was made from: the board is antispark.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Antispark design in my own project?

Its repository states no licence, so its author keeps all rights: ask Jana-Marie before reusing the design.