
Power Distributor
Pongkemon01/Zeabus-Elec-Circuit-Power_dist
Power Distributor for Zeabus 2017

Power management module for Zeabus AUV
Power distributor is an open-source printed circuit board by zeabusTeam, from the zeabusTeam/power_management repository on GitHub. It is a 4-layer board of 210 × 100 mm with 199 parts on 128 nets, routed with 846 tracks and 566 vias.
It is built around the I6A4W020A033V-001-R, TMR 6-2415WI and UEI30-050-Q12P-C, with the DA-T263-101E-TR, LM5060MM and FT230XS-R among its other parts. Its parts include 62 resistors, 60 capacitors, 27 diodes, 19 connectors and 17 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | AMASS XT60 | Connector_AMASS:AMASS_XT60-F_1x02_P7.20mm_Vertical | J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16, J17, J18 |
| 13 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R14, R15, R26, R42, R47, R48, R49, R54, R55, R56, R61, R62 |
| 11 | 220uF | Capacitor_SMD:CP_Elec_10x10 | C31, C32, C33, C34, C37, C38, C39, C42, C54, C57, C60 |
| 9 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C35, C40, C41, C45, C48, C51, C52, C55, C58 |
| 8 | 1000pF,3kV | Capacitor_SMD:C_1812_4532Metric_Pad1.30x3.40mm_HandSolder | C7, C8, C9, C10, C20, C21, C28, C29 |
| 8 | 100uF | Capacitor_SMD:CP_Elec_8x10 | C1, C2, C15, C16, C17, C24, C25, C30 |
| 8 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C5, C6, C13, C14, C19, C23, C26, C27 |
| 8 | 3.3k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6, R36, R37, R38, R39, R40, R41 |
| 7 | 200 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R27, R28, R29, R30, R31, R32, R33 |
| 7 | SMBJ26A | Diode_SMD:D_SMB_Handsoldering | D9, D10, D11, D16, D21, D24, D27 |
| 6 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12, R20, R21, R45, R52, R59 |
| 6 | SMAJ17CA | Diode_SMD:D_SMA_Handsoldering | D7, D12, D13, D19, D22, D25 |
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11, C12, C22, C49, C50 |
| 4 | 0 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R16, R17, R18, R19 |
| 4 | 1.27k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R44, R51, R58 |
| 4 | 150nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C36, C53, C56, C59 |
| 4 | 160 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10, R43, R50, R57 |
| 4 | 8.66k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13, R46, R53, R60 |
| 4 | AUIRFS8409-7P | zeabus:D2PAK-7 | Q1, Q4, Q5, Q6 |
| 4 | LM5060 | Package_SO:MSOP-10_3x3mm_P0.5mm | U7, U15, U16, U17 |
| 4 | Thruster_ON | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8, D20, D23, D26 |
| 3 | 22uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C3, C4, C18 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R35 |
| 2 | 2.4k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R8 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R23, R24 |
| 2 | 3.6k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | 47pF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C44, C46 |
| 2 | DA-T263-101E | zeabus:HeatSink-DA-T263-101E | HS1, HS2 |
| 2 | LM5050-1 | Package_TO_SOT_SMD:TSOT-23-6 | U8, U9 |
| 2 | PS2801C-4 | Package_SO:SOP-16_4.4x10.4mm_P1.27mm | U13, U14 |
| 2 | SS16T3G | Diode_SMD:D_SMA_Handsoldering | D14, D15 |
| 2 | UWE-12-10-Q12PB-C | zeabus:UWE-xxxx | U1, U2 |
| 2 | i6A4W020A033V-001-R | zeabus:I6A | U5, U6 |
| 1 | 0.01uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C43 |
| 1 | 10uH,1A | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 12V_On_1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 12V_On_2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R34 |
| 1 | 24V_On | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R25 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C47 |
| 1 | 5.6k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R22 |
| 1 | 5V_On | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | 7.5k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | 74AHC595D | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U12 |
| 1 | 8.4V On_1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 1 | 8.4V On_2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U10 |
| 1 | Ferrite 600R 2A | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2 |
| 1 | IPB009N03LG | zeabus:D2PAK-7 | Q2 |
| 1 | IPB009N03L_G | zeabus:D2PAK-7 | Q3 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U11 |
| 1 | Main On | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D17 |
| 1 | Opto_AUX | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | TMR_6-2415WI | Converter_DCDC:Converter_DCDC_TRACO_TMR-xxxx_THT | U4 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | UEI30-050-Q12P-C | zeabus:UEI30 | U3 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J19 |
| 1 | USB_On | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D18 |
The 195 most common of 199 parts.

Pongkemon01/Zeabus-Elec-Circuit-Power_dist
Power Distributor for Zeabus 2017

fabMSTICLig/RobAIR
Les différentes partie de ce projet sont mise à disposition selon les termes de la Licence Creative Commons Attribution - Pas d’Utilisation Commerciale - Partage dans les Mêmes Conditions 3.0 France .

FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board


motionlayer/Dianome
Docs, Schematic and Board file for the Dianome PDB



Roboy/myo_shield
devel - a shield for the de10-nano-soc making the cableing greater again
It measures 210 × 100 mm and has 4 copper layers, 1.6 mm thick.
199 parts, built around the I6A4W020A033V-001-R, TMR 6-2415WI, UEI30-050-Q12P-C and DA-T263-101E-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the zeabusTeam/power_management repository on GitHub, at the commit this page was made from: the board is circuit/power_distributor.kicad_pcb and its schematic circuit/battery_oring.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask zeabusTeam before reusing the design.