Skip to the content
2 layers56.1 × 35.8 mmLensmount v1, the printed circuit board in 3D

Hard- and Firmware to control different EF and EF-S lenses

Size
56.1 × 35.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
35
Nets
31
Pads
118
Tracks, vias
441, 76
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Oct 2020
Updated
8 Apr 2025

Overview

Lensmount v1 is an open-source printed circuit board by Jana-Marie, from the Jana-Marie/EF-S-Adapter repository on GitHub, published under the MIT licence. It is a 2-layer board of 56.1 × 35.8 mm with 35 parts on 31 nets, routed with 441 tracks and 76 vias.

It is built around the USBLC6-4. Its parts include 11 connectors, 9 resistors, 7 capacitors, 3 ICs and 3 transistors. It belongs with the STM32 boards of this library.

Main components

1

README

README.md

EF-S-Adapter

Hard- and Firmware to control EF/EF-S lenses. The protocol used has grown since the first generation of EF(-S) lenses hence is a bit extensive with different layers of compatibility. On the physical layer a SPI like interface is used with I2S alike clock-stretching.

Please use at your own risk, the hard- and firmware are experimental and can damage your lens!

Status

v1
  • Tested
  • May shorts power rails on lens attachment
v1.1
  • Tested

Todo

  • Make lens hotplugable (needs new hardware revision)
  • Create helper functions (like set_aperture_to(aperture))
  • Documentation

Thanks

Thanks to Jean for this blogpost!

Parts

35
QtyValueFootprintReferences
95k1otter:R_0402R1, R2, R3, R4, R5, R6, R7, R8, R9
41uotter:C_0603C3, C4, C6, C7
3100notter:C_0402C1, C2, C5
32N7002Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3
2AGNDotter:PH-MVF-5365J2, J3
1DCLKotter:PH-MVF-5365J7
1DGNDotter:PH-MVF-5365J8
1DINotter:PH-MVF-5365J6
1DNPDiode_SMD:D_SOD-323FD1
1DOUTotter:PH-MVF-5365J5
1LOGOotter:canon_lensG***
1Picoblade DNPConnector_Molex:Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_VerticalJ10
1STM32F042F6PxPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU1
1TC2030-CTX-Tag-Connectotter:TC2030P1
1USBotter:USB-C 16PinJ9
1USBLC6-4Package_TO_SOT_SMD:SOT-23-6U3
1VBATotter:PH-MVF-5365J1
1VDDotter:PH-MVF-5365J4
1XC6206PxxxMRPackage_TO_SOT_SMD:SOT-23U2

Similar boards

  • 2 layers43.2 × 17.6 mmOtterPill, the printed circuit board in 3D

    OtterPill

    Jana-Marie/OtterPill

    stm32f072 dev board with arduino nano alike pinout

    37 parts162
  • 4 layers95 × 95 mmOpenmicro, the printed circuit board in 3D

    Openmicro

    conol-ai/openmicrokbd

    Open-source recreation of OpenAI's Codex Micro macropad — PCB written in CoHDL, an AI-native hardware description language. Rust firmware (embassy) + companion app (makepad). MIT licensed. https://openmicrokbd.org

    88 parts154MIT
  • 4 layers197 × 71 mmArduino ads129x, the printed circuit board in 3D

    Arduino ads129x

    OpenElectronicsLab/OpenHardwareExG

    The OpenHardwareExG is a platform for ECG, EEG, EMG, ENG, EOG, and evoked potential applications. http://openelectronicslab.github.io/OpenHardwareExG/

    279 parts102
  • 4 layers58 × 18 mmUpm, the printed circuit board in 3D

    Upm

    jonasblixt/upm

    USB Power monitor

    72 parts46
  • 2 layers128 × 77 mmScale, the printed circuit board in 3D

    Scale

    Jana-Marie/lab-balance

    https://twitter.com/_Jana_Marie/status/1270040286710968321

    59 parts34
  • 4 layers220 × 120 mmElectricui arena, the printed circuit board in 3D

    Electricui arena

    electricui/electricui-arena

    Hardware for continuous integration testing of serial interfaces and microcontrollers

    268 parts27MIT
  • 2 layers91.3 × 53.3 mmTimep, the printed circuit board in 3D

    Timep

    Matir/timep

    Test Interface for Multiple Embedded Protocols

    89 parts25Apache-2.0
  • 4 layers110 × 46 mmJiffy, the printed circuit board in 3D

    Jiffy

    jonasblixt/jiffy

    IMX6UL Development board

    199 parts24

Questions

How big is the Lensmount v1 PCB?

It measures 56.1 × 35.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lensmount v1 use?

35 parts, built around the USBLC6-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lensmount v1 KiCad files?

From the Jana-Marie/EF-S-Adapter repository on GitHub, at the commit this page was made from: the board is hardware/v1/lensmount-v1.kicad_pcb and its schematic hardware/v1.1/lensmount-v1.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lensmount v1 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).