
Gaggimate
dulerabbit/GaggiBre-legacy
This is GaggiBre! a fork of Gaggimate with Manual Brew Control and Adaptive Mode. Made by Dule Rabbit

Presence sensor build with LD2410 24GHz mmWave sensor using ESPhome
ESPresence is an open-source printed circuit board by JamieKaiRemkes, from the JamieKaiRemkes/ESPresence repository on GitHub. It is a 2-layer board of 40.6 × 50.8 mm with 5 parts on 20 nets, routed with 5 tracks and 0 vias.
It is built around the HLK-10M05 and WS2812B. Its parts include 2 ICs, 1 diode and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.

dulerabbit/GaggiBre-legacy
This is GaggiBre! a fork of Gaggimate with Manual Brew Control and Adaptive Mode. Made by Dule Rabbit

AlterMundi-MonitoreoyControl/Proyecto-Incubadora
Is an innovative project aimed at enhancing the efficiency and productivity of poultry incubators in family farming.


X-zeed/UTAC-PCB
4-channel smart relay control board with ESP32-C3 SuperMini - KiCad PCB Design v0.2.0

ashloverscn/4ch-relay-1fan-arduino-nano-pcb
4ch-relay-1fan-arduino-nano-pcb

ashloverscn/4ch-spdt-relay-1fan-arduino-nano-pcb
4ch-spdt-relay-1fan-arduino-nano-pcb


souptik-samanta/LazyController
I made this so my lazyaahh doesnt have to walk upto switches
It measures 40.6 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the HLK-10M05 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JamieKaiRemkes/ESPresence repository on GitHub, at the commit this page was made from: the board is ESPresence.kicad_pcb and its schematic ESPresence.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JamieKaiRemkes before reusing the design.