

ESP32 4 layer
- Size
- 81.1 × 53.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 76
- Pads
- 329
- Tracks, vias
- 660, 101
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Sep 2026
- Updated
- 16 Sep 2026
Overview
ESP32 4 layer is an open-source printed circuit board by JAYARAJ-21, from the JAYARAJ-21/KiCad_PCB_Design repository on GitHub. It is a 4-layer board of 81.1 × 53.6 mm with 90 parts on 76 nets, routed with 660 tracks and 101 vias.
It is built around the ESP32-C3-WROOM-02-H4, BME280 and MAX4466EXK+T, with the W25Q32JVSSIQ, TEMT6000X01 and MCP73871-4CCI/ML among its other parts. Its parts include 32 resistors, 24 capacitors, 7 ICs, 6 diodes and 5 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
11ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesBME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorMAX4466EXK+T
SC-70-5-40℃~+85℃ 0.03% 1-Channel 112dB 2.4V~5.5V 24A SC-70-5 Audio Amplifiers ROHSMaxim Integrated (Analog Devices)Audio AmplifiersW25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHTEMT6000X01
1206-40℃~+100℃ 1.05mm 2mm 3nA 4mm Light Intensity 1206 Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light SensorsMCP73871-4CCI/ML
QFN-20(4x4)-40℃~+85℃ 1 4.1V~6V 4.4V QFN-20(4x4) Battery Management ROHSMicrochip TechnologyBattery ManagementUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)CMC-5042PF-AC
-MicrophonesCUILM1117MPX-3.3/NOPB-HXY
SOT-223-20℃~+85℃ 1.3V@(800mA) 15V 2mA 3.3V 800mA Fixed Thermal Shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHXY MOSFETVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSS-52400-003
SMDUSB ConnectorsBel Fuse
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uf | Capacitor_SMD:C_0805_2012Metric | C4, C5, C7, C10, C13, C15, C16, C17, C18, C19, C20, C21, C22 |
| 7 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R9, R18, R25, R30, R31, R32 |
| 6 | 470R | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R10, R14, R15 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5 |
| 3 | 10uf | Own_Library:T491A_Tantalum_Capacitor | C8, C12, C14 |
| 3 | 2K | Resistor_SMD:R_0805_2012Metric | R2, R28, R29 |
| 3 | 50R | Resistor_SMD:R_0805_2012Metric | R17, R19, R20 |
| 3 | LED | Own_Library:Red_Led | D2, D4, D6 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric | C3, C6 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R26, R27 |
| 2 | 1uf | Capacitor_SMD:C_0805_2012Metric | C9, C23 |
| 2 | 4.7uf | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R21, R22 |
| 2 | 5K1 | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | LED | Own_Library:Blue_Led_ | D1, D5 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R24 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R23 |
| 1 | 10nf | Capacitor_SMD:C_0805_2012Metric | C24 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 20K | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 22K1 | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 4.7uf | Own_Library:T491A_Tantalum_Capacitor | C11 |
| 1 | 47K5 | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | BME280 | Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U6 |
| 1 | BOOT | Own_Library:SW_USLPT2819DT2TR | S2 |
| 1 | CMC-5042PF-AC | Own_Library:CUI_CMC-5042PF-AC | MK1 |
| 1 | CP2102N-Axx-xQFN20 | Own_Library:QFN20_CP2102N_SIL | U3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | EN | Own_Library:SW_USLPT2819DT2TR | S1 |
| 1 | ESP32-C3-WROOM-02-H4 | Own_Library:ESP32-C3-WROOM-02-H4 | U2 |
| 1 | GSD090012SEU_SDcard_Connector | Own_Library:GSD090012SEU_SDCard_connector | J3 |
| 1 | JST_S2B-PH-K-S_LF__SN_ | Own_Library:JST_S2B-PH-K-S_LF__SN_ | J2 |
| 1 | LED | Own_Library:Green_led_LTST-C170GKT | D3 |
| 1 | LM1117MPX-3.3_NOPB | Own_Library:LM1117MPX-3.3_NOPB | VR1 |
| 1 | MAX4466EXK | Own_Library:MAX4466EXX | U7 |
| 1 | MCP73871-4CC | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | Polyfuse | Own_Library:Belfuse_FUSC3225X100N | F1 |
| 1 | R15 | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | SS-52400-003 | Own_Library:BELFUSE_SS-52400-003 | J1 |
| 1 | TEMT6000X01 | Own_Library:TEMT6000X01 | Q1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U5 |
The 87 most common of 90 parts.
More from JAYARAJ-21/KiCad_PCB_Design
1- 2 layers32.9 × 24.3 mm

Similar boards
- 4 layers83 × 53.5 mm

ESP 32 PCB Project
BBIkal/ESP32_IOT_Project
A compact 4-layer mixed-signal PCB designed in KiCad 9, built around the ESP32-C3 module for IoT sensor applications.
92 parts - 4 layers90 × 54.7 mm

1st ESP32 Demo project
ashfaque-ur-rahman/ESP32-Multi-Sensor-PCB
ESP32-based multi-sensor PCB with temperature/humidity, light, and microphone sensors — 4 layer Board — KiCad design based on Tech Explorations tutorial
87 parts - 4 layers84.4 × 53.8 mm

- 4 layers89 × 54.5 mm

- 4 layers77.5 × 59.5 mm

IOT
aryan-asit/Telemetry-iot-project
In this project , a 4 layer custom pcb is made for Telematics
85 parts1 - 4 layers82.9 × 53.8 mm

ESP32 IoT Project
EngMeesh/ESP32_IoT_Dev_Board
A custom 4-layer IoT development board based on the ESP32-C3, featuring integrated LiPo battery management, a CP2102N USB-UART bridge, MicroSD support, and onboard environmental/audio sensors for embedded engineering…
92 parts1MIT - 4 layers78.7 × 53.4 mm

ESP32-project
pravinsharma15k-ops/ESP32-C3-Sensor-Board
Battery-powered ESP32-C3 sensor board with USB-C charging, KiCad 10 design files
88 parts1 - 4 layers85.7 × 58.1 mm

ESP32 IoT 4-layer PCB
SarthakDas2006/ESP32-C3-IoT-Embedded-Custom_PCB
4-layer ESP32-C3 based custom embedded IoT PCB featuring onboard temperature & humidity, light, and audio sensing, USB Type-C, Li-Po charging, and external flash memory.
89 parts1
Questions
How big is the ESP32 4 layer PCB?
It measures 81.1 × 53.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the ESP32 4 layer use?
90 parts, built around the ESP32-C3-WROOM-02-H4, BME280, MAX4466EXK+T and W25Q32JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 4 layer KiCad files?
From the JAYARAJ-21/KiCad_PCB_Design repository on GitHub, at the commit this page was made from: the board is ESP32_4_layer/ESP32_4_layer.kicad_pcb and its schematic Buck_converter/Buck_converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 4 layer design in my own project?
Its repository states no licence, so its author keeps all rights: ask JAYARAJ-21 before reusing the design.