

Proyecto prueba
- Size
- 39.8 × 37.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 9
- Pads
- 33
- Tracks, vias
- 46, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Jun 2025
- Updated
- 5 Jun 2025
Overview
Proyecto prueba is an open-source printed circuit board by IvBarriosUN, from the IvBarriosUN/RPM-Hall-UN repository on GitHub, published under the MIT licence. It is a 2-layer board of 39.8 × 37.6 mm with 15 parts on 9 nets, routed with 46 tracks and 0 vias.
It is built around the BS250. Its parts include 8 transistors, 5 connectors, 1 capacitor and 1 resistor.
Main components
1Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q3, Q4, Q5, Q6 |
| 5 | Conn_01x01_Socket | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1, J2, J3, J4, J5 |
| 3 | BS250 | Package_TO_SOT_THT:TO-92_Inline | Q2, Q7, Q8 |
| 1 | 10KR | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 10nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
More from IvBarriosUN/RPM-Hall-UN
1- 2 layers29 × 20.5 mm

Similar boards
- 2 layers102.1 × 119.4 mm

- 2 layers

- 4 layers151.1 × 71.1 mm

- 2 layers125 × 72 mm

GPS Tracker V1
Amazon-Master/gps-rtk-tracker
Firmware, dashboard, and prototype PCB files for a portable RTK GNSS tracker built around a Heltec WiFi LoRa 32 V4 and a Waveshare/Quectel LG290P receiver.
48 parts1MIT - 2 layers55 × 34 mm

KnurCAN V2
chrumck/KnurDash
A racing logger for an ND2 Mazda MX-5, integrating wide ranging functionality into one unit:
23 parts1MIT - 2 layers190 × 95 mm

Eausure measurement node
adam-dev-hub/eausure-v1
Complete IoT water quality monitoring ecosystem spanning embedded firmware, LoRa gateways, cloud APIs, mobile/web supervision, and PCB/mechanical design.
53 parts - 2 layers100.4 × 100 mm

ECE4450 FinalProject
bakerbass/ece4450filter
This project is to create a functioning circuit on a Tangible Waves form-factor module.
64 parts - 2 layers109 × 64 mm

Hyundai Dash V1.1
eymenyg/sim_dash
Download hyundaidashv1bng .zip from the Releases page and copy it to:
29 parts
Questions
How big is the Proyecto prueba PCB?
It measures 39.8 × 37.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Proyecto prueba use?
15 parts, built around the BS250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Proyecto prueba KiCad files?
From the IvBarriosUN/RPM-Hall-UN repository on GitHub, at the commit this page was made from: the board is archivos electro/PCBs/Proyecto_prueba/Proyecto_prueba.kicad_pcb and its schematic archivos electro/PCBs/Divisor pcb/Divisor pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Proyecto prueba design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).