Skip to the content
2 layers34 × 34 mmThe zapfish, the printed circuit board in 3D

An AC-to-DC Variable Power Supply (3V–12V) ⚡︎ ˖ ࣪

Size
34 × 34 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
8
Pads
20
Tracks, vias
30, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Jun 2026
Updated
23 Jun 2026

Overview

The zapfish is an open-source printed circuit board by ItsKareem, from the ItsKareem/the-zapfish-variable-supply repository on GitHub. It is a 2-layer board of 34 × 34 mm with 8 parts on 8 nets, routed with 30 tracks and 0 vias.

It is built around the LM317 and KBP210. Its parts include 2 diodes, 2 connectors, 1 capacitor, 1 resistor and 1 IC.

Main components

2

Parts

8
QtyValueFootprintReferences
12200uCapacitor_THT:CP_Radial_D12.5mm_P5.00mmC1
1240Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_VerticalR1
15kPotentiometer_THT:Potentiometer_Vishay_T93YA_VerticalRV1
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ3
1Conn_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_HorizontalJ2
1DDiode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD2
1KBP210Bridge_Rectifier:SIP380W81P386L1470H1270Q4D1
1LM317LM317:TO-220U1

Similar boards

  • 2 layers70 × 50 mmS88iso, the printed circuit board in 3D

    S88iso

    GBert/railroad

    git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run

    33 parts36
  • 2 layers100 × 35 mmTwo comparator effect, the printed circuit board in 3D

    Two comparator effect

    cyberboy666/two_comparator_effect

    analog video posterisation effect - adapted from a rob schafer design

    34 parts15GPL-3.0
  • 2 layersAlim10o, the printed circuit board in 3D

    Alim10o

    acmo0/PedalBoard-Power-Supply-Diy

    This is a description of pedalboard power supplies that I designed an made. I use this power supplies, they are fully working. Pay attention : they are made for 230VAC.

    110 parts14GPL-3.0
  • 2 layers32 × 42 mmNoahFC, the printed circuit board in 3D

    NoahFC

    zosko/NoahFC

    NoahFC - Atmega328 based Flight Controller

    52 parts12GPL-3.0
  • 2 layers300 × 90 mmPreamp, the printed circuit board in 3D

    Preamp

    profdc9/PrettyGoodPreamplifier

    A Pretty Good Preamplifier for Stereo and Subwoofer Use

    222 parts10
  • 2 layers120 × 50 mmAudioswitch, the printed circuit board in 3D

    Audioswitch

    zehome/autoaudioswitcher

    OSHW: Automatic audio input switcher based on audio activity

    80 parts10BSD-3-Clause
  • 2 layers30 × 128.5 mmKwantizer, the printed circuit board in 3D

    Kwantizer

    benjiaomodular/Kwantizer

    [WIP] An Arduino-based CV quantizer for Eurorack modular synthesizers

    32 parts7
  • 2 layers110 × 92.7 mmYaacwk, the printed circuit board in 3D

    Yaacwk

    federicobriata/iz1glg_yaacw_keyer

    YAACWK, Yet Another Arduino CW Keyer, the cheapest HW stuff compatible with K3ng keyer software ( https://github.com/k3ng/k3ng_cw_keyer ). This project contain Eagle project and library of YAACWK.

    87 parts7CC-BY-SA-4.0

Questions

How big is the The zapfish PCB?

It measures 34 × 34 mm and has 2 copper layers, 1.6 mm thick.

What parts does the The zapfish use?

8 parts, built around the LM317 and KBP210. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the The zapfish KiCad files?

From the ItsKareem/the-zapfish-variable-supply repository on GitHub, at the commit this page was made from: the board is pcb/the-zapfish.kicad_pcb and its schematic pcb/the-zapfish.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the The zapfish design in my own project?

Its repository states no licence, so its author keeps all rights: ask ItsKareem before reusing the design.