

CoolingBoxWireOrganizer
- Size
- 89.9 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 136
- Pads
- 320
- Tracks, vias
- 634, 266
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 May 2024
- Updated
- 25 Oct 2024
Overview
CoolingBoxWireOrganizer is an open-source printed circuit board by Itaru-Kitano, from the Itaru-Kitano/CoolingBoxWireOrganizer repository on GitHub. It is a 2-layer board of 89.9 × 53.3 mm with 67 parts on 136 nets, routed with 634 tracks and 266 vias.
It is built around the MAX31855KASA+T and DILB16P-223TLF. Its parts include 23 connectors, 20 resistors, 8 inductors, 7 diodes and 5 capacitors.
Main components
2MAX31855KASA+T
SO-8-40℃~+125℃ 14 1500uA 3V~3.6V Built-in temperature sensor SPI Thermocouple-to-Digital Converter SO-8 ADCs/DACs - Special Purpose ROHSMaxim Integrated (Analog Devices)ADCs/DACs - Special PurposeDILB16P-223TLF
插件-55℃~+105℃ 16P 2.54mm 7.62mm Copper alloy DIP Square Hole 插件 IC / Transistor Socket ROHSAmphenolIC / Transistor Socket
README
README.mdCoolingBoxWireOrganizer
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 390 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6, R7, R8, R9, R10, R11 |
| 8 | L_Ferrite | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1, L2, L3, L4, L5, L6, L7, L8 |
| 7 | D | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D8 |
| 6 | 10000 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R12, R13, R15, R17, R19 |
| 5 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6, J7, J8, J10, J13 |
| 4 | 0.01u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5 |
| 4 | 1000 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R16, R18, R20 |
| 4 | Conn_01x02 | my_expanded_footprint_library:Molex_Pico-Clasp_501331-0207_1x02-1MP_P1.00mm_Vertical | J14, J17, J21, J22 |
| 4 | MAX31855KASA | my_expanded_footprint_library:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4 |
| 3 | Conn_02x02_Odd_Even | my_expanded_footprint_library:Molex_Pico-Clasp_501331-0407_1x04-1MP_P1.00mm_Vertical | J1, J11, J16 |
| 3 | DILB16P-223TLF | my_library:AMPHENOL_DILB16P-223TLF | J18, J19, J23 |
| 2 | Conn_01x02 | Connector_Molex:Molex_Micro-Fit_3.0_43045-0215_2x01_P3.00mm_Vertical | J2, J4 |
| 2 | Conn_02x03_Odd_Even | Connector_Molex:Molex_Micro-Fit_3.0_43045-0615_2x03_P3.00mm_Vertical | J9, J12 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 1800 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 3900 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | Conn_01x08 | my_expanded_footprint_library:Molex_Pico-Clasp_501331-0807_1x08-1MP_P1.00mm_Vertical | J3 |
| 1 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J5 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J20 |
| 1 | Conn_02x18_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical | J15 |
Similar boards
- 4 layers154.1 × 161.7 mm

- 4 layers100 × 100 mm

Uaefi
rusefi/uaefi
🔴Community support ONLY 🔴 https://www.facebook.com/groups/rusEfi 🔴 Discord🔴 Commercial Support 🔴
171 parts39 - 2 layers65.5 × 50 mm

- 2 layers60 × 90 mm

Logger
voltlog/Voltlogger
More info about this project in Voltlog #368. If you would like to order one of these boards ready assembled, check out my Tindie store.
111 parts17GPL-3.0 - 4 layers43 × 89 mm

ReflowControllerV2
walclu/smartReflow
Repository for STM32WB55 based reflow toaster oven controller.
99 parts15 - 2 layers

- 4 layers28.2 × 85.1 mm

- 2 layers80 × 61 mm

Usb thermo logger
richardklingler/usbthermocouple
This is my first ever published project on Github, so most probably not error free (o;
61 parts11GPL-3.0
Questions
How big is the CoolingBoxWireOrganizer PCB?
It measures 89.9 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CoolingBoxWireOrganizer use?
67 parts, built around the MAX31855KASA+T and DILB16P-223TLF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CoolingBoxWireOrganizer KiCad files?
From the Itaru-Kitano/CoolingBoxWireOrganizer repository on GitHub, at the commit this page was made from: the board is CoolingBoxWireOrganizer.kicad_pcb and its schematic CoolingBoxWireOrganizer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CoolingBoxWireOrganizer design in my own project?
Its repository states no licence, so its author keeps all rights: ask Itaru-Kitano before reusing the design.