Skip to the content
2 layers50 × 50 mmLumiGuard, the printed circuit board in 3D

LumiGuard's goal is to provide a comprehensive solution for applications requiring: Efficient UV disinfection. Adjustable white lighting. Intelligent security. Energy efficiency.

Size
50 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
36
Pads
128
Tracks, vias
365, 99
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
29 Mar 2025
Updated
9 Apr 2025

Overview

LumiGuard is an open-source printed circuit board by IsmelArab, from the IsmelArab/LumiGuard-Intelligent-Dual-UV-White-Control-System repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 50 × 50 mm with 41 parts on 36 nets, routed with 365 tracks and 99 vias.

It is built around the ATTINY85V-10SU, VCNL4040-SB and AP2112K-3.3, with the DMN3010LFG, SMAJ5.0A and 1N4148W among its other parts. Its parts include 10 resistors, 8 diodes, 5 capacitors, 3 ICs and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

8

README

README.md

LumiGuard-Intelligent-Dual-UV-White-Control-System

Project Objective:

LumiGuard's goal is to provide a comprehensive solution for applications that require:

Efficient UV disinfection: Using short-wavelength ultraviolet light (275 nm) to eliminate pathogens without risk to operators.

Adjustable white lighting: For real-time process visualization.

Smart security: Proximity detection automatically deactivates UV light if an operator approaches.

Energy efficiency: PWM control of LEDs and low-power mode.

Key Components and Technologies:

The heart of LumiGuard integrates modern technologies and high-quality components:

ATtiny85 Microcontroller:

The brain of the system manages operating modes, PWM signals, and I2C communication.

VCNL4040 Proximity Sensor:

Detects human presence up to 20 cm away, activating safety protocols.

Specialized LEDs:

UV (275 nm): For disinfection.

White (5630 SMD): For cool, adjustable lighting.

MOSFET Control (DMN3010LSS):

Adjusts light intensity via PWM, minimizing energy losses

Professional PCB Design:

2 layers with a solid ground plane.

Noise filtering, analog/digital separation, and custom silkscreen printing.

Programming Interface (USBasp):

ISP connector for firmware updates.

Parts

41
QtyValueFootprintReferences
4100Resistor_SMD:R_0603_1608MetricR6, R7, R8, R12
3DMN3010UV:SOIC127P600X175-8NQ1, Q2, Q3
20.1uFCapacitor_SMD:C_0805_2012MetricC7, C9
210kResistor_SMD:R_0603_1608MetricR10, R13
2150Resistor_SMD:R_0603_1608MetricR9, R11
22.2kResistor_SMD:R_0603_1608MetricR4, R5
2GW_JTLMS3UV:GWJTLMS3CMG6G9XX5101LED2, LED4
2SMAJ5.0ADiode_SMD:D_SMAD5, D6
2VLMU35UV:VLMU35CL20275120LED3, LED6
1100uFCapacitor_SMD:CP_Elec_6.3x5.3C1
1100uHInductor_SMD:L_0603_1608MetricL2
11N4148WDiode_SMD:D_SOD-123D1
11uFCapacitor_SMD:C_0805_2012MetricC5
12.2uFCapacitor_SMD:C_1206_3216MetricC8
12AInductor_SMD:L_0603_1608MetricFB1
1AP2112KPackage_TO_SOT_SMD:SOT-23-5U1
1ATtiny85V-10SPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU3
1BAT54SPackage_TO_SOT_SMD:SOT-23D2
1BuzzerBuzzer_Beeper:MagneticBuzzer_ProSignal_ABI-009-RCBZ1
1Conn_01x02_PinConnector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_VerticalJ1
1LOGOImagen:Logo10G***
1LOGOImagen:Logo9G***
1TSW-106-08-F-SConnector_PinHeader_1.00mm:PinHeader_1x06_P1.00mm_Vertical_SMD_Pin1LeftSPI1
1Test_3.3VTestPoint:TestPoint_Pad_2.0x2.0mmTP2
1Test_5VTestPoint:TestPoint_Pad_2.0x2.0mmTP1
1Test_AGNDTestPoint:TestPoint_Pad_2.0x2.0mmTP4
1Test_DGNDTestPoint:TestPoint_Pad_2.0x2.0mmTP3
1USB_CConnector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_HorizontalJ2
1VCNL4040UV:VCNL4040M3OEH3IC1

Similar boards

  • 2 layers44.6 × 39.9 mmSensactUpRingEncoder, the printed circuit board in 3D

    SensactUpRingEncoder

    klaus-liebler/sensact

    Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…

    68 parts4Apache-2.0
  • 4 layers106 × 63.5 mmBrineomatic, the printed circuit board in 3D

    Brineomatic

    hoeken/brineomatic

    Open Source Watermaker Controller.

    323 parts47LGPL-2.1
  • 2 layers100.6 × 131 mmHabitat V5, the printed circuit board in 3D

    Habitat V5

    machadoleonardo94/HabitatControl-hardware

    Hardware files for HabitatControl, designed on DipTrace

    161 parts1
  • 2 layers70 × 54.5 mmReckoner, the printed circuit board in 3D

    Reckoner

    blind-reckoning/Reckoner

    Turns press-and-hold motorised blinds into Home Assistant covers. One Reckoner per blind, hidden in the wall box behind the buttons you already have.

    92 partsCERN-OHL-S-2.0
  • 2 layers110 × 85 mmAvtech agv carrier, the printed circuit board in 3D

    Avtech agv carrier

    eerdemgundogdu/avtech-agv-main

    Software and carrier PCB design for a line-following forklift AGV built by CU AVTECH for the Sanayide Robotik Uygulamalar 2026 competition.

    84 partsMIT
  • 2 layers125 × 125 mmJbc station, the printed circuit board in 3D

    Jbc station

    hrandib/jbc_station

    3 channel universal soldering station for T12, T115, T210, T245, T470 handles

    290 parts17GPL-3.0
  • 2 layers77 × 80 mmDLTM Old, the printed circuit board in 3D

    DLTM Old

    poakzmmz/NS26F-Datalogger-HW

    NS26F Datalogger HW

    108 parts

Questions

How big is the LumiGuard PCB?

It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LumiGuard use?

41 parts, built around the ATTINY85V-10SU, VCNL4040-SB, AP2112K-3.3 and DMN3010LFG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LumiGuard KiCad files?

From the IsmelArab/LumiGuard-Intelligent-Dual-UV-White-Control-System repository on GitHub, at the commit this page was made from: the board is Proyecto LumiGuard KiCad/LumiGuard.kicad_pcb and its schematic Proyecto LumiGuard KiCad/LumiGuard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LumiGuard design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).