
Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

This is a MH-Z19B, CO2 sensor, a DHT22, humidity and temperature sensor; connected at a nodemcu with a oled screen.
Schema PCP CO2 is an open-source printed circuit board by InnoGreenTech, from the InnoGreenTech/CO2-DHT22-ESP-sensor repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 43 × 70 mm with 4 parts on 32 nets, routed with 64 tracks and 2 vias.
It is built around the DHT22. Its parts include 2 ICs and 1 connector. It belongs with the sensors and measurement and lEDs and displays boards and the ESP8266 boards of this library.
This is a MH-Z19B, CO2 sensor, a DHT22, humidity and temperature sensor; connected at a nodemcu with a oled screen.
It have a interface web and an update by http interface. It is possible to connect it in Modbus.
You can found more information on my web site on this page
I share also the drawing, the pcb, and the box designe in this repository.

Fork it Create your feature branch (git checkout -b my-new-feature) Commit your changes (git commit -am 'Add some feature') Push to the branch (git push origin my-new-feature) Create new Pull Request
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | CO2_Meter | ES8266:MHZ19B | J1 |
| 1 | DHT22 | ES8266:DHT22_Temperature_Humidity | TH1 |
| 1 | NodeMCU_1.0_(ESP-12E) | ES8266:NodeMCU-LoLinV3 | U1 |
| 1 | SSD1306 | Display:SSD1306 | U2 |

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

justinmklam/iot-sourdough-starter-monitor
Tracking the fermentation of sourdough starter over the cloud.

MakersAsylumIndia/M19O2
M19O2 open source hardware Oxygen Concentrator based on the Pressure Swing Adsorption cycle aka Skarstorm cycle

kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome

felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.

AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules

Finomnis/AirQualitySensor
Simple Air Quality sensor based on nRF52840, Zigbee, AM2302/DHT22 and Senseair S8
It measures 43 × 70 mm and has 2 copper layers, 1.6 mm thick.
4 parts, built around the DHT22. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the InnoGreenTech/CO2-DHT22-ESP-sensor repository on GitHub, at the commit this page was made from: the board is schema_PCB_CO2/schema_PCP_CO2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).