2 layers151 × 100 mm
Led board
InfraredAces/GP2040-CE-projects
Various GP2040-CE Hardware Projects and Accessories
37 parts2
2 layers77 × 72 mm
PXN X9-GP2040-CE
InfraredAces/GP2040-CE-projects2Various GP2040-CE Hardware Projects and Accessories
- Size
- 77 × 72 mm
- Copper layers
- 2
- Thickness
- 1.69 mm
- Parts
- 52
- Nets
- 57
- Pads
- 238
- Tracks, vias
- 689, 56
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Nov 2023
- Updated
- 31 May 2025
Overview
PXN X9-GP2040-CE is an open-source printed circuit board by InfraredAces, from the InfraredAces/GP2040-CE-projects repository on GitHub. It is a 2-layer board of 77 × 72 mm with 52 parts on 57 nets, routed with 689 tracks and 56 vias.
It is built around the RP2040, W25Q128JVSIQ and TLV73333PDBV. Its parts include 16 capacitors, 14 connectors, 9 resistors, 3 ICs and 3 switches. It belongs with the RP2040 boards of this library.
Main components
3
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
TLV73333PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 125mV@(300mA) 28uVrms 3.3V 300mA 34uA 5.5V 50dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C5, C6, C7, C9, C10, C11, C14 |
| 4 | 1u | Capacitor_SMD:C_0402_1005Metric | C2, C8, C12, C13 |
| 3 | SW_Push_Open | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1, SW2, SW3 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 4.7K | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 2 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J12, J13 |
| 2 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J10, J11 |
| 2 | Conn_01x05 | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1, J4 |
| 2 | MountingHole | MountingHole:MountingHole_6.4mm_M6 | H2, H3 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | Conn_01x03 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J2 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x04 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J5 |
| 1 | Conn_01x08 | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J6 |
| 1 | Conn_01x10 | Connector_JST:JST_PH_B10B-PH-K_1x10_P2.00mm_Vertical | J7 |
| 1 | Conn_02x08_Counter_Clockwise | Connector_JST:JST_PUD_B16B-PUDSS_2x08_P2.00mm_Vertical | J3 |
| 1 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J8 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | LOGO | Logo:gp2040-ce-logo-inside-BW | G*** |
| 1 | LOGO | Logo:InfraredAces-logo-11.5x9mm | G*** |
| 1 | RP2040 | RP2040:RP2040-QFN-56 | U1 |
| 1 | Screw_Terminal_01x05 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-5_1x05_P2.54mm_Horizontal | J14 |
| 1 | TLV73333PDBV | SOT-23-5:SOT-23-5 | U2 |
| 1 | W25Q128JVS | Package_SO:SOP-8_5.28x5.23mm_P1.27mm | U3 |
More from InfraredAces/GP2040-CE-projects
4- 2 layers36 × 26 mm
TinyController
InfraredAces/GP2040-CE-projects
Various GP2040-CE Hardware Projects and Accessories
23 parts2 - 2 layers25 × 19.8 mm
USBC6PAdapterBoard
InfraredAces/GP2040-CE-projects
Various GP2040-CE Hardware Projects and Accessories
7 parts2 - 2 layers17 × 18 mm
Usb c replacement
InfraredAces/GP2040-CE-projects
Various GP2040-CE Hardware Projects and Accessories
5 parts2
Similar boards
- 2 layers44 × 44 mm
- 2 layers233.2 × 147.7 mm
ErgoSHIFT rgb
mizma/ergoSHIFT
11 button leverless controller with shifted home position
84 parts19CC-BY-SA-4.0 - 2 layers305.8 × 187.2 mm
- 2 layers236 × 147 mm
- 2 layers280 × 184.5 mm
- 2 layers232 × 123.6 mm
- 2 layers157.1 × 131.4 mm
SlimDash rev1-kicad rounded
mizma/SlimDash
ErgoDash inspired low-profile key switch keyboard with embedded RP2040
146 partsCC-BY-SA-4.0 - 2 layers25 × 25 mm
Remapper
techmech-keeb/orbit-remapper
Desktop BLE-to-USB keyboard/mouse remapper on M5Dial (ESP32-S3), built on HID Remapper.
49 parts2MIT
Questions
How big is the PXN X9-GP2040-CE PCB?
It measures 77 × 72 mm and has 2 copper layers, 1.69 mm thick.
What parts does the PXN X9-GP2040-CE use?
52 parts, built around the RP2040, W25Q128JVSIQ and TLV73333PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PXN X9-GP2040-CE KiCad files?
From the InfraredAces/GP2040-CE-projects repository on GitHub, at the commit this page was made from: the board is PXN-X9/kicad/PXN-X9-PCB/PXN-X9-GP2040-CE.kicad_pcb and its schematic GP2040 Keyboard Converter/Waveshare Zero-PCB/kicad/GP2040-Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PXN X9-GP2040-CE design in my own project?
Its repository states no licence, so its author keeps all rights: ask InfraredAces before reusing the design.