2 layers42 × 67 mm
2 layers65 × 50 mm
MAVRIC Camera
ISU-MAVRIC/MAVRIC_Camera2Hardware and firmware for MAVRIC's camera system
- Size
- 65 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 45
- Pads
- 253
- Tracks, vias
- 337, 50
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 1 Sep 2013
- Updated
- 11 Dec 2014
Overview
MAVRIC Camera is an open-source printed circuit board by ISU-MAVRIC, from the ISU-MAVRIC/MAVRIC_Camera repository on GitHub. It is a 2-layer board of 65 × 50 mm with 65 parts on 45 nets, routed with 337 tracks and 50 vias.
It is built around the PIC32MX250F128D-I/ML and AOZ1031AI. Its parts include 25 capacitors, 18 resistors, 5 ICs, 5 connectors and 3 inductors. It belongs with the PIC boards of this library.
Main components
2
PIC32MX250F128D-I/ML
QFN-44-EP(8x8)-40℃~+85℃ 10bit 128KB 2.3V~3.6V 32 Bit 32KB 33 40MHz Built-in FLASH MIPS32 M4K QFN-44-EP(8x8) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AOZ1031AI
SOIC-8-40℃~+85℃ 1 1.6mA 3A 4.5V~18V 500kHz~700kHz 800mV~18V Adjustable Buck Buck Built-in SOIC-8 DC-DC Converters ROHSAlpha & Omega SemiconductorDC-DC Converters
README
README.mdMAVRIC_Camera
Hardware and firmware for MAVRIC's camera system
Hardware design files use the Aerodyne Labs KiCad library
Based off the Fubarino Mini
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 22uF | CAPC3216 | C1, C2, C15, C16, C18, C19, C21, C22, C23, C24, C25 |
| 11 | R | RESC2012 | R1, R3, R4, R9, R11, R12, R14, R15, R16, R17, R18 |
| 7 | 10k | RESC2012 | R2, R5, R6, R7, R8, R10, R13 |
| 6 | 0.1uF | CAPC2012 | C5, C6, C10, C12, C13, C14 |
| 4 | VAL** | MECH-HOLE220 | MECH-HOLE220-1, MECH-HOLE220-2, MECH-HOLE220-3, MECH-HOLE220-4 |
| 3 | AOZ1031 | SOIC127P600-8N | U3, U4, U5 |
| 3 | C | CAPC2012 | C3, C17, C20 |
| 2 | 18pF | CAPC2012 | C8, C9 |
| 2 | 22uH | INDC-NR8040 | L2, L3 |
| 2 | LED | LEDC2012 | D1, D2 |
| 1 | 10nF | CAPC2012 | C4 |
| 1 | 10uF | CAPC2012 | C11 |
| 1 | 2.2nF | CAPC2012 | C7 |
| 1 | 33uH | INDC-SRN4018 | L1 |
| 1 | 8MHz | XTAL-2SMD-60x35 | X1 |
| 1 | CAMERA | CONN-6200-09-SMT | J2 |
| 1 | ICSP-PIC | HDRV5W38P254_5X1-LOCK | J4 |
| 1 | MASTER | CONN-WM5576 | J1 |
| 1 | MPU9150 | PQFN50P400X400X110-24N | U2 |
| 1 | PIC32MX250F128D | QFP80P1200x1200-44N | U1 |
| 1 | PRGM | SW-EVQP7 | SW1 |
| 1 | RESET | SW-EVQP7 | SW2 |
| 1 | SERVO | CONN-WM5576 | J3 |
| 1 | USB_MINI | CONN-USB-M26FTR | J5 |
Similar boards
- 2 layers198.1 × 30.5 mm
Splitflap driver
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
65 parts744MIT - 2 layers74.8 × 32.5 mm
- 2 layers60 × 100 mm
V3 Connector Only
PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)
65 parts439GPL-2.0 - 2 layers45 × 58.2 mm
- 2 layers27.9 × 101.6 mm
- 2 layers40 × 120 mm
Photodiode board v3
0x23/nmWave-Interferometer
An Open Source Interferometer for Accurate Distance Measurements
65 parts151MIT - 2 layers78 × 130 mm
Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT
Questions
How big is the MAVRIC Camera PCB?
It measures 65 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MAVRIC Camera use?
65 parts, built around the PIC32MX250F128D-I/ML and AOZ1031AI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MAVRIC Camera KiCad files?
From the ISU-MAVRIC/MAVRIC_Camera repository on GitHub, at the commit this page was made from: the board is Hardware/MAVRIC_Camera.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MAVRIC Camera design in my own project?
Its repository states no licence, so its author keeps all rights: ask ISU-MAVRIC before reusing the design.