
Duct turbo fan controller v4
scattym/kicad-duct-turbo-fan-controller
Fan controller projects for the duct turbo, terrabloom and ac infinity fans

pcb design
Iot node versie1 is an open-source printed circuit board by IOT-Clean-Air, from the IOT-Clean-Air/pcb-design repository on GitHub. It is a 2-layer board with 44 parts on 27 nets, routed with 355 tracks and 12 vias.
It is built around the ESP32-C3-WROOM-02-H4, BME680 and EKMB1305112K. Its parts include 9 resistors, 8 capacitors, 4 ICs, 3 switches and 2 connectors. It belongs with the home automation and IoT boards and the ESP32 and RISC-V boards of this library.
pcb design
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | TestPoint | Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R5, R7, R8 |
| 3 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C6 |
| 3 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R6 |
| 3 | SW_Push | 434111043826:434111043826 | SW1, SW2, SW3 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R9 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | BME680 | BME680:PSON80P300X300X100-8N | U4 |
| 1 | Buzzer | SamacSys_Parts:AX1203DLF | BZ1 |
| 1 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | DG3XX-02-5.0 | degson:degson-DG306-5.0-02P | X1 |
| 1 | EKMB1305112K | Library:EKMB1305112K | U3 |
| 1 | ESP32-C3-WROOM-02 | esp:ESP32-C3-WROOM-02 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LP2989IMX-3.3/NOPB | LP2989IMX-3:SOIC127P600X175-8N | U2 |

scattym/kicad-duct-turbo-fan-controller
Fan controller projects for the duct turbo, terrabloom and ac infinity fans


jfm92/everAliveSensor
Solar-powered BLE environmental sensor (temp, humidity, pressure) with a 50F supercapacitor — potentially infinite lifetime, 19-day dark autonomy. ESP32 + BME680. Experimental.


teapotlaboratories/bwlr3d
Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting



44 parts, built around the ESP32-C3-WROOM-02-H4, BME680 and EKMB1305112K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IOT-Clean-Air/pcb-design repository on GitHub, at the commit this page was made from: the board is iot node/iot node_versie1.kicad_pcb and its schematic iot node/iot node.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask IOT-Clean-Air before reusing the design.