

S-Band RHCP 2.45 GHz Patch Antenna for 1U CubeSats
- Size
- 82.4 × 89.4 mm
- Copper layers
- 2
- Thickness
- 1.61 mm
- Parts
- 8
- Nets
- 2
- Pads
- 42
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 4 Jun 2026
- Updated
- 5 Jun 2026
Overview
Antenna is an open-source printed circuit board by ICDT-Inatel-Cubesat-Design-Team, from the ICDT-Inatel-Cubesat-Design-Team/S-Band-Antenna repository on GitHub, published under the CERN-OHL-W-2.0 licence. It is a 2-layer board of 82.4 × 89.4 mm with 8 parts on 2 nets.
It belongs with the radio and wireless boards of this library.
README
README.md
S-Band RHCP 2.45 GHz Antenna
Overview • Repository Organization • Releases • References • License
Overview
This project involves the development of an S-band antenna tailored for a 1U CubeSat platform. The system is engineered to handle both uplink and downlink capabilities using LoRa technology, specifically optimized for integration with the E80-900M2213S module.
Technical Parameters
- Center Frequency: 2.45 GHz
- Axial Ratio Bandwidth: 14 MHz (2443 – 2457 MHz for AR < 3 dB)
- Peak Realized Gain: 7.58 dBi
- Polarization: Right-Hand Circular Polarization (RHCP)
- Connector Type: Right-Angle SMA
Repository Organization
docs: Technical documentation and datasheets.hardware: Core hardware files.3D: 3D models (.step).Fabrication: BOM and Gerber files for JLCPCB manufacturing.PCB: KiCad schematics and layout design.
simulation: Ansys HFSS simulation and data files.
Releases
| Render | Board Name | Status | Latest Release | Date | Datasheet | BOM | Ordering Info |
|---|---|---|---|---|---|---|---|
![]() | S-Band Antenna v1 | 🧪 Testing | v1.0 | 05-06-2026 | Yes | GERBER (JLCPCB) |
References
This project was based on the SpaceLab UFSC S-Band Antenna Project, with special thanks to Lucas Ryan (SpaceLab) and Yunior Alcantara (SpaceLab) for their assistance with the SMA connectors.
Missions Associated with this Project
License
This project is licensed under the permissive, weakly-reciprocal CERN-OHL-W-2.0 open-hardware license. You are free to modify and distribute these files, provided downstream hardware design modifications remain under the same terms.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | Antenna | Antenna-Footprints:2.4GHz-Antenna | A1 |
| 1 | SMA | Antenna-Footprints:SMA-TH_BWSMA-KWE-Z001 | U1 |
Similar boards
- 2 layers20.5 × 24.8 mm

- 2 layers14.4 × 10.5 mm

OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm

Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm

USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm

7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm

PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm

PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0
Questions
How big is the Antenna PCB?
It measures 82.4 × 89.4 mm and has 2 copper layers, 1.61 mm thick.
What parts does the Antenna use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Antenna KiCad files?
From the ICDT-Inatel-Cubesat-Design-Team/S-Band-Antenna repository on GitHub, at the commit this page was made from: the board is hardware/PCB/Antenna.kicad_pcb and its schematic hardware/PCB/Antenna.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Antenna design in my own project?
Its repository publishes it under the CERN-OHL-W-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).



